Page 1
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696- 2000 Fax 847-696- 9278 www.chemi-con.com FH1
FH
OS-CON
TM
-105&C
FH OS-CON
TM
Series
The FH series is an OS-CONTMseries designed for a longer useful lifetime compared to the other
OS-CONTMseries. The FH series capacitors with a 5,000 hour lifetime at 105&C also have a very low
impedance, making these capacitors ideal for use in low profile DC-DC converters as well as stereo
and video recorder applications. These capacitors can also be used in filter circuits of switching
power supplies.
The FH series capacitors were developed to withstand HCFC cleaning agents for five minutes
by ultrasonic, vapor or immersion. This solvent proof design allows all circuit board components
to be cleaned together at the same time. Refer to the Mini-Glossary for recommended cleaning
conditions and guidelines.
n
OS-CON
TM
n
Low
Impedance
n
5,000 Hour
Rated Lifetime
n
Solvent Proof
n
~
105&C
Maximum
Temperature
Actual
Size
n
Radial lead terminals.
n
Capacitance range: 15 to 330µF.
n
Voltage range: 6.3 to 25VDC.
n
Category temperature range: !55&Cto~105&C.
n
Leakage current: After 2 minutes with rated voltage applied at~20&C, see ratings
tables for leakage current values.
n
Standard capacitance tolerance: %20%
n
Nominal case size (D@L): 6.3@9.8mm to 10@10.5mm.
n
Rated lifetime: 5,000 hours at~105&C.
Summary of Specifications
Page 2
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696- 2000 Fax 847-696- 9278 www.chemi-con.comFH2
FH Series
FH
OS-CON
TM
-105&C
FH Specifications
Item
Category Temperature Range
!
55 to~105 &C
Rated Voltage Range 6.3 to 25VDC
Capacitance Range 15 to 330mF
Capacitance Tolerance
%
20% (M) at~20&C, 120Hz
Leakage Current After 2 minutes with rated voltage applied at~20&C, see Ratings Tables for specified values.
Characteristics
Moisture Resistance The following specifications shall be satisfied when the capacitors are restored to~20&C
after exposing them for 1,000 hours at~60&C, 90-95RH without voltage applied. The rated
voltage shall be applied to the capacitors for a minimum of 30 minutes at~105 &C.
Capacitance change: ≤
%
10% of initial measured value
Tan d (DF) : ≤ 150% of initial specified value
Leakage current : ≤ initial specified value
Endurance
(Load Life)
The following specifications shall be satisfied when the capacitors are restored to~20&C after
subjecting them to the DC rated voltage for 5,000 hours at~105 &C. (20V shall be applied for
the capacitors with a 25V rating.)
Capacitance change: ≤
%
30% of initial measured value
Tan d (DF) : ≤ 150% of initial specified value
Leakage current : ≤ 500% of initial specified value
Rated Voltage (V )
Z(!55&C)/Z(~20&C)
Z(~105 &C)/Z(~20&C)
6.3-25
1.00-1.25
0.75-1.00
Temperature
Characteristics
At 100kHz, impedance (Z ) ratio between the!55&C or~105 &C value and~20&C value shall
not exceed the values given below.
Rated Ripple Current Multipliers
Refer to Section 4 of the
Mini-Glossary for explanation of
Rated Ripple Current Multipliers.
Ambient Temperature (&C)
≤
~
45&C
1.0
~
85&C
0.7
~
95&C
0.4
~
10 5&C
0.25
VB/ Radial Lead
Unit: mm
Diagram of Dimensions
15 MIN.
PVC Sleeve
L
'
L
d
DD
'
F
: Standard position of lead terminals
: Actual position of lead terminals A & A'
: Middle point C between A & A'
4 MIN.
G
F
K
A'
A
C
For optional lead configurations and
tape and ammo packaging, refer to
the beginning of the Miniature section.
ØD
6.3
8
10
ØD
'
max.
ØD
~
0.5
ØD
~
0.5
ØD
~
0.5
L
'
max.
L~1.0
L~1.0
L~1.0
Ød
0.5
0.6
0.6
F%0.5
2.5
3.5
5.0
G max.
0.5
0.5
0.5
K max.
0.5
0.5
0.5
Page 3
FH Series
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696- 2000 Fax 847-696- 9278 www.chemi-con.com FH3
FH
OS-CON
TM
-105&C
150 6FH150M 8 @ 10.5 18.9 30 2,780
330 6FH330M 10 @ 10.5 41.6 25 3,500
6.3 Volts
8 Volts Surge
68 10FH68M 6.3 @ 9.8 13.6 50 2,000
220 10FH220M 10 @ 10.5 44.0 27 3,370
10 Volts
13 Volts Surge
*
The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
33 20FH33M 6.3 @ 9.8 13.2 70 1,710
47 20FH47M 8 @ 10.5 18.8 40 2,450
68 20FH68M 8 @ 10.5 27.2 36 2,600
100 20FH100M 10 @ 10.5 40.0 30 3,210
20 Volts
25 Volts Surge
15 25FH15M 6.3 @ 9.8 7.5 70 1,650
25 Volts
32 Volts Surge
Capacitance Tolerance: M =%20%
Capacitance Value: Expressed in Microfarads. An R indicates a
decimal point (e.g. 2R2 = 2.2mF).
Series Name: Indicates Basic Capacitor Design.
DC Rated Voltage: Expressed in Volts (e.g. 10 = 10WVDC).
Note: Prefix code 6 indicates 6.3WVDC products.
Part Numbering System for FH Series When ordering, always specify complete catalog number for FH Series.
10 FH 220 M
47 16FH47M 6.3 @ 9.8 15.0 60 1,830
100 16FH100M 8 @ 10.5 32.0 30 2,740
150 16FH150M 10 @ 10.5 48.0 28 3,260
16 Volts
20 Volts Surge
Standard Voltage Ratings - VB/Radial Lead
Rated
Voltage
(WVDC)
Capacitance
(µF)
Catalog
Part Number
Nominal
Case Size*
D@L (mm)
Rated
Ripple Current
(mA rms) at
~
45&C,100kHz
Maximum ESR
(mΩ)at
~
20&C
100k-300kHz
Maximum
Leakage
Current (µA)
at~20&C
Loading...