Page 1
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
1/12 Version: A07
TO-220
ITO-220
TO-263
(D2PAK)
General Description
These voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of
applications including local, on-card regulation. These regulators employ internal current limiting, thermal shutdown,
and safe-area compensation. With adequate heatsink they can deliver output currents up to 1 ampere.
Although designed primarily as a fixed voltage regulator, these devices can be used with external components to
obtain adjustable voltages and currents.
This series is offered in 3-pin TO-220, ITO-220 & TO-263 package.
Features
● Output Voltage Range 5 to 24V
● Output current up to 1A
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 4% tolerance
Ordering Information
Part No.
Package
Packing
TS78xxCZ C0
TO-220
50pcs / Tube
TS78xxCI C0
ITO-220
50pcs / Tube
TS78xxCM RN
TO-263
800pcs / 13” Reel
Note: Where xx denote voltage option
Standard Application Circuit
Absolute Maximum Rating (Ta = 25
o
C unless otherwise noted)
Parameter
Symbol
Limit
Unit
Input Voltage
VIN*
35
V
Input Voltage
VIN**
40
V
Power Dissipation
PD
Internal Limited
W
Operating Junction Temperature
TJ
0~+125
o
C
Storage Temperature Range
T
STG
-65~+150
o
C
Note: * TS7805 to TS7818
** TS7824
*** Follow the derating curve
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point on
the Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
transient response.
Pin Definition:
1. Input
2. Ground (tab)
3. Output
Page 2
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
2/12 Version: A07
TS7805 Electrical Characteristics
(Vin=10V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
4.80
5
5.20
Output voltage
Vout
7.5V≤Vin≤20V,
10mA≤Iout≤1A, PD≤15W
4.75
5
5.25
V
7.5V≤Vin≤25V
-- 3 100
Line Regulation
REGline
Tj=25
o
C
8V≤Vin≤12V
-- 1 50
10mA≤Iout≤1A
--
15
100
Load Regulation
REGload
Tj=25
o
C
250mA≤Iout≤750mA
-- 5 50
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.2
8
7.5V≤Vin≤25V
--
--
1.3
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
40
--
µV
Ripple Rejection Ratio
RR
f=120Hz, 8V≤Vin≤18V
62
78
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
17
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
750
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-0.6
--
mV/ oC
TS7806 Electrical Characteristics
(Vin=11V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
5.75
6
6.25
Output Voltage
Vout
8.5V≤Vin≤21V,
10mA≤Iout≤1A, PD≤15W
5.7 6 6.3
V
8.5V≤Vin≤25V
-- 5 120
Line Regulation
REGline
Tj=25
o
C
9V≤Vin≤13V
--
1.5
60
10mA≤Iout≤1A
--
14
120
Load Regulation
REGload
Tj=25
o
C
250mA≤Iout≤750mA
-- 4 60
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.3
8
8.5V≤Vin≤25V
--
--
1.3
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
45
--
uV
Ripple Rejection Ratio
RR
f=120Hz, 9V≤Vin≤19V
59
75
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
19
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
550
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-0.7
--
mV/ oC
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Page 3
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
3/12 Version: A07
TS7808 Electrical Characteristics
Vin=14V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
7.69
8
8.32
Output voltage
Vout
10.5V≤Vin≤23V,
10mA≤Iout≤1A, PD≤15W
7.61
8
8.40
V
10.5V≤Vin≤25V
-- 6 160
Line Regulation
REGline
Tj=25oC
11V≤Vin≤17V
-- 2 80
10mA≤Iout≤1A
--
12
160
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 80
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.3
8
10.5V≤Vin≤25V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
52
--
µV
Ripple Rejection Ratio
RR
f=120Hz, 11V≤Vin≤21V
56
72
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
16
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
450
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-0.8
--
mV/ oC
TS7809 Electrical Characteristics
(Vin=15V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
8.65
9
9.36
Output Voltage
Vout
11.5V≤Vin≤23V,
10mA≤Iout≤1A, PD≤15W
8.57
9
9.45
V
11.5V≤Vin≤26V
-- 6 180
Line Regulation
REGline
Tj=25oC
12V≤Vin≤17V
-- 2 90
10mA≤Iout≤1A
--
12
180
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 90
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.3
8
11.5V≤Vin≤26V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
52
--
uV
Ripple Rejection Ratio
RR
f=120Hz, 12V≤Vin≤22V
55
72
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
16
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
450
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1
--
mV/ oC
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Page 4
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
4/12 Version: A07
TS7810 Electrical Characteristics
Vin=16V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
9.6
10
10.4
Output voltage
Vout
12.5V≤Vin≤25V,
10mA≤Iout≤1A, PD≤15W
9.5
10
10.5
V
12.5V≤Vin≤28V
-- 7 200
Line Regulation
REGline
Tj=25oC
13V≤Vin≤17V
-- 2 100
10mA≤Iout≤1A
--
12
200
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 100
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.3
8
12.5V≤Vin≤28V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
70
--
µV
Ripple Rejection Ratio
RR
f=120Hz, 13V≤Vin≤23V
55
71
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
18
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
400
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1
--
mV/ oC
TS7812 Electrical Characteristics
(Vin=19V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
11.53
12
12.48
Output Voltage
Vout
14.5V≤Vin≤27V,
10mA≤Iout≤1A, PD ≤15W
11.42
12
12.60
V
14.5V≤Vin≤30V
--
10
240
Line Regulation
REGline
Tj=25oC
15V≤Vin≤19V
-- 3 120
10mA≤Iout≤1A
--
12
240
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 120
mV
Quiescent Current
Iq
Tj=25oC, Iout=0
--
4.3
8
14.5V≤Vin≤30V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
75
--
uV
Ripple Rejection Ratio
RR
f=120Hz, 15V≤Vin≤25V
55
71
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
18
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
350
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1
--
mV/ oC
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Page 5
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
5/12 Version: A07
TS7815 Electrical Characteristics
Vin=23V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
14.42
15
15.60
Output voltage
Vout
17.5V≤Vin≤30V,
10mA≤Iout≤1A, PD ≤15W
14.28
15
15.75
V
17.5V≤Vin≤30V
--
12
300
Line Regulation
REGline
Tj=25oC
18V≤Vin≤22V
-- 3 150
10mA≤Iout≤1A
--
12
300
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 150
mV
Quiescent Current
Iq
Tj=25oC, Iout=0
--
4.3
8
17.5V≤Vin≤30V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
90
--
µV
Ripple Rejection Ratio
RR
f=120Hz, 18V≤Vin≤28V
54
70
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
19
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
230
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1
--
mV/ oC
TS7818 Electrical Characteristics
(Vin=24V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
17.30
18
18.72
Output Voltage
Vout
21V≤Vin≤33V, 10mA≤Iout≤1A,
PD ≤15W
17.14
18
18.90
V
21V≤Vin≤33V
--
15
360
Line Regulation
REGline
Tj=25oC
22V≤Vin≤26V
-- 5 180
10mA≤Iout≤1A
--
12
360
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 180
mV
Quiescent Current
Iq
Tj=25oC, Iout=0
--
4.5
8
21V≤Vin≤33V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
110
--
uV
Ripple Rejection Ratio
RR
f=120Hz, 21V≤Vin≤31V
54
70
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
22
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
200
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1
--
mV/ oC
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Page 6
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
6/12 Version: A07
TS7824 Electrical Characteristics
Vin=33V, Iout=500mA, 0oC≤Tj≤125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Tj=25oC
23.07
24
24.96
Output voltage
Vout
27V≤Vin≤38V, 10mA≤Iout≤1A,
PD ≤15W
22.85
24
25.20
V
27V≤Vin≤38V
--
18
480
Line Regulation
REGline
Tj=25oC
28V≤Vin≤32V
-- 6 240
10mA≤Iout≤1A
--
12
480
Load Regulation
REGload
Tj=25oC
250mA≤Iout≤750mA
-- 4 240
mV
Quiescent Current
Iq
Iout=0, Tj=25oC
--
4.6
8
27V≤Vin≤38V
--
--
1
Quiescent Current Change
ΔIq
10mA≤Iout≤1A
--
--
0.5
mA
Output Noise Voltage
Vn
10Hz≤f≤100KHz, Tj=25oC
--
170
--
µV
Ripple Rejection Ratio
RR
f=120Hz, 27V≤Vin≤37V
54
70
--
dB
Voltage Drop
Vdrop
Iout=1.0A, Tj=25oC
-- 2 --
V
Output Resistance
Rout
f=1KHz
--
28
--
mΩ
Output Short Circuit Current
Ios
Tj=25oC
--
150
--
mA
Peak Output Current
Io peak
Tj=25oC
--
2.2
--
A
Temperature Coefficient of
Output Voltage
ΔVout/ ΔTj
Iout=10mA, 0oC≤Tj≤125oC
--
-1.5
--
mV/ oC
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Page 7
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
7/12 Version: A07
Electrical Characteristics Curve
Figure 1. Peak Output Current as a Function of
Input-Output Differential Voltage
Figure 2. Ripple Rejection as a Function of Output
Voltage
Figure 3. Ripple Rejection as a Function of
Frequency
Figure 4. Output Voltage as a Function of Junction
Temperature
Figure 5. Output Impedance as a Function of
Output Voltage
Figure 6. Quiescent Current as a Function of
Temperature
Page 8
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
8/12 Version: A07
Application Information
Figure 7. D2PAK Thermal Resistance and Maximum Power
Dissipation vs. P.C.B Copper Length
Page 9
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
9/12 Version: A07
TO-220 Mechanical Drawing
Marking Diagram
XX
= Output Voltage
(05=5V, 06=6V, 08=8V, 09=9V, 10=10V, 12=12V, 15=15V, 18=18V, 24=24V)
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
CZ
= Package Code for TO-220
TO-220 DIMENSION
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
10.000
10.500
0.394
0.413
B
3.740
3.910
0.147
0.154
C
2.440
2.940
0.096
0.116
D - 6.350
-
0.250
E
0.381
1.106
0.015
0.040
F
2.345
2.715
0.092
0.058
G
4.690
5.430
0.092
0.107
H
12.700
14.732
0.500
0.581
I
8.382
9.017
0.330
0.355
J
14.224
16.510
0.560
0.650
K
3.556
4.826
0.140
0.190
L
0.508
1.397
0.020
0.055
M
27.700
29.620
1.060
1.230
N
2.032
2.921
0.080
0.115
O
0.255
0.610
0.010
0.024
P
5.842
6.858
0.230
0.270
Page 10
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
10/12 Version: A07
ITO-220 Mechanical Drawing
Marking Diagram
XX
= Output Voltage
(05=5V, 06=6V, 08=8V, 09=9V, 10=10V, 12=12V, 15=15V, 18=18V, 24=24V)
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
CI
= Package Code for ITO-220
ITO-220 DIMENSION
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
9.96
10.36
0.392
0.407
B
6.20 (typ.)
0.244 (typ.)
C
2.20 (typ.)
0.087 (typ.)
D
∮1.40 (typ.)
∮0.055 (typ.)
E
15.07
16.07
0.593
0.632
F
0.80 (typ.)
0.031 (typ.)
G
2.44
2.64
0.096
0.104
H
13.08
13.48
0.514
0.530
I
1.47 (max.)
0.057 (max.)
J
3.20
3.40
0.125
0.133
K
4.60
4.80
0.181
0.188
L
1.15 (typ.)
0.045 (typ.)
M
2.44
2.64
0.096
0.104
N
2.60
2.80
0.102
0.110
O
6.55
6.65
0.258
0.262
Page 11
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
11/12 Version: A07
TO-263 Mechanical Drawing
Marking Diagram
XX
= Output Voltage
(05=5V, 06=6V, 08=8V, 09=9V, 10=10V, 12=12V, 15=15V, 18=18V, 24=24V)
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
CM
= Package Code for TO-263
TO-263 DIMENSION
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
10.000
10.500
0.394
0.413
B
14.605
15.875
0.575
0.625
C
0.508
0.991
0.020
0.039
D
2.420
2.660
0.095
0.105
E
4.064
4.830
0.160
0.190
F
1.118
1.400
0.045
0.055
G
0.450
0.730
0.018
0.029
H
8.280
8.800
0.325
0.346
I
1.140
1.400
0.044
0.055
J
1.480
1.520
0.058
0.060
Page 12
TS7800 Series
3-Terminal Fixed Positive Voltage Regulator
12/12 Version: A07
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to any
intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for
such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale
and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability,
or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for
any damages resulting from such improper use or sale.
Loading...