Datasheet TP0610T Datasheet (Supertex)

Page 1
P-Channel Enhancement-Mode Vertical DMOS FETs
Ordering Information
BV
/R
DSS
BV
DGS
-60V 10 -50mA TP0610T
*Same as SOT-23. All units shipped on 3,000 piece carrier tape reels.
DS(ON)
(max) (min) TO-236AB*
I
D(ON)
Order Number/Package
TP0610T
Product marking for SOT-23:
T50
where = 2-week alpha date code
Features
Free from secondary breakdown
Low power drive requirement
Ease of paralleling
Low C
Excellent thermal stability
Integral Source-Drain diode
High input impedance and high gain
Complementary N- and P-channel devices
and fast switching speeds
ISS
Applications
Logic level interfaces – ideal for TTL and CMOS
Solid state relays
Battery operated systems
Photo voltaic drives
Analog switches
General purpose line drivers
Telecom switches
Advanced DMOS Technology
Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired.
Package Option
Drain
Absolute Maximum Ratings
Drain-to-Source Voltage BV Drain-to-Gate Voltage BV Gate-to-Source Voltage ± 20V Operating and Storage Temperature -55°C to +150°C Soldering Temperature* 300°C
* Distance of 1.6 mm from case for 10 seconds.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
DSS
DGS
Note: See Package Outline section for dimensions.
1
Gate Source
TO-236AB
(SOT-23)
top view
Page 2
TP0610T
Thermal Characteristics
Package I
SOT-23 -120mA -400mA 0.36W 200 350 -120mA -400mA
*
ID (continuous) is limited by max rated Tj.
(continuous)* ID (pulsed) Power Dissipation
D
@ TA = 25°C °C/W °C/W
θ
jc
θ
ja
IDR*I
DRM
Electrical Characteristics (@ 25°C unless otherwise specified)
Symbol Parameter Min Typ Max Unit Conditions
BV
DSS
V
GS(th)
V
GS(th)
I
GSS
I
DSS
I
D(ON)
R
DS(ON)
R
DS(ON)
G
FS
C
ISS
C
OSS
C
RSS
t
d(ON)
t
r
t
d(OFF)
t
f
V
SD
t
rr
Notes:
1. All D.C. parameters 100% tested at 25°C unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)
2. All A.C. parameters sample tested.
Drain-to-Source Breakdown Voltage -60 V VGS = 0V, ID = -10µA Gate Threshold Voltage -1.0 -2.4 V VGS = VDS, ID = -1.0mA Change in V
with Temperature 6.5 mV/°CV
GS(th)
GS
= V
DS, ID
= -1.0mA Gate Body Leakage ±10 nA VGS = ±20V, VDS = 0V Zero Gate Voltage Drain Current -1 µAV
-200 µAV
= 0V, VDS = Max Rating
GS
= 0V, VDS = 0.8 Max Rating
GS
= 125°C
T
A
ON-State Drain Current -50 mA VGS = -4.5V, VDS = -10V Static Drain-to-Source
ON-State Resistance
Change in R
with Temperature 1.0 %/°CV
DS(ON)
Forward Transconductance 60 m VDS = -10V, ID = -0.1A
25 VGS = -4.5V, ID = -25mA 10 V
= -10V, ID = -0.2A
GS
= -10V, ID = -0.2A
GS
Input Capacitance 60 Common Source Output Capacitance 30 pF
VGS = 0V, VDS = -25V f = 1 MHz
Reverse Transfer Capacitance 10 Turn-ON Delay Time 10
= -25V
V
Rise Time 15 Turn-OFF Delay Time 15
ns ID = -0.18A
DD
= 25
R
GEN
Fall Time 20 Diode Forward Voltage Drop -2.0 V VGS = 0V, ISD = -0.12A Reverse Recovery Time 400 ns VGS = 0V, ISD = -0.4A
Switching Waveforms and Test Circuit
INPUT
OUTPUT
0V
-10V
0V
V
DD
10%
t
d(ON)
t
(ON)
t
r
10%
90%
90%
t
d(OFF)
t
(OFF)
90%
10%
t
F
2
PULSE
GENERATOR
R
gen
INPUT
D.U.T.
OUTPUT
R
L
V
DD
Page 3
Typical Performance Curves
TP0610T
Output Characteristics
-2.0
-1.6
-1.2
(amperes)
-0.8
D
I
-0.4
0
0 -10 -20 -30 -50-40
VDS (volts) VDS (volts)
Transconductance vs. Drain Current
0.5
0.4
VGS = -10V
-8V
-6V
-4V
-3V
Saturation Characteristics
-2.0
-1.6
-1.2
(amperes)
-0.8
D
I
-0.4
0
0-2-4-6 -10-8
Power Dissipation vs. Temperature
0.5
0.4 SOT-23
V
GS
= -10V
-8V
-6V
-4V
-3V
0.3
(siemens)
0.2
FS
G
0.1
0
0 -0.2 -0.4 -0.6 -1.0-0.8
TA = -55°C
ID (amperes) TA (°C)
Maximum Rated Safe Operating Area
-1.0
SOT-23 (pulsed)
SOT-23 (DC)
-0.1
(amperes)
D
I
-0.01
TA = 25°C
25°C
125°C
0.3
(watts)
D
0.2
P
0.1
1.0
0.8
0.6
0.4
0
0 15010050
Thermal Response Characteristics
1257525
-0.001
-0.1 -100-10-1.0
VDS (volts)
0.2
Thermal Resistance (normalized)
0
0.001 100.01 0.1 1.0
3
t
(seconds)
p
SOT-23 T
= 25°C
A
PD = 0.36W
Page 4
Typical Performance Curves
Variation with Temperature
BV
DSS
1.1
1.0
(normalized)
DSS
BV
20
16
12
(ohms)
DS(ON)
R
On-Resistance vs. Drain Current
V
= -4.5V
GS
V
8
4
GS
= -10V
TP0610T
0.9
-50 0 50 100 150
Tj (°C) ID (amperes)
Transfer Characteristics
-2.0
V
= -25V
-1.6
-1.2
(amperes)
-0.8
D
I
-0.4
0
DS
= -55°C
T
A
25°C
125°C
0-2-4-6-8-10
(volts)
V
GS
Capacitance vs. Drain-to-Source Voltage
100
f = 1MHz
75
0
0 -0.4 -0.8 -1.2 -2.0-1.6
V
and R
GS(th)
1.2
1.1
1.0
V
@ -1mA
GS(th)
(normalized)
0.9
GS(th)
V
0.8
0.7
-50 0 50 100 150
Variation with Temperature
DS(ON)
R
DS(ON)
@ -10V, -0.5A
Tj (°C)
Gate Drive Dynamic Characteristics
-10
V
= -10V
-8
DS
1.6
1.4
1.2
1.0
0.8
(normalized)
DS(ON)
R
50
C
C (picofarads)
25
C
RSS
0
0 -10 -20 -30 -40
V
DS
©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited.
(volts)
C
OSS
ISS
-6
(volts)
GS
GS
-4
V
V
= -40V
DS
125 pF
-2
35 pF
0
0 0.5 1.0
Q
(nanocoulombs)
G
1.5
2.0 2.5
11/12/01
1235 Bordeaux Drive, Sunnyvale, CA 94089
TEL: (408) 744-0100 • FAX: (408) 222-4895
4
www.supertex.com
Loading...