Page 1
Aluminum Electrolytic Capacitors TN
CE02 Type
Features
• 85℃
•
SPECIFICATIONS
Items Performance
Operating Temperature Range
Capacitance Tolerance
Leakage Current (at 20℃)
, 1000 hours assured, standard non-polarized series
Suitable for use in circuits which have a reversed or unknown
polarity
I = 0.03CV or 3 (μA) whichever is greater (after 2 minutes)
Where, C= rated capacitance in μF. V = rated DC working voltage in V.
-40℃ ~ +85℃
±
20% (at 120Hz, 20℃)
Dissipation Factor
(Tanδat 120Hz, 20℃)
Low Temperature
Characteristics (at 120Hz)
Rated Voltage 6.3 10 16 25 35 50 63 100
Tanδ(max) 0.25 0.22 0.18 0.16 0.14 0.12 0.10 0.09
When the capacitance exceeds 1000μF, 0.02shall be added every 1000μF increase.
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100
Impedance
Ratio
Z(-25℃)/Z(+20℃) 4 3 3 2 2 2 2 2
Z(-40℃)/Z(+20℃) 8 6 6 4 4 3 3 3
Load Life Test
(After application of the rated
voltage at 85℃, the polarity
inverted every 250hrs.)
Shelf Life Test
* The above specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage
applied for 1000 hrs at 85℃.
Test time: 1000 hrs; other items are the same as those for the load life test.
Other Standards
DIAGRAM OF DIMENSIONS
DIMENSION & PERMISSIBLE RIPPLE CURRENT
μF Contents φD×L
V.DC
0R1 6.3 × 13 5 6.3 × 13 5 6.3 × 13 5
0.1
R22 6.3 × 13 7 6.3 × 13 8 6.3 × 13 8
0.22
R33 6.3 × 13 9 6.3 × 13 10 6.3 × 13 10
0.33
R47 6.3 × 13 10 6.3 × 13 12 6.3 × 13 12
0.47
010 6.3 × 13 16 6.3 × 13 18 6.3 × 13 18
1
2R2 6.3 × 13 23 6.3 × 13 27 6.3 × 13 27
2.2
3R3 6.3 × 13 29 6.3 × 13 31 6.3 × 13 35
3.3
4R7 6.3 × 13 34 6.3 × 13 40 6.3 × 13 42
4.7
100 6.3 × 13 46 6.3 × 13 54 8 × 13 59 8 × 16 69
10
220 6.3 × 13 61 6.3 × 13 69 6.3 × 13 74 8 × 13 89 8 × 16 97 10 × 21 120
22
330 6.3 × 13 71 6.3 × 13 80 8 × 13 85 8 × 16 101 10 × 16 109 10 × 17 139 10 × 21 153
33
470 6.3 × 13 85 8 × 13 95 8 × 13 113 8 × 16 120 10 × 17 152 10 × 21 174 13 × 22 203
47
101 6.3 × 13 118 8 × 13 147 8 × 16 155 10 × 17 192 10 × 21 205 10 × 21 232 13 × 22 269 16 × 27 317
100
221 8 × 16 195 8 × 16 254 10 × 17 268 10 × 21 298 13 × 22 338 13 × 27 381 16 × 27 447 16 × 37 501
220
331 8 × 16 239 10 × 17 312 10 × 21 344 13 × 22 387 13 × 27 433 16 × 27 500 16 × 33 567
330
471 10 × 17 333 10 × 21 389 13 × 22 436 13 × 27 483 16 × 27 552 16 × 33 618 18 × 42 792
470
102 13 × 21 508 13 × 22 603 13 × 27 664 16 × 27 781 16 × 37 857 18 × 42 1054
1000
222 13 × 27 836 16 × 28 1000 16 × 37 1121 18 × 42 1355
2200
6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) 100V (2A)
mA
φD×L
mA
φD×L
mA
Test Time 1000 Hrs
Capacitance Change Within ±20%of initial value
Dissipation Factor Less than 200% of specified value
Leakage Current Within specified value
JIS C 5101-4
LEAD DIAMETER
φD
6.3 8 10 13 16 18
φd
α
β
0.6 0.8
1.5 2.0
0.5 1.0
Dimension: φD × L(mm)
Ripple Current: mA/rms at 120 Hz, 85°C
φD×L
mA
φD×L
mA
φD×L
mA
φD×L
E.CAP.No1.2002/2003
mA
Unit: mm
φD×L
mA
59
Loading...