Page 1
TACOMPLEXITY
Single
TL34071P
TL34071AP
TL34071D
TL34071AD
40 C
g
55 C
g
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
D
Wide Gain-Bandwidth Product...4.5 MHz
D
High Slew Rate...13 V/µs
D
Fast Settling Time . . . 1.1 µs to 0.1%
D
Wide-Range Single-Supply Operation
4 V to 44 V
D
Wide Input Common-Mode Range Includes
Ground (V
D
Low Total Harmonic Distortion...0.02%
)
CC–
D OR P PACKAGE
(SINGLE, TOP VIEW)
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
D
Low Input Offset Voltage ...3 mV Max
(A Suffix)
D
Large Output Voltage Swing
–14.7 V to 14 V (With ±15-V Supplies)
D
Large Capacitance Drive Capability
10,000 pF
D
Excellent Phase Margin...60°
D
Excellent Gain Margin...12 dB
D
Output Short-Circuit Protection
D OR P PACKAGE
(DUAL, TOP VIEW)
OFSET N1
/GND
V
CC–
1OUT
1IN–
1IN+
V
2IN+
2IN–
2OUT
NC – No internal connection
1
IN–
2
IN+
3
4
DW PACKAGE
(QUAD, TOP VIEW)
CC+
NC
0°C
to
70°C
–40°C
to
105°C
–55°C
to
125°C
D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR).
8
7
6
5
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
V
CC–
1OUT
1IN–
1IN+
/GND
1OUT
1IN–
1IN+
V
CC+
2IN+
2IN–
2OUT
STANDARD
GRADE
TL34072D
1
2
3
4
N PACKAGE
(QUAD, TOP VIEW)
1
2
3
4
5
6
7
8
7
6
5
14
13
12
11
10
9
8
PRIME
GRADE
TL34072AD
NC
V
CC+
OUT
OFSET N2
4OUT
4IN–
4IN+
/GND
V
CC–
3IN+
3IN–
3OUT
9
NC
AVAILABLE OPTIONS
PACKAGE
PLASTIC DIP SMALL OUTLINE
STANDARD
GRADE
Single TL34071P TL34071AP TL34071D TL34071AD
Dual
Quad TL34074N TL34074AN TL34074DW TL34074ADW
Single TL33071P TL33071AP TL33071D TL33071AD
Dual
Quad TL33074N TL33074AN TL33074DW TL33074ADW
Single TL35071P TL35071AP TL35071D TL35071AD
Dual
Quad TL35074N TL35074AN TL35074DW TL35074ADW
TL34072P
TL33072P TL33072AP TL33072D TL33072AD
TL35072P TL35072AP TL35072D TL35072AD
PRIME
GRADE
TL34072AP
V
CC+
2OUT
2IN–
2IN+
4OUT
4IN–
4IN+
V
CC–
3IN+
3IN–
3OUT
/GND
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1996, Texas Instruments Incorporated
1
Page 2
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
description
Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4,
TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers
offers 4.5 MHz of gain bandwidth product, 13 V/µs slew rate, and fast settling time without the use of JFET device
technology. Although this series can be operated from split supplies, it is particularly suited for single-supply
operation since the common-mode input voltage range includes ground potential (V
transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The
all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing,
provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency
output impedance, and symmetrical source/sink ac frequency response.
The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified
over the commercial (0°C to 70°C) temperature range. The TL33071/2/4 devices are available in standard or
prime performance (A-suffix) grades and are specified over industrial/vehicular (–40°C to 105°C) temperature
range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are
specified over the military (– 55°C to 125°C) temperature range. These low-cost amplifiers are available in
single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and
MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages.
symbol
). With a Darlington
CC–
OFFSET N1
IN+
IN–
OFFSET N2
Single
Dual and Quad
(per amplifier)
+
–
OUT
IN+
IN–
+
–
OUT
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 3
PACKAGE
A
UNIT
Common-mode input voltage, V
V
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Supply voltage, V
Differential input voltage, V
Input voltage, V
Input current, I
(each input) ±1 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
Output current, I
Total current into V
Total current out of V
Duration of short-circuit current at (or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, T
Storage temperature range, T
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds: D, DW, N, or P package 260°C. . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below
V
–0.3 V.
CC–
3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
D 725 mW 5.8 mW/°C 464 mW 261 mW 145 mW
DW 1025 mW 8.2 mW/°C 656 mW 369 mW 205 mW
N 1150 mW 9.2 mW/°C 736 mW 414 mW 230 mW
P 1000 mW 8.0 mW/°C 640 mW 360 mW 200 mW
(see Note 1) 22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC+
–22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC–
(any input) V
I
±80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
CC+
CC–
(see Note 2) ±44 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ID
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
: TL3307x –40°C to 105°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
TL3407x 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL3507x –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
and V
CC+
DISSIPATION RATING TABLE
TA ≤ 25°C DERATING FACTOR TA = 70°C TA = 105°C TA = 125°C
POWER RATING ABOVE TA = 25°CAPOWER RATINGAPOWER RATINGAPOWER RATING
CC–
.
CC±
†
recommended operating conditions
Supply voltage, V
Operating free-air temperature, T
CC±
p
TL3307x TL3407x TL3507x
MIN MAX MIN MAX MIN MAX
±2 ±22 ±2 ±22 ±2 ±22 V
VCC = 5 V 0 2.7 0 2.9 0 2.7
IC
V
= ±15 V –15 12.7 –15 12.9 –15 12.7
CC±
A
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
–40 105 0 70 –55 125 °C
3
Page 4
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
PARAMETER
TEST CONDITIONS
T
†
V
±15 V
V
IIOInput offset current
R
S
Ω
V
±15 V
nA
V
V
IIBInput bias current
A
V
±15 V
V
R
Ω
V
A
gg
V
±10 V,R
kΩ
V/mV
IOSShort-circuit output current
25°C
mA
CMRR
IC ICR
,
25°C80977097
dB
k
ygj
CC±
25°C80977097
dB
V
No Load
I
y
mA
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
electrical characteristics at specified free-air temperature, V
A
VCC = 5 V 25°C 0.5 3 1.5 5
V
αV
V
V
†
‡
Input offset voltage
IO
Temperature coefficient
IO
of input offset voltage
p
p
Common-mode input
ICR
voltage range
High-level output voltage
OH
Low-level output voltage
OL
Large-signal differential
VD
voltage amplification
p
Common-mode V
rejection ratio
Supply-voltage rejection V
SVR
ratio (∆V
Supply current
CC
(per channel)
Full range is 0°C to 70°C for the TL3407x devices, and –40°C to 105°C for the TL3307x devices, and –55°C to 125°C for the TL3507x devices.
All typical values are at TA = 25°C.
CC±
/∆VIO)
VIC = 0,
= 0,
O
=
= 50
= 50
S
V
= 5 V, V
CC+
RL = 2 kΩ
RL = 10 kΩ
RL = 2 kΩ Full range 13.4 13.4
V
= 5 V, V
CC+
RL = 2 kΩ
RL = 10 kΩ
RL = 2 kΩ Full range –13.5 –13.5
=
O
Source: VID = 1 V, VO = 0
Sink: VID = –1 V , VO = 0
= V
RS = 50 Ω
= ±13.5 V
CC±
to ±16.5 V , RS = 100 Ω
= 0,
O
V
= 5 V, V
CC+
VO = 0, No Load Full range 4.6 4.6
=
CC
VCC = ±15 V Full range 10 10 µV/°C
=
CC
= 5
CC
=
CC
= 0,
CC–
= 0,
CC–
= 2
L
min,
= 0,
CC–
25°C 0.5 3 1.0 5
Full range 5 7
25°C 7 100 7 100
Full range 250 250
25°C –0.8 –2 –0.8 –2
Full range –2.3 –2.3
25°C –0.7 –1.5 –0.7 –1.5
Full range –1.8 –1.8
25°C
Full range
25°C 3.7 4 3.7 4
25°C 13.6 14 13.6 14
25°C 0.1 0.3 0.1 0.3
25°C –14.7 –14.3 –14.7 –14.3
25°C 50 100 25 100
Full range 25 20
°
°
°
25°C 3.5 4.5 3.5 4.5
Full range 4.7 4.7
25°C 3.4 4.4 3.4 4.4
MIN TYP‡MAX MIN TYP‡MAX UNIT
–15
to
13.2
–15
to
12.8
–10 –30 –10 –30
= ±15 V (unless otherwise noted)
CC±
TL3x07xA TL3x07x
–15
to
13.2
–15
to
12.8
20 30 20 30
mV
µ
V
V
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 5
PARAMETER
TEST CONDITIONS
UNIT
I
,
V/µs
tsSettling time
A
1, 10-V step
s
THD
Total harmonic distortion
0.02
0.02
%
BW
Power bandwidth
L
,
O(PP)
,
200
200
kH
φmPhase margin
Gain margin
dB
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
operating characteristics, V
SR+ Positive slew rate
SR– Negative slew rate
V
I
n
GBW Gain-bandwidth product f =100 kHz 3.5 4.5 3.5 4.5 MHz
r
i
C
z
Equivalent input noise voltage f = 1 kHz, RS = 100 Ω 32 32 nV/√Hz
n
Equivalent input noise current f = 1 kHz 0.22 0.22 pA/√Hz
Differential input resistance VIC = 0 150 150 MΩ
Input capacitance VIC = 0 2.5 2.5 pF
i
Channel separation f = 10 kHZ 120 120 dB
Open-loop output impedance f = 1 MHZ 30 30 Ω
o
= ±15 V, TA = 25°C
CC±
TL3x07xA TL3x07x
MIN TYP MAX MIN TYP MAX
V
= –10 V to 10 V,
RL = 2 kΩ
= –
VD
VO = 2 V to 20 V, RL = 2 kΩ,
AVD = 10, f = 10 kHz
R
= 2 kΩ, V
AVD = 1,
RL = 2 kΩ, CL = 0
RL = 2 kΩ, CL = 300 pF
RL = 2 kΩ, CL = 0 12 12
RL = 2 kΩ, CL = 300 pF 4 4
AV = 1 8 10 8 10
AV = –1 13 13
To 0.1% 1.1 1.1
p
To 0.01% 2.2 2.2
= 20 V,
THD = 5.0%
60° 60°
40° 40°
µ
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
Page 6
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. T esting and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated
Loading...