Datasheet TEP100 Datasheet (Powersolve)

High Density DC-DC Modules

TEP100 Series, 100 Watt

www.powersolve.co.uk

Features

• High power density

• Wide 2:1 input voltage range

• Very high efficiency up to 93%

• Soft start, Reverse Input Protection

• Adjustable Output Voltage

• Shielded metal case with aluminium baseplate

• Optional adapter for screw terminal connections

Electrical Specification

Output Voltage Adjustment +10% / -20% by external resistor
Conducted EMI EN 55022 class A, FCC level A (with filter)
Over Current Protection 110-140% of Iout max.
Over Voltage Protection 115-130% of Vout nom.
Short Circuit Protection Continuous, automatic recovery
Reverse input protection Parallel diode
Operating Temperature Range -40°C to +75°C with heatsink (derating applies)
Temperature Coefficient ±0.02%/K
Thermal protection shutdown at 115°C
I/O Isolation test voltage 2250VDC (basic insulation)
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Casing shielded metal case with aluminium baseplate
Remote On/Off shutdown input for low input current (3mA) in standby operation

(models pictured with chassis mount adapter and optional heatsink)

Output Voltage and Current Ratings

MODEL INPUT OUTPUT OUTPUT  RIPPLE & LINE REG. LOAD REG. EFF.

TEP 100-1210 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1211 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1212 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1213 9 - 18V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1215 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1216 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1218 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 90%
TEP 100-2410 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-2411 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2412 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2413 18 - 36V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2415 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-2416 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-2418 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4810 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-4811 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4812 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4813 36 - 75V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4815 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4816 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4818 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 92%

Options
Heatsink: order code TSP-HS1 (separate order)
Chassis mount adapter: add suffix -CM*
Chassis mount adapter with EMI filter: add suffix -CMF*
*shipped assembled with converter module

VOLTAGE VOLTAGE CURRENT NOISE

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]

High Density DC-DC Modules

www.powersolve.co.uk

Mechanical and Connection Details

TEP100 Module

Pin Diameters
Pin 5 & 9: 0.08 (2.0)
Other pins: 0.04 (1.0)

Order Code: TEP-HS1 (shown with heatsink mounted)

Pin Function

1 -Vin (GND)
2 Case
3 Remote On/Off
4 +Vin (Vcc)
5 -Vout
6 -Sense *
7 Trim
8 +Sense *
9 +Vout

* Sense pins must be connected
at either the load or module

Suffix -CM: Chassis Mount Adaptor

Suffix -CMF: Chassis Mount Adaptor with EMI Filter

Dimensions in Inches (mm)
Tolerances: ±0.02 (±0.5)
Pin Pitch Tolerances: ±0.01 (±0.25)
Mounting Hole Pitch Tolerances: ±0.01 (±0.25)

NOTE:
Heatsinks supplied as separate items
Adaptors are supplied factory fitted to module and can not be
supplied as a separate item

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]