Page 1
Features
Wide 2 : 1 Input Range
Highest Power Density in a DIP 24
High Efficiency up to 85%
Indefinite Short-circuit Protection
I/O-Isolation 1’500 VDC
Input Filter meets EN 55022, Class A
and FCC, Level A without external
Components
Remote on/off
Shielded Metal Case with insulated
Baseplate
24-pin DIP with Industr y Standard
Pinout
DC/DC Converter
TEN 8 Series 8 Watt
2 Year Product Warranty
The TEN 8 series DC/DC converter has been designed for a wide
range of space critical applications including tele- and data communication systems and industrial process control systems. The shutdown
input feature makes these converters also ideal for mobile battery powered equipment. High efficiency allows operation up to 71°C without
derating. Input filtering to EN 55022, class A and low output ripple
minimize design-in time and cost.
Models
Ordercode Input voltage range Output voltage Ou tput curre nt max. Efficiency typ.
TEN 8-1210 3.3VDC 2’000 mA 80 %
TEN 8-1211 5 VDC 1’500 mA 82 %
TEN 8-1212 12 VDC 665 mA 85 %
TEN 8-1213 9 – 18 VDC 15 VDC 535 mA 83 %
TEN 8-1221 ± 5 VDC ± 800 mA 83 %
TEN 8-1222 ± 12 VDC ± 335 mA 84 %
TEN 8-1223 ± 15 VDC ± 265 mA 84 %
TEN 8-2410 3.3VDC 2’000 mA 80 %
TEN 8-2411 5 VDC 1’500 mA 83 %
TEN 8-2412 12 VDC 665 mA 85 %
TEN 8-2413 18 – 36 VDC 15 VDC 535 mA 84 %
TEN 8-2421 ± 5 VDC ± 800 mA 82 %
TEN 8-2422 ± 12 VDC ± 335 mA 83 %
TEN 8-2423 ± 15 VDC ± 265 mA 85 %
TEN 8-4810 3.3VDC 2’000 mA 80 %
TEN 8-4811 5 VDC 1’500 mA 83 %
TEN 8-4812 12 VDC 665 mA 84 %
TEN 8-4813 36 – 75 VDC 15 VDC 535 mA 84 %
TEN 8-4821 ± 5 VDC ± 800 mA 82 %
TEN 8-4822 ± 12 VDC ± 335 mA 85 %
TEN 8-4823 ± 15 VDC ± 265 mA 85 %
www.tracopower.com Page 1
Page 2
DC/DC Conver ter
TEN 8 Series 8 Watt
Input Specifications
Input current (no load) 12 Vin models: 20 mA typ.
24 Vin models: 15 mA typ.
48 Vin models: 10 mA typ.
Input current (full load) 12 V in ; 3.3 Vout models: 700 mA typ.
12 Vin; other output models: 820 mA typ.
24 Vin; 3.3 V out models: 350 mA typ.
24 Vin; other output models: 400 mA typ.
48 Vin; 3.3 V out models: 170 mA typ.
48 Vin; other output models: 200 mA typ.
Surge voltage (100 msec. max.) 12 Vin models: 36 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
V oltage set accuracy ± 2 %
Regulation – Input variation Vin min. to Vin max. ± 0.2 % max.
– Load variation 25 – 100 %
– single output models ± 0.2 % max.
– dual output models balanced load ± 1.0 % max.
– dual output models unbalanced load ± 3.0 % max.
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max
Temperature coefficient ± 0.02 % / °C
Current limitation > 110% of Iout max., foldback
Short circuit protection indefinite (automatic recovery)
Capacitive load 3.3 V out models: 3300 µF max.
5 V out models / ± 5 Vout models: 1600 µF max./ ± 1000 µF max.
12 V out models /±12 Vout models: 350 µF max./ ± 160 µF max.
15 V out models /±15 V out models: 240 µF max./± 100 µF max.
General Specifications
T emperature ranges – Operating – 25 °C ... + 71 °C (no derating)
– Case temperature + 100 °C max.
– Storage – 55 °C ... + 105 °C
Humidity (non condensing) 95 % rel H max.
Reliability , calculated MTBF (MIL-HDBK-217 E) >715’000 h @ + 25 °C
Isolation voltage – Input/Output 1’500 VDC
Isolation capacity – Input/Output 300 pF max.
Isolation resistance – Input/Output (500 VDC) > 1000 M Ohm
Switching frequency 300 kHz typ. (Pulse width modulation PWM)
Remote ON/OFF (optional): – ON: 3.5 ... 12 VDC or open circuit.
– OFF: 0 ... 1.2 VDC or short circuit pin 1 and pin 2/3
– OFF idle current: 2.5 mA
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com Page 2
Page 3
DC/DC Conver ter
TEN 8 Series 8 Watt
Physical Specifications
Case material Copper nickel plated
Baseplate plastic
Potting material Epoxy (flammability to UL 94V-0)
Weight 17 g (0.60 oz)
Soldering temperature max. 250 °C / 10 sec.
Outline Dimensions mm (inches)
±0.5
(0.08 ±0.02)
±0.02)
±0.5 (1.25
2.0
25.4 (1.0)
2 x 2.54 (0.1)
(0.6)
15.24
32
(0.2)
5.08
Insulated Baseplate
10
(0.4
±0.5
±0.02)
3.8
(0.15)
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (0.02)
2.4
±0.5
(0.09 ±0.02)
23
22
16
14
15.24
20
±0.5 (0.8 ±0.02)
1
2
3
Bottom view
9
11
(0.6)
Pin-Out
Pin Single Dual
1
Remote on/off Remote on/off
2 –Vin (GND) –Vin (GND)
3 –Vin (GND) –Vin (GND)
9 No function Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Specifications can be changed without notice
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com
Rev . 09/01
Page 3
Loading...