Page 1
Features
Wide 2:1 Input Range
Full SMD-Design
High Power Density
High Efficiency up to 86%
Regulated Outputs
I/O-isolation 1’500 VDC
Indefinite Short-Circuit Protection
Input Filter meets EN 55022, Class A
and FCC, Level A without external
Components
Shielded Metal Case with insulated
Baseplate
24-pin DIP with Industry Standard
Pinout
High Reliability , MTBF >1 Mio. h
2 Year Product Warranty
DC/DC Conver ter
TEN 5 Series 6 Watt
The TEN 5 Series is a range of DC/DC-converter modules with wide
input range of 2:1. State of the art SMD-technology guarantees a product
with very high reliability and good cost /performance ratio. High
efficiency allows an operating temperature range of -40°C to +75°C
without derating. I/O-isolation of 1’500 VDC together with conducted
noise compliance to EN 55022-A and FCC, level A makes these
converters ideal for a wide range of applications in communications,
mobile battery powered equipments and industrial systems.
Models
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 5-1210 3.3VDC 1200 mA 77 %
TEN 5-1211 5 VDC 1000 mA 81 %
TEN 5-1212 12 VDC 500 mA 84 %
TEN 5-1213 9 – 18 VDC 15 VDC 400 mA 84 %
TEN 5-1221 ± 5 VDC ± 500 mA 81 %
TEN 5-1222 ± 12 VDC ± 250 mA 84 %
TEN 5-1223 ± 15 VDC ± 200 mA 84 %
TEN 5-2410 3.3VDC 1200 mA 79 %
TEN 5-2411 5 VDC 1000 mA 83 %
TEN 5-2412 12 VDC 500 mA 86 %
TEN 5-2413 18 – 36 VDC 15 VDC 400 mA 86 %
TEN 5-2421 ± 5 VDC ± 500 mA 83 %
TEN 5-2422 ± 12 VDC ± 250 mA 86 %
TEN 5-2423 ± 15 VDC ± 200 mA 86 %
TEN 5-4810 3.3VDC 1200 mA 79 %
TEN 5-4811 5 VDC 1000 mA 83 %
TEN 5-4812 12 VDC 500 mA 86 %
TEN 5-4813 36 – 75 VDC 15 VDC 400 mA 86 %
TEN 5-4821 ± 5 VDC ± 500 mA 83 %
TEN 5-4822 ± 12 VDC ± 250 mA 86 %
TEN 5-4823 ± 15 VDC ± 200 mA 86 %
www.tracopower.com Page 1
Page 2
DC/DC Conver ter
TEN 5 Series 6 Watt
Input Specifications
Input current no load /full load 12 Vin models 20 mA / 590 mA typ.
24 Vin models 5 mA / 290 mA typ.
48 Vin models 3 mA / 145 mA typ.
Start-up voltage / 12 Vin models 8.5 VDC / 8 VDC
under voltage shut down 24 Vin models 16.5 VDC / 16 VDC
48 Vin models 32.5 VDC / 32 VDC
Surge voltage (1 sec. max.) 12 Vin models 25 V max.
24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
V oltage set accuracy ± 1 %
Regulation – Input variation Vin min. to Vin max. ± 0.3 % max.
– Load variation 10 – 100 %
– single output models ± 1 % max.
– dual output models balanced load ± 1 % max.
– dual output models unbalanced load ± 3 % max.
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Output current limitation >110 % of Iout max., constant current
Short circuit protection hiccup mode, indefinite (automatic recovery)
Capacitive load – single output models 6800 µF max.
– dual output models 1000 µF max.
General Specifications
T emperature ranges – Operating – 40 °C ... + 75 °C (no derating)
– Case temperature + 95 °C max.
– Storage – 40 °C ... + 125 °C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C
Isolation voltage Input/Output 1’500 VDC
Isolation capacity Input/Output 380 pF typ
Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm
Switching frequency 300 kHz typ. (Pulse frequency modulation PFM)
Safety standards UL 1950 , IEC 60950, EN 60950
Compliance up to 60 VDC input voltage
(SELV limit)
Safety approval UL /cUL File E188913
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com Page 2
Page 3
DC/DC Conver ter
TEN 5 Series 6 Watt
Physical Specifications
Case material Steel chrome-nickel plated
Baseplate Epoxy
Potting material Silicon rubber TSE (flammability to UL 94V-0)
Weight 14 g (0.55 oz)
Soldering temperature max. 260 °C / 10 sec.
Outline Dimensions mm (inches)
)
±0.5
±0.02
(0.1)
(0.18
4.54
2.54
)
±0.02
±0.5 (1.25
(0.9)
22.86
(0.6)
15.24
32
(0.2)
5.08
Insulated Baseplate
(0.2)
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (0.02)
0.5
(0.02)
10
(0.4
±0.5
±0.02
5
Pin-Out
23
22
16
14
2.4
±0.5
(0.1
±0.02
)
)
15.24
20
±0.5 (0.8
2
3
Bottom view
9
11
(0.6)
±0.02
)
Pin Single Dual
2 –Vin (GND) –Vin (GND)
3 –Vin (GND) –Vin (GND)
9 No pin Common
11 No function –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Specifications can be changed without notice
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com
Rev. 06/00
Page 3
Loading...