Page 1
Features
Wide 2 : 1 Input Range
Highest Power Density
Operating Temp. Range
– 25°C to +71°C
Indefinite Short-Circuit Protection
I/O-Isolation 1500 VDC
Input Filter meets EN 55022, Class A
and FCC, Level A without external
Components
Industry Standard Pinout
Shielded Metal Case with
insulated Baseplate
2 Year Product Warranty
DC/DC Conver ter
TEN 15 Series 15 Watt
pending
The TEN 15 series of DC/DC converters , comprising 21 different models,
has been designed for a wide range of applications including
communications, industrial systems and battery powered equipments. Full
SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to
meet EN 55022, class A and FCC, level A and a high efficiency.
Models
Ordercode Input voltage range Output voltage O utput curren t max. Efficiency typ.
TEN 15-1210 3,3 VDC 4’000 mA 79 %
TEN 15-1211 5 VDC 3‘000 mA 82 %
TEN 15-1212 12 VDC 1’250 mA 83 %
TEN 15-1213 9 – 18 VDC 15 VDC 1’000 mA 83 %
TEN 15-1221 ± 5 VDC ± 1‘500 m A 82 %
TEN 15-1222 ± 12 VDC ± 625 m A 85 %
TEN 15-1223 ± 15 VDC ± 500 m A 85 %
TEN 15-2410 3,3VDC 4’000 mA 80 %
TEN 15-2411 5 VDC 3‘000 mA 83 %
TEN 15-2412 12 VDC 1’250 mA 84 %
TEN 15-2413 18 – 36 VDC 15 VDC 1’000 mA 84 %
TEN 15-2421 ± 5 VDC ± 1‘500 m A 83 %
TEN 15-2422 ± 12 VDC ± 625 m A 86 %
TEN 15-2423 ± 15 VDC ± 500 m A 86 %
TEN 15-4810 3,3VDC 4’000 mA 80 %
TEN 15-4811 5 VDC 3‘000 mA 83 %
TEN 15-4812 12 VDC 1’250 mA 84 %
TEN 15-4813 36 – 75 VDC 15 VDC 1’000 mA 84 %
TEN 15-4821 ± 5 VDC ± 1‘500 m A 83 %
TEN 15-4822 ± 12 VDC ± 625 m A 86 %
TEN 15-4823 ± 15 VDC ± 500 m A 86 %
www.tracopower.com Page 1
Page 2
DC/DC Conver ter
TEN 15 Series 15 Watt
Input Specifications
Input current no load /full load 12 Vin models: 40 mA typ.
24 Vin models: 25 mA typ.
48 Vin models: 20 mA typ.
Input current (full load) 12 V in; 3.3 Vout models: 1580 mA typ.
12 Vin; other output models: 1500 mA typ.
24 Vin; 3.3 V out models: 780 mA typ.
24 Vin; other output models: 740 mA typ.
48 Vin; 3.3 V out models: 390 mA typ.
48 Vin; other output models: 370 mA typ.
Surge voltage 12 V in models: 36 V max.
(100 msec. max.) 24 Vin models: 50 V max..
48 Vin models: 100 V max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
V oltage set accuracy ± 1 %
Regulation – Input variation Vin min. to Vin max. ± 1 % max.
– Load variation 10 – 100 %
– single output models ± 0.5 % max.
– dual output models balanced load ± 1 % max.
– dual output models unbalanced load ± 3 % max.
Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max.
dual output models: 75 mVpk-pk max
Temperature coefficient ± 0.02 % / °C
Output current limitation > 110% of Iout max., foldback
Short circuit protection indefinite (automatic recovery)??
Capacitive load 3.3 V out models: 10’200 µF max.
5 V out models / ± 5 Vout models: 7’050 µF max. / ± 1’020 µF max.
12 V out models / ±12 Vout models: 1’035 µF max. / ± 495 µF max.
15 V out models / ±15 V out models: 750 µF max. / ± 165 µF max.
General Specifications
T emperature ranges – Operating – 25 °C ... + 71 °C
– Case temperature + 100 °C max.
– Storage – 55 °C ... + 125 °C
Derating 3.3 VDC output models: 2.5%/°C above 60°C
other output models: no derating
Humidity (non condensing) 95 % rel H max.
Reliability , calculated MTBF (MIL-HDBK-217 E) > 560’000 h @ + 25 °C
Isolation voltage – Input/Output 1‘500 VDC
Isolation capacity – Input/Output 680 pF typ
Isolation resistance – Input/Output (500 VDC) > 1’000 MOhm
Switching frequency (fixed) single output models: 500 kHz typ. (Pulse width modulation PWM)
dual output models: 300 kHz typ. (Pulse width modulation PWM)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com Page 2
Page 3
DC/DC Conver ter
TEN 15 Series 15 Watt
General Specifications
Safety standards UL 1950, EN 60950, IEC 60950 (Compliance
up to 60 VDC input voltage(SELV limit)
Savety approvals UL /cUL pending
Physical Specifications
Case material Copper nickel plated
Baseplate Non conductive plastic
Potting material Epoxy (flammability to UL 94V-0)
W eight 31g (1.09oz)
Soldering temperature max. 250 °C / 10 sec.
Outline Dimensions mm (inches)
50.8
±0.5
(2.0 ±0.02)
15.2
5.08
(0.2)
)
±0.5
±0.02
10.2
(0.4
(0.6
±0.5
±0.02)
20.32
(0.8)
Bottom View
1
2
3
4
5
10.16
10.16
±0.5
2.5
(0.4) (0.4)
)
±0.02
(0.098
(0.8)
20.32
±0.5
25.4
±0.5
)
±0.02
(1.0
)
±0.02
Pin-Out
Pin Single Dual
1 +Vin (Vcc) +Vin (Vcc)
2 –V in (GND) –Vin (GND)
3 +Vout +Vout
4 No pin Common
5 –Vout –Vout
10.2
(0.402
6.2
(0.24)
Insulated baseplate
Pin diameter ø 1.0 ±0.05 (0.039 ±0.002)
Specifications can be changed without notice
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com
Rev. 11/01
Page 3
Loading...