●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer,
Home appliance, OA/HA/Communication
●Corresponding product to RoHS
■
ItemCharacteristics
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃)
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
-40 ~ +85℃
4 ~ 100VDC
1 ~ 1500μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 2000hrs at 85℃,
the capacitors shall meet the following requirements.
Capacitance Change
Dissipation Factor Not more than 200% of the specified value
Leakage Current
425
743222222
1586443333
Within ±20% of the initial value
Not more than the specified value
50100636.3101635
Shelf Life
After placed at 85℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
■
( ) : Reference size
■ Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)
Coefficient0.80
ψD
4.0
5.0
6.3
6.3
8.010.28.310.0 Max3.40.90±0.23.1±0.2
10.010.210.312.0 Max3.50.90±0.24.6±0.2
LA H IWP
5.4
5.4
5.4
7.76.67.8 Max
4.3
5.3
6.6
5.5 Max
6.5 Max
7.8 Max
12060
1.8
0.65±0.1
2.21.5±0.2
0.65±0.1
2.6
0.65±0.1
2.60.65±0.11.8±0.20.35
1K
1.0±0.20.35
1.8±0.2
1.001.151.25
K
+0.15
-0.20
+0.15
0.35
-0.20
+0.15
0.35
-0.20
+0.15
-0.20
0.70±0.20
0.70±0.20
10K
Page 2
4(5)
16(20)
6.3(8)
SURFACE MOUNT ALUMINUM ELECTROLYTIC
Rated (Surge) Voltage
10(13)
General purpose
GV
Rated (Surge) Voltage
25(32)
35(44)
50(63)
Series
■Dimensions,Max Dissipation Factor,Max Permissible Ripple Current
●Features : 85℃ 3000~5000 hours,Longer life than GV, Low profile vertical chip
●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer,
OA/HA/Communication
●Corresponding product to RoHS
■
ItemCharacteristics
Operating Temperature Range
Rated Voltage Range (WV)
Rated Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃)
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
-40 ~ +85℃
4 ~ 100VDC
1 ~ 1000μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 3000~5000 hours at 85℃,
the capacitors shall meet the following requirements.
Capacitance Change
Dissipation Factor
Leakage Current
4
743222222
1586443333
Within ±20% of the initial value
Not move than 200% of the specified value
Not more than the specified value
2516
Case (ψ)
ψD≦6.3
ψD≧8
Life time (hrs)
1006.310355063
3000
5000
Shelf Life
After placed at 85℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
■
ψD
5.05.45.36.5 Max2.20.65±0.11.5±0.2
6.35.46.67.8 Max2.60.65±0.11.8±0.2
8.06.28.39.5 Max3.40.65±0.12.2±0.2
8.010.28.310.0 Max3.40.90±0.23.1±0.2
10.010.210.312.0 Max3.50.90±0.24.6±0.2
LAHIWP
■ Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)601201K
Coefficient0.80
1.001.151.25
K
1.85.5 Max4.35.44.0
1.0±0.20.65±0.10.35
+0.15
-0.20
+0.15
0.35
-0.20
+0.15
0.35
-0.20
+0.15
0.35
-0.20
0.70±0.2
0.70±0.2
10K
Page 4
Long Life
FV
Series
■Dimensions,Max Dissipation Factor,Max Permissible Ripple Current
●Features : 105℃ 1000 hours , Higher temperature range Than GV, Low profile vertical chip
●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer,
OA/HA/Communication
●Corresponding product to RoHS
■ Specifications
Item
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃)
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
-40 ~ +105℃
4 ~ 100VDC
1 ~ 1500μF
± 20 % at 120Hz , 20
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
WV
Z(120HZ)
Z(-25℃) / Z(20℃
Z(-40℃) / Z(20℃
After applying rated voltage for 1000hrs at 105℃,
the capacitors shall meet the following requirements.
Capacitance Change
Dissipation Factor
Leakage Current
450100
Characteristics
Within ±20% of the initial value
Not more than 200% of the specified value
Not more than the specified value
636.310163525
Shelf Life
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
■ Diagram of Dimensions(mm)
( ) : Reference size
■ Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)60
Coefficient0.851.00
ψD
4.0
5.0
6.35.46.6
6.3
8.010.28.310.0 Max3.40.90±0.23.1±0.20.70 ±0.2
10.010.210.312.0 Max3.50.90±0.24.6±0.20.70 ±0.2
LA H IWP
4.35.45.5 Max
5.42.26.5 Max
5.3
7.8 Max
6.67.77.8 Max
120
1.8
0.65±0.1
2.60.65±0.1
1K
1.0±0.2
1.8±0.2
1.8±0.20.65±0.1
1.15
K
0.35
0.350.65±0.11.5±0.2
0.35
0.352.6
10K
1.25
Page 6
General Purpose
4.7
4x5.4
0.162010
4x5.4
0.30244x5.4
0.162822
4x5.4
0.35204x5.4
0.30294x5.4
0.30365x5.4
0.16394x5.4
0.30455x5.4
0.20395x5.4
0.30466.3x5.4
0.20654x5.4
0.30435x5.4
0.30465x5.4
0.20395x5.4
0.30466.3x5.4
0.30706.3x5.4
0.20705x5.4
0.35476.3x5.4
0.30716.3x5.4
0.20706.3x5.4
0.35716.3x7.7
0.30
110
6.3x7.7
0.20
130
6.3x5.4
0.35746.3x7.7
0.30
115
6.3x7.7
0.20
105
6.3x7.7
0.35
120
8x10.2
0.26
160
8x10.2
0.20
150
6.3x7.7
0.35
175
8x10.2
0.20
170
8x10.2
0.35
230
10x10.2
0.20
230
8x10.2
0.26
230
8x10.2
0.20
230
10x10.2
0.26
270
10x10.2
0.20
340
680
10x10.2
0.20
380
8x10.2
0.35
300
10x10.2
0.26
390
10x10.2
0.35
400
1500
10x10.2
0.35
480
1
4x5.4
0.12102.2
4x5.4
0.12154x5.4
0.12163.3
4x5.4
0.12184x5.4
0.12164.7
4x5.4
0.14224x5.4
0.12225x5.4
0.12234x5.4
0.14224x5.4
0.12255x5.4
0.14285x5.4
0.12305x5.4
0.14355x5.4
0.14356.3x5.4
0.14556.3x5.4
0.14605x5.4
0.14456.3x5.4
0.14
60
6.3x7.7
0.12
70
6.3x5.4
0.16656.3x7.7
0.14
84
8x10.2
0.12
91
6.3x5.4
0.16706.3x7.7
0.14
84
6.3x7.7
0.12
75
6.3x7.7
0.16918x10.2
0.14
98
8x10.2
0.12956.3x7.7
0.16956.3x7.7
0.14
105
8x10.2
0.12
110
8x10.2
0.16
130
8x10.2
0.14
120
10x10.2
0.12
145
8x10.2
0.16
160
8x10.2
0.14
170
10x10.2
0.16
273
10x10.2
0.14
240
8x10.2
0.16
180
10x10.2
0.16
340
470
10x10.2
0.16
360
3.3
8x10.2
0.18304.7
6.3x5.4
0.18
20
8x10.2
0.185010
6.3x5.4
0.18
20
8x10.2
0.185522
8x10.2
0.183010x10.2
0.186033
8x10.2
0.183010x10.2
0.186547
8x10.2
0.184510x10.2
0.1865100
10x10.2
0.18
60
Size:D
x L(mm).
tanδ:20℃,120Hz.
Ripple Current: 105
,120Hz,(mA/rms).
SURFACE MOUNT ALUMINUM ELECTROLYTIC
SV
Series
■Dimensions,Max Dissipation Factor,Max Permissible Ripple Current
Capacitance
(μF)
Size
4(5)6.3(8)
tanδ
RippleSize
Rated (Surge) Voltage
tanδ
RippleSize
10(13)
tanδ
RippleSize
16(20)
tanδ
Ripple
334x5.40.3526
47
1005x5.40.35
220
330
470
1000
Capacitance
(μF)
10
22
33
6.3x5.4
Size
0.354x5.4
0.3582
25(32)35(44)
tanδ
4x5.40.343
34
61
8x10.20.35300
Rated (Surge) Voltage
RippleSize
tanδ
8x10.20.26200
RippleSize
6.3x5.4
6.3x7.7
50(63)
tanδ
0.1235
0.1265
Ripple
47
100
10x10.20.12220
33010x10.20.14
Capacitance
(μF)
☆
Size
ψ
Rated (Surge) Voltage
63(79)100(125)
tanδ
☆
RippleSize
☆
tanδ
250
Ripple
℃
210
Page 7
Specifications
432222228644333
3
Diagram of Dimensions(mm)
)
Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer,
SURFACE MOUNT ALUMINUM ELECTROLYTIC
DV
Long Life
Series
●Features : 105℃ 2000 hours , Longer life than SV, Low profile vertical chip
●
OA/HA/Communication
●Corresponding product to RoHS
■
Item
Characteristics
Operating Temperature Range
Rated Voltage Range (WV)
Rated Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
-40 ~ +105℃
6.3 ~ 100VDC
1 ~ 1500μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard ratings
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 2000hrs at 105℃,
the capacitors shall meet the following requirements.
Case (ψ)
Capacitance Change
Dissipation Factor
Leakage Current
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
6.3
Within ±25% of the initial value
Not more than 200% of the specified value
Not more than the specified value
10
ψ4 toψ6.3
16
356325100
Within ±20% of the initial value
50
ψ8 toψ10
■
LAH IWP
4.35.5 Max1.80.65±0.1
5.4
5.4
5.36.5 Max
7.8 Max2.60.65±0.11.8±0.2
2.20.65±0.1
2.60.65±0.11.8±0.20.35
( ) : Reference size
ψD
4.0
5.0
6.35.46.6
6.37.76.67.8 Max
8.010.28.310.0 Max3.40.90±0.23.1±0.20.70±0.20
10.010.210.312.0 Max3.50.90±0.24.6±0.20.70±0.20
■ Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)
601201K
1.15Coefficient0.851.00
1.0±0.2
1.5±0.2
0.35
0.35
0.35
10K
1.25
K
+0.15
-0.20
+0.15
-0.20
+0.15
-0.20
+0.15
-0.20
Page 8
Size:D
x L(mm).
tanδ:20℃,120Hz.
Ripple Current: 105
,120Hz,(mA/rms).
SURFACE MOUNT ALUMINUM ELECTROLYTIC
DV
Long Life
Series
■Dimensions,Max Dissipation Factor,Max Permissible Ripple Current
●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer, Battery charger,
DC/DC converter,SMPS,Noise filter
●Corresponding product to RoHS
■
Item
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃)
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-55 ~ +105℃
6.3 ~ 50VDC
0.1 ~ 1500μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Characteristics
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
■
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage with rated ripple current for 1000~2000hrs at 105℃,
the capacitors shall meet the following requirements.
Capacitance Change
Dissipation Factor
Leakage Current
DΦ
Life
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
6.310163525
222222
443333
6.3VF Within ±30% of the initial value,10-50VFWithin ±20% of the initial value
Not more than 200% of the specified value
Not more than the specified value
ItemCharacteristics
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃)
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-55 ~ +105℃
6.3 ~ 35VDC
4.7 ~ 1500μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes)
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
■
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage with rated ripple current for 2000 hours at 105℃,
the capacitor shall meet the following requirement.
Capacitance Change
Dissipation Factor
Leakage Current
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
6.310163525
Within±30% of the initial value
Not more than 200% of the specified value
Not more than the specified value
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-55 ~ +105℃
6.3 ~ 35VDC
10~ 1800μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes)
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Characteristics
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
■
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage with rated ripple current for 2000 hours at 105℃,
the capacitor shall meet the following requirement.
Capacitance Change
Dissipation Factor
Leakage Current
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
6.310163525
Within±30% of the initial value
Not more than 200% of the specified value
Not more than the specified value
Item
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-55 ~ +105℃
6.3 ~ 50VDC
1.0 ~ 1000μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes)
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Characteristics
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
■
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage with rated ripple current for 3000~5000 hours at 105℃,
the capacitor shall meet the following requirement.
Capacitance Change
Dissipation Factor
Leakage Current
DΦ
Life3000hrs5000hrs
After placed at 105℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
6.310163525
Within±30% of the initial value
Not more than 200% of the specified value
Not more than the specified value
☆CASE SIZE:ψDxL(mm)、 MAX DISSIPATION FACTOR :tanδ / 120Hz,20℃、
MAX PERMISSIBLE RIPPLE CURRENT:RC(mArms) / 100KHz,105℃、
MAX IMPEDANCE:Z(Ω) / 100KHz,20℃
Page 19
Specifications
222223333
3
Diagram of Dimensions(mm)
)
SURFACE MOUNT ALUMINUM ELECTROLYTIC
HV
Ultra Low Impedance & High temperature
Series
●Features : 125℃1000~ 2000 hours ,Higher temperature range
●Recommended Applications: Automatic Mounting and Reflow Soldering
●Corresponding product to RoHS
■
Item
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-40 ~ +125℃
10 ~ 50VDC
47 ~ 1000μF
± 20 % at 120Hz , 20℃
I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes)
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Characteristics
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
■
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 1000~2000 hours at 125℃,
the capacitor shall meet the following requirement.
Capacitance Change
Dissipation Factor
DΦ
Life1000hrs2000hrs
After placed at 125℃without voltage applied for 1000 hours(500 hours for 8x6.2),
the capacitor shall meet the same requirement as Endurance.
1016255035
Within±30% of the initial value
Not more than 300% of the specified value
☆CASE SIZE:ψDxL(mm)、 MAX DISSIPATION FACTOR :tanδ / 120Hz,20℃、
MAX PERMISSIBLE RIPPLE CURRENT:RC(mArms) / 120Hz,125℃、
Page 21
43222286443
3
)
SURFACE MOUNT ALUMINUM ELECTROLYTIC
CV
Low Leakage
Series
●Features : 85℃ 2000 hours , Low profile vertical chip,
Low Leakage current ( 0.5μA to 2.0μA max.)
●Recommended Applications: Security System , Backup Battery
●Corresponding product to RoHS
■ Specifications
Item
Operating Temperature Range
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
Leakage Current (MAX) (20℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
-40 ~ +85℃
6.3 ~ 50VDC
1 ~ 100μF
± 20 % at 120Hz , 20℃
I≦0.002CV or 0.5μA whichever is greater(After rated voltage applied for 2 minutes)
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
Characteristics
WV
Low Temperature Stability
Impedance Ratio (MAX)
Endurance
Shelf Life
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 2000 hours at 85℃,
the capacitor shall meet the following requirement.
Capacitance Change
Dissipation Factor
Leakage Current
After placed at 85℃without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
■ Diagram of Dimensions(mm)
6.3101635
Within ±25% of the initial value
Not more than 200% of the specified value
Not more than the specified value
●Recommended Applications: Suitable for AV(TV,Video,Audio),Monitor/Computer,
OA/HA/Communication,Reversed polarity circuit
●Corresponding product to RoHS
■ Specifications
ItemCharacteristics
-40 ~ +105℃
Rated Voltage Range (WV)
Capacitance Range
Capacitance Tolerance
℃
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Low Temperature Stability
Impedance Ratio (MAX)
6.3 ~ 35VDC
1 ~ 47μF
± 20 % at 120Hz , 20
I≦0.01CV or 3(μA) , whichever is greater. (After rated voltage applied for 2 minutes )
I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V)
Shown in the table of standard rating
WV
Z(120HZ)
Z(-25℃) / Z(20℃)
Z(-40℃) / Z(20℃)
After applying rated voltage for 2000hrs at 105℃,
10163525
432222
864433
506.3
Endurance
Shelf Life
Capacitance Change
Dissipation Factor
Leakage Current
After placed at 105℃ without voltage applied for 1000 hours,
the capacitor shall meet the same requirement as Endurance.
■ Diagram of Dimensions(mm)
( ) : Reference size
Within ±20% of the initial value
Not more than 200% of the specified value
Not more than the specified value
ψD
4.0
5.0
6.32.6
LA H IWP
5.4
5.4
5.4
6.5 Max
5.32.2
6.6
7.8 Max
1.84.35.5 Max
0.65±0.11.0±0.2
0.65±0.1
0.65±0.10.35
1.5±0.2
1.8±0.2
0.35
0.35
K
■ Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)601201K
Coefficient0.85
1.001.10
10K
1.20
Page 24
Non-polar
Series
Size:D
x L(mm).
tanδ:20℃,120Hz.
Ripple Current: 105
,120Hz,(mA/rms).
NV
■Dimensions,Max Dissipation Factor,Max Permissible Ripple Current