Page 1
TE200 THRU TE2010
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l 2.0 ampere operation at TA=55 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Glass passivated junction in DO-15 package
MECHANICAL DATA
Case: Molded plastic , DO-15
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DO-15
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375"(9.5mm) Lead Length at
TA=55
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 2.0A 1.1 V
Maximum Reverse Current Ta=25
at Rated DC Blocking Voltage Ta=100
Typical Junction capacitance (Note 1) 25
Typical Thermal Resistance (Note 2) RJA 25 /W
Operating and Storage Temperature Range
TA
TE200 TE201 TE202 TE204 TE206 TE208 TE2010
2.0 A
70 A
5.0
50
-55 TO +150
UNITS
A
A
F
P
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B
Page 2
mounted.
RATING AND CHARACTERISTIC CURVES
TE200 THRU TE2010
Fig. 1-TYPICAL FORWARD CHARACTERISTICS Fig. 2-PEAK FORWARD SURGE CURRENT
Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 4-TYPICAL JUNCTION CAPACITANCE
Loading...