Page 1
TD62101,103~105P/F
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TD62101P,TD62101F,TD62103P,TD62103F
TD62104P,TD62104F,TD62105P,TD62105F
7CH DARLINGTON SINK DRIVER
The TD62101P / F series are high-voltage, high-current
darlington drivers comprised of seven NPN darlington pairs.
FEATURES
l Output current (single output) : 500 mA (max)
l High sustaining voltage output : 25 V (min)
l Inputs compatible with various types of logic.
l Package type−P : DIP−16 pin.
l Package type−F : SOP−16 pin.
TYPE INPUT BASE RESISTOR DESIGNATION
TD62101P / F External General Purpose
TD62103P / F 2.7kΩ TTL, 5 V CMOS
TD62104P / F 10.5kΩ 6~15 V CMOS, PMOS
TD62105P / F 20kΩ 12~25 V CMOS, PMOS
PIN CONNECTION
(TOP VIEW)
SCHEMATICS
TD62101P / F
Weight
DIP16−P−300−2.54A : 1.11 g (typ.)
SOP16−P−225−1.27 : 0.16 g (typ.)
(EACH DRIVER)
Note: The input and output parasitic diodes cannot be
used as clamp diodes.
1
2001-06-28
Page 2
TD62101,103~105P/F
SCHEMATICS
(EACH DRIVER)
TD62103P / F TD62104P / F TD62105P / F
Note: The input and output parasitic diodes cannot be used as clamp diodes.
MAXIMUM RATINGS
CHARACTERISTICS SYMBOL RATING UNIT
Output Sustaining Voltage V
Output Current I
Input Voltage V
Input Current I
Power Dissipation
Operating Temperature
Storage Temperature T
(Ta = 25°C)
P 1.0
F
P −30~75
F
−0.5~25 V
CE (SUS)
IN
IN
OUT
(Note 1) −0.5~30 V
(Note 2) 25 mA
P
D
T
opr
stg
500 mA / ch
0.625 (Note 3)
−40~85
−55~150
W
°C
°C
Note 1: Except TD62101P / F
Note 2: Only TD62101P / F
Note 3: On Glass Epoxy PCB (30 × 30 × 1.6 mm Cu 50%)
RECOMMENDED OPERATING CONDITIONS
(Ta = −40~85°C and Ta = −30~75°C for only Type−P)
CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT
Output Sustaining Voltage V
Output Current I
Input Voltage Except TD62101P / F V
Input Current Only TD62101P / F I
Power Dissipation
P ― ― 0.44
F
Note: On Glass Epoxy PCB (30 × 30 × 1.6 mm Cu 50%)
CE (SUS)
OUT
IN
IN
P
D
DC 1 Circuit 0 ― 350
Tpw = 25 ms, Duty = 10%
7 Circuits, Ta = 85°C, T
0 ― 25 V
= 120°C
j
0 ― 20 V
― ― 10 mA
(Note) ― ― 0.325
0 ― 300
mA /
ch
W
2
2001-06-28
Page 3
TD62101,103~105P/F
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC SYMBOL
Output Leakage
Current
Collector−Emitter Saturation Voltage V
DC Current Transfer Ratio h
Output On
Input
Current
Output Off
Input
Voltage
Input Capacitance C
Turn−On Delay t
Turn−Off Delay t
Output On
P Ta = 75°C ― ― 100
F
TD62101P / F
TD62103P / F VIN = 2.4 V, I
TD62104P / F VIN = 13.5 V, I
TD62105P / F
P Ta = 75°C 50 65 ―
F
TD62103P / F ― ― 2.1
TD62104P / F ― ― 4
TD62105P / F
TD62103P / F ― ― 2.7
TD62104P / F ― ― 7
TD62105P / F
TD62103P / F ― ― 3.3
TD62104P / F ― ― 8.8
TD62105P / F
I
CEX
CE (sat)
FE
I
IN (ON)
I
IN (OFF)
V
IN (ON)
IN
ON
OFF
TEST CIRCUIT
(Ta = 25°C)
TEST
CIR−
CUIT
1
2
2 VCE = 2 V, I
3
4
5 V
6 V
7
TEST CONDITION MIN TYP. MAX UNIT
V
= 25 V
CE
I
= 0
IN
I
= 350 mA, IIN = 600 µA ― 1.3 2.2
OUT
I
= 200 mA, IIN = 400 µA ― 1.1 2.0
OUT
I
= 100 mA, IIN = 200 µA ― 1.0 1.8
OUT
VIN = 1.5 V, I
V
= 1.75 V, I
IN
V
= 20.0 V, I
IN
=
I
OUT
500 µA
= 2 V
CE
= 0, f = 1 MHz ― 15 ― pF
IN
= 25 V, RL = 70 Ω
V
OUT
C
= 15 pF
L
Ta = 85°C ― ― 100
= 350 mA 1000 ― ―
OUT
= 350 mA ― 0.25 ―
OUT
= 350 mA ― 1.00 ―
OUT
= 350 mA ― 0.4 0.7
OUT
= 350 mA ― 1.2 1.7
OUT
= 350 mA ― 1.0 1.5
OUT
Ta = 85°C 50 65 ―
I
=
OUT
125 mA
― ― 6.4
I
=
OUT
250 mA
― ― 12
I
=
OUT
350 mA
― ― 15
― 0.1 ―
― 0.2 ―
µA
V
mA
µA
V
µs
1. I
2. hFE, V
CEX
CE (sat)
3. I
IN (ON)
3
2001-06-28
Page 4
TEST CIRCUIT
TD62101,103~105P/F
4. I
7. tON, t
IN (OFF)
OFF
5. V
IN (ON)
6. CIN
Note 1: Pulse Width 50 µs, Duty Cycle 10%
Output Impedance 50 Ω, t
Note 2: See right.
Note 3: C
includes probe and jig capacitance.
L
r
≤ 5 ns, tf ≤ 10 ns
INPUT CONDITION
TYPE NUMBER R
TD62101P / F 2.7 kΩ 3 V
TD62103P / F 0 Ω 3 V
TD62104P / F 0 Ω 8 V
TD62105P / F 0 Ω 15 V
I
PRECAUTIONS for USING
This IC does not include built-in protection circuits for excess current or overvoltage.
If this IC is subjected to excess current or overvoltage, it may be destroyed.
Hence, the utmost care must be taken when systems which incorporate this IC are designed.
Utmost care is necessary in the design of the output line, GND line since IC may be destroyed due to
short−circuit between outputs, air contamination fault, or fault by improper grounding.
V
IH
4
2001-06-28
Page 5
TD62101,103~105P/F
5
2001-06-28
Page 6
TD62101,103~105P/F
6
2001-06-28
Page 7
TD62101,103~105P/F
PACKAGE DIMENSIONS
DIP16−P−300−2.54A Unit: mm
Weight: 1.11 g (typ.)
7
2001-06-28
Page 8
TD62101,103~105P/F
PACKAGE DIMENSIONS
SOP16−P−225−1.27 Unit: mm
Weight: 0.16 g (typ.)
8
2001-06-28
Page 9
TD62101,103~105P/F
A
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
000707EB
· The information contained herein is subject to change without notice.
9
2001-06-28
Loading...