Datasheet T-51382D064J-FW-P-AC Datasheet (OPTREX)

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 1/24

LCD Module Technical Specification

T-51382D064J-FW-P-AC

NO. ITEM PAGE

- Contents 1
1 Application 2
2 Features 2
3 Mechanical Specifications 2
4 Mechanical Drawing of TFT-LCD module 3
5 Input / Output Terminals 4
6 Absolute Maximum Ratings 6
7 Electrical Characteristics 6
8 Optical Characteristics 15
9 Handling Cautions 17

10 Reliability Test 18
11 Indication of Label 18
12 Block Diagram 19
13 Standard 20
14 Packing 23

- Revision History 24

Checked by (ACI Engineering Div.)

Checked by (Quality Assurance Div.)

Approved by (Production Div.)

Prepared by (Production Div.)

Type No.

Aug 12, 2002

OPTREX

First Edition

Final Revision

******

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 2/24

1. Application

This product applies computer peripheral, industrial meter , image communication

and multi-media.

2. Features

. Compatible with VGA-480 , VGA-400 , VGA-350 and free format.
. Pixel in stripe configuration

. Slim and compact
. Display Colors : 262,144 colors

. Image Reversion : Up/Down and Left/Right
. Active area / Outline area = 62.3 %
. Viewing Direction : 6 o’clock
. Backlight lamps are Replaceable
. Wide Viewing Angle

3. Mechanical Specifications

Parameter Specifications Unit

Screen Size 6.4 (diagonal) inch

Display Format

640×R, G, B×480

dot

Active Area

129.6(H)×97.44 (V)

mm

Dot Pitch

0.0675 (H)×0.203 (V)

mm

Pixel Pitch

0.203 (H)×0.203 (V)

mm

Pixel Configuration Stripe

Outline Dimension See Mechanical Drawing mm

Weight 335±10 g

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 3/24

4. Mechanical Drawing of TFT-LCD Module

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 4/24

5. Input / Output Terminals

5-1) TFT-LCD Panel Driving

Pin No. Symbol Function Remark

1 GND Ground (0V)
2 CLK Clock Signal for Sampling Image Digital Data
3 Hsync Horizontal Synchronous Signal Note 5-1
4 Vsync Vertical Synchronous Signal Note 5-1
5 GND Ground (0V)
6 R0 Red Image Data Signal (LSB)
7 R1 Red Image Data Signal
8 R2 Red Image Data Signal

9 R3 Red Image Data Signal
10 R4 Red Image Data Signal
11 R5 Red Image Data Signal (MSB)
12 GND Ground (0V)
13 G0 Green Image Data Signal (LSB)
14 G1 Green Image Data Signal
15 G2 Green Image Data Signal
16 G3 Green Image Data Signal
17 G4 Green Image Data Signal
18 G5 Green Image Data Signal (MSB)
19 GND Ground (0V)
20 B0 Blue Image Data Signal (LSB)
21 B1 Blue Image Data Signal
22 B2 Blue Image Data Signal
23 B3 Blue Image Data Signal
24 B4 Blue Image Data Signal
25 B5 Blue Image Data Signal (MSB)
26 GND Ground (0V)
27 DENB Disable
28 VCC DC +5.0V Power Supply
29 VCC DC +5.0V Power Supply
30 R/L Horizontal Image Shift-direction Select Signal Note 5-2
31 U/D Vertical Image Shift-direction Select Signal Note 5-3

Note 5-1 : The TFT-LCD module is compatible with four kinds of VGA timing . They are

VGA-480 , VGA-400 , VGA-350 and freedom mode . The polarization of Hsync and
Vsync determine the timings.

VGA-480 VGA-400 VGA-350 Freedom Mode

Hsync Polarization Negative Negative Positive Positive

Vsync Polarization Negative Positive Negative Positive

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 5/24

Note 5-2 : R/L is the Right/Left shift signal.
(1) R/L= High, U/D= Low (2) R/L= Low, U/D= Low

Note 5-3 : U/D is the Up/Down shift signal.

(1) R/L= High, U/D= Low (2) R/L= High, U/D= High

5-2) Backlight driving

Pin No Symbol Description Remark

1 VL1 Input terminal (Hi voltage side)
2 NC No Connection
3 VL2 Input terminal (Low voltage side) Note 5-4

Note 5-4 : Low voltage side of backlight inverter connects with ground of inverter circuits.
5-3) Input / Output Connector

(A) LCD module connector (Reference)

DF9A-31P-1V

(B) Backlight Connector

JST BHR-03VS-1
Pin No.: 3
Pitch: 4 mm

Red: High Voltage

White: Low Voltage

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 6/24

6. Absolute Maximum Ratings:

GND=0V, Ta=25°C

Parameters SymbolMIN. MAX. Unit Remark

+5V Supply Voltage V

CC

0.0 +6.0 V

Input Signals Voltage V

sig

-0.3 VCC+0.3 V Note 6-1

Storage Temperature T

stg

-30 +70

°C

Operating Temperature T

opa

-20 +70

°C

Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5].

7. Electrical Characteristics

7-1) Recommended Operating Conditions:
A) Driving for TFT-LCD panel

GND = 0V, Ta = 25°C

Parameters Symbol Min. Typ. Max. Unit Remark

+5V Supply Voltage V

CC

+4.75 +5.0 +5.25 V

Supply Input Ripple Voltage V

CCRP

0.1 Vp-p VCC=+5V

Input Signals Voltage (High) V

IH

+2.6 V

Input Signals Voltage (Low) V

IL

+0.5 V

(B) Driving for backlight

Ta = 25°C

Item Symbol Min. Typ. Max. Unit Remark

Tube Current I

f

- 6 - mA

Tube Voltage V

L

- 380 - Vrms

Oscillation - 35 - KHz

Lamp Life Time - 20,000 - Hr

7-2) Power Consumption

Parameters Symbol Typ. Max. Unit Remark

+5V Current Dissipation I

CC

260 300 mA

Input Signals Current (High) I

IH

100

µA

VIH =+5V

Input Signals Current (Low) I

IL

100

µA

VIL =0V
LCD Panel Power Consumption 1.3 W Note 7-1
Backlight Power Consumption 4.56 W Note 7-2

Note 7-1 : The power consumption of backlight is not included.

Note 7-2 : Backlight lamp power consumption is calculated by I

L

×

VL.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 7/24

7-3) Input / Output signal timing chart

Parameters Symbol Format Min. Typ. Max. Unit Note

Frequency Fc=1/Tc All 25.175 MHz Note 7-3

Clock High Time Tckh All 10 ns

Low Time Tckl All 10 ns
Periodic = Line Thp All 31.778

µs

Note 7-3

Hsync 800 1024 clock Note 7-3

Pulse Width Thpw All 2 96 200 clock
Back Porch Thbp All 2 48 64 clock

VGA-480 515 525 1024 line Note 7-3

Periodic = Frame Tvp VGA-400 447 449 1024 line Note 7-3

VGA-350 447 449 1024 line Note 7-3

Vsync Freedom

Mode

1024 line

Pulse Width Tvpw All 1 2 line
Back Porch Tvbp All 1 64 line

Data Setup Time Tds All 10 ns

Hold Time Tdh All 10 ns
Periodic = Line Tep All 800 1024 clock
Pulse Width (H) Tepw All 2 640 800 clock

DENB VGA-480 480 480 line

Display Line No(V) Tvd VGA-400 400 400 line

VGA-350 350 350 line

Freedom

Mode

480 line

Horizontal Display Periodic Thd All 640 640 640 clock
Hsync-CLK
Phase Difference

Thc All 10 Tc-10 ns

Vsync-Hsync
Phase Difference

Tvh All 1 Thp-1 clock

Note 7-3: Tc is the period of sampling clock. In case of low-frequency, the image-flicker may occur.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 8/24

7-4) Display Time Range

(1) Vertical Timing :

(2) Horizontal Timing :

Tvbp

Tvd

Vsync

Hsync

DENB

Tvp

Tvpw

Vsync

(Negative)

(Positive)

Tvh

Hsync

Tds

Thp

Tc

TcklTckh

Hsync

CLK

DENB

CLK

Thpw

Tep

Tepw = Thd

Hsync

(Negative)

(Positive)

Thc

CLK

Tdh

R0~R5

G0~G5

B0~B5

Thbp

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 9/24

(3). Detail of Horizontal Timing :

(a) VGA-480 Mode (Hsync = Negative Polarization)

Item Description Clock Cycles Time

A Horizontal Width 96

3.813 µs

B Horizontal B-Porch 48

1.907 µs

C Horizontal Display 640

25.422 µs

D Horizontal F-Porch 16

0.636 µs

E Horizontal Total 800

31.778 µs

(b) VGA-400 Mode (Hsync = Negative Polarization)

Item Description Clock Cycles Time

A Horizontal Width 96

3.813 µs

B Horizontal B-Porch 48

1.907 µs

C Horizontal Display 640

25.422 µs

D Horizontal F-Porch 16

0.636 µs

E Horizontal Total 800

31.778 µs

(c) VGA-350 Mode (Hsync = Positive Polarization)

Item Description Clock Cycles Time

A Horizontal Width 96

3.813 µs

B Horizontal B-Porch 48

1.907 µs

C Horizontal Display 640

25.422 µs

D Horizontal F-Porch 16

0.636 µs

E Horizontal Total 800

31.778 µs

(d) Free Format (Hsync = Positive Polarization)

Item Description Clock Cycles Time

A Horizontal Width Note 7-3 ---

B Horizontal B-Porch Note 7-3 --­C Horizontal Display Note 7-3 --­D Horizontal F-Porch Note 7-3 ---

E Horizontal Total < 1024 ---

A B C D

E

Reset Horizontal Counter to Zer

o

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 10/24

(4) Detail of Vertical Timing :

(a) VGA-480 Mode (Vsync = Negative Polarization)

Item Description Horizontal Lines Time

A Vertical Width 2

63.5 µs

B Vertical B-Porch 33 1.049 ms
C Vertical Display 480 15.253 ms
D Vertical F-Porch 10

317.8 µs

E Vertical Total 525 16.683 ms

(b) VGA-400 Mode (Vsync = Negative Polarization)

Item Description Horizontal Lines Time

A Vertical Width 2

63.5 µs

B Vertical B-Porch 35 1.112 ms
C Vertical Display 400 12.711 ms
D Vertical F-Porch 12

381.0 µs

E Vertical Total 449 14.268 ms

(c) VGA-350 Mode (Vsync = Positive Polarization)

Item Description Horizontal Lines Time

A Vertical Width 2

63.5 µs

B Vertical B-Porch 60 1.907 ms
C Vertical Display 350 11.122 ms
D Vertical F-Porch 37

1.176 µs

E Vertical Total 449 14.268 ms

(d) Free Format (Vsync = Positive Polarization)

Item Description Horizontal Lines Time

A Vertical Width Note 7-3 ---

B Vertical B-Porch Note 7-3 --­C Vertical Display Note 7-3 --­D Vertical F-Porch Note 7-3 ---

E Vertical Total < 1024 ---

A B C D

E

Reset Vertical Counter to Zer

o

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 11/24

7-5) Horizontal Display Position

Horizontal display position depends on the signal of DENB and the input digital image.
As the rising edge of DENB signal comes, LCD module will create a horizontal sampling
start pulse. At this time, the source driver ICs begin to sample image data and transfer the
digital image data to analogue image data by D/A inverters. Then send the analogue image
signal to the right position of active display area of the LCD panel. If DENB is low, LCD
module will set horizontal display position in default value.

Parameters Symbol Format Min. Typ. Max. Unit Remark

DENB Setup Time Tes All 10 Tc-10 ns

Hold Time Teh All 10 Tc-10 ns
Pulse Width Tepw All 2 640 720 clock

DENB Horizontal VGA-480 144 clock

Keep Sampling Thss VGA-400 144 clock

At Start VGA-350 144 clock

“Low” Pulse Position Free

Format

128 192 clock Note 7-4

Hsync-DENB
Phase Difference

The All 96 160 clock

Note 7-4: In free format condition (Hsync = Positive, Vsync = Positive), if DENB is low, the position
of horizontal sampling start pulse depends on the seven control lines of HP[6:0] Lattice
iSPLSI1032E-LT70 FPGA. The starting position is the count of { 128 + Data(HP[6:0]) }
clock.

7-6) Vertical Display Position

Mode Hsync Vsync V-Start

Position

V-Display Remark

VGA-480 Negative Negative 34 480 lines
VGA-400 Negative Positive 17 400 lines Note 7-5
VGA-350 Positive Negative 30 350 lines Note 7-6

Freedom

Mode

Positive Positive 24 480 lines

Note 7-5: As the format is VGA-400 (Hsync = Negative , Vsync = Positive) , LCD module will adjust
the display area to the center of display . At this time , both of the upper and lower display
areas have 40 blanking lines (the display color is black) . The actual display area is center
400 lines.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 12/24

Note 7-6: As the format is VGA-350 (Hsync = Negative, Vsync = Positive) , LCD module will adjust
the display area to the center of display . At this time , both of the upper and lower display
areas have 65 blanking lines (the display color is black) . The actual display area is center
350 lines.

7-7) Pixel Arrangement
The LCD module pixel arrangement is the stripe.

40 Blanking Lines400 Display Lines40 Blanking Lines

RGBRGBRGBRGBRGBRGBRGBRGBRGBRGBRGBRGBRGBRGB3

rd Line2nd Line

1

st Line480th Line479th Line478th LineRGBRGBRGBRGB1st Pixel640th Pixel1 Pixel =RGB

65 Blanking Lines

35 0 Display Lines

65Blanking Line

s

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 13/24

7-8) Display Color and Gray Scale Reference

Input Color Data

Color Red Green Blue

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0

Basic Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1

Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1

Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0

Darker

Red

↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓

Brighter
Red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Green (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0

Darker

Green

↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓

Brighter
Green (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0
Green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0

Darker

Blue

↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓

Brighter
Blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
Blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 14/24

7-9) Control Board Dip Switch Format

SW1

Item Condition Remark

SW 1-1 Vertical Shift (1 Line) Default (ON)
SW 1-2 Vertical Shift (2 Line) Default (ON)
SW 1-3 Vertical Shift (4 Line) Default (OFF)

SW 1-4 Vertical Shift (8 Line) Default (OFF)
SW 1-5 Vertical Shift (16 Line) Default (OFF)
SW 1-6 Vertical Shift (32Line) Default (ON)

SW2

Item Condition Remark

SW 2-1 Horizontal Shift (1 Line) Default (ON)
SW 2-2 Horizontal Shift (2 Line) Default (ON)
SW 2-3 Horizontal Shift (4 Line) Default (ON)

SW 2-4 Horizontal Shift (8 Line) Default (ON)
SW 2-5 Horizontal Shift (16 Line) Default (OFF)
SW 2-6 Horizontal Shift (32 Line) Default (OFF)

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 15/24

8. Optical Characteristics

8-1) Specification:

Ta=25°C

Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks

Horizontal θ ±

55

±

60

deg Note 8-3

θ

(to 12

o’clock)

35 40 degViewing

Angle

Vertical

θ

(to 6

o’clock)

CR>10

50 55 deg

Contrast Ratio CR 100 180 Note 8-1

Rise Tr 30 ms

Response time

Fall Tf

θ=0°

50 ms

Brightness 300 cd/m2Note 8-2

Lamp Life Time 20,000 hr

x 0.264 0.294 0.324 -

White Chromaticity

y 0.276 0.306 0.336 -

Cross Talk θ=0° 3 % Note 8-4

Luminance when LCD is White

Note 8-1 : CR =

Luminance when LCD is Black

Contrast Ratio is measured in optimum common electrode voltage.
Note 8-2 : Topcon BM-7 (fast) luminance meter 2° field of view is used in the testing (after 20~30

minutes' operation).

Note 8-3 : The definitions of viewing angle diagrams :

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 16/24



YA-YB



Note 8-4 : Cross Talk (CTK) =

YA

×

100%

YA : Brightness of Pattern A
YB : Brightness of Pattern B

Pattern A

(Gray Level 46)

Pattern B

(Gray Level 46, central

black box exclusive)

: Testing Point (A and B are at the same point.

)

YA

YB

1/3
1/3
1/3

1/3 1/3 1/3

Black

(Gray Level 0

)

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 17/24

9. Handling Cautions

9-1) Mounting of module

a) Please power off the module when you connect the input/output connector.
b) Please connect the ground pattern of the inverter circuit surely. If the connection
is not perfect, some following problems may happen possibly.

1.The noise from the backlight unit will increase.

2.The output from inverter circuit will be unstable.

3.In some cases a part of module will heat.
c) Polarizer which is made of soft material and susceptible to flaw must be handled

carefully.

d) Protective film (Laminator) is applied on surface to protect it against scratches and

dirts. It is recommended to peel off the laminator before use and taking care of
static electricity.

9-2) Precautions in mounting

a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,

wipe it with soft dry cloth.

b) Wipe off water drops or finger grease immediately. Long contact with water may

cause discoloration or spots.

c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped

on hard surface. Please handle with care.

d) Since CMOS LSI is used in the module. So take care of static electricity and earth

yourself when handling.

9-3) Adjusting module

a) Adjusting volumes on the rear face of the module have been set optimally before

shipment.

b) Therefore, do not change any adjusted values. If adjusted values are changed, the

specifications described may not be satisfied.

9-4) Others

a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many

hours.
b) Store the module at a room temperature place.
c) The voltage of beginning electric discharge may over the normal voltage because of

leakage current from approach conductor by to draw lump read lead line around.
d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.

Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet.

Wash it out immediately with soap.
e) Observe all other precautionary requirements in handling general electronic

components.
f) Please adjust the voltage of common electrode as material of attachment by 1

module.

9-5) Polarizer mark

a) The polarizer mark is to describe the direction of wide view angle film how to mach

up with the rubbing direction.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 18/24

10. Reliability Test

No Test Item Test Condition

1 High Temperature Storage Test Ta = +70°C, 240 hrs
2 Low Temperature Storage Test Ta = -30°C, 240 hrs
3 High Temperature Operation Test Ta = +70°C, 240 hrs
4 Low Temperature Operation Test Ta = -20°C, 240 hrs

5

High Temperature &
High Humidity Operation Test

Ta = +60°C, 80%RH, 240 hrs

6

Vibration Test

(non-operating)

Frequency:10 ~ 57 HZ /Vibration Width :0.075mm

58-500 H/ / Gravity :9.8m/s

Sweep time: 11 minutes

Test period: 3 hrs for each direction of X, Y, Z

7

Shock Test

(non-operating)

Gravity :490m/s

Direction: ±X, ±Y, ±Z

Pulse Width :11ms,half sine wave

Ta: ambient temperature
[Judgement Criteria]
Under the display quality test conditions with normal operation state , there should be no

change which may affect practical display function.

11. Indication of Label

a) Indicated contents of the Lot number label

Lot number

Products number

Contents of lot number: 1st—Process area: class 1000 ⇒ H

class 100K ⇒ M
2nd~3rd—Module screen size (in inch): 1.8”⇒18, 2.5”⇒25…
5th—Production year: 1999⇒9, 2000⇒A, 2001⇒1…
6th—Production month: 1, 2, 3…9, A, B, C

7th~10th—Serial numbers: 0001~9999

b) Indicated contents of the Product number label

T-51382D064J-FW-P-AC MADE IN TAIWAN



XXXXXXXXXXXXXXXXXXXXX

Module Name of Optrex

Ex. T-51382D064J-FW-P-AC

Barcode Symbol

Barcode Number

Production Country

The Module Manufacture Location

OOO-OOOOOO

O16C6448AF

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 19/24

12. Block Diagram

123

479

478

480123456

1920

Control Board

H

SYNC

VSYNC

DENB

CLK

R[5:0]

G[5:0]

B[5:0]

RL

UD

V

L

GND Backlight

IC V1IC V1 IC V2IC V2 IC V3IC V3 IC V4IC V4

IC H1 IC H2

IC V8 IC V7 IC V6 IC V5

TFT-LCD

Display Area

Backlight

V

L

GND

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 20/24

13. Standard

13-1) Inspection condition

Viewing Angle (Major axis x)

θ < 45° inspection under non-operating condition
θ < 5° inspection under operating condition

TFT-LCD Module

Back-Light Unit

35cm or more

Viewing Zone

13-2) Environment condition

•Ambient Temperature: 25°C ±5°C

•Ambient Humidity: 65±5%RH

•Ambient Luminance: 20 watts fluorescent lamp (about 500 lux)

13-3) Sampling condition

•Lot size: Number of products per model shipped in one day.

•Sampling type: Normal inspection, single sampling

•Sampling Level: Level II

•Sampling method: ISO 2859 (Also known as MIL-STD-105E), unless

otherwise agreed in writing

13-4) Acceptance Quality Level (AQL)

•Major defect: 0.65%

•Minor defect: 1.5%

13-5) Inspection Instrument:

•Pattern Generator: PVI digital pattern Generator.

•DC Power supply: DC 12V

•Luminance color meter: Topcon BM –7

•Others : Micrometer , Microscope, Caliper.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 21/24

Item Specification/Description Classification Note

Display function No Display

Malfunction

Major*

Contrast ratio

(Black, White)

Out of spec. Major* 3

Line defect No obvious

Vertical and Horizontal
line
Defect in bright, dark &
Colored.

Major*

Display

Inspection

(operating)

Point defect
(Red, Green, Blue,
Dark)

(1) Active area ≤ 7 Point

Major** 1

Dimension Outline Major*
Bezel appearance Uneven/poor coating Major**

Scratch on the

polarizer

N=5 max

(W<0.1 or L<=10)

N=0

(W>0.1 or L>10)

Major** 2

Dent or Bubble on

the polarizer

N=5 max

(W<=5 and L<=0.1)

N disregard

(W<=0.1)

Major** 2

External

Inspection

(non-operating)

Foreign material

on polarizer

N=4 max

(W<=0.10 and L<=2.1)

N disregard

(W<=0.03 and L<=0.3)

Major** 2

External

Inspection

(non-operating)

Wrinkle on

polarizer

Serious wrinkle is not

allowed

2

(W-Width in mm, L-Length in mm, N-Number, D-Average Diameter in mm,)
Remark: ”*” Major: Defect that is likely to result in failure or to reduce materially the
usability of the product for the intended function.

“**” Minor: Defect that will not result in functioning problem with deviation
as classified.

Item N Total

Bright

(R,G,B)

5

Dark

5

7

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 22/24

Note: 1. (a)Bright point defect is defined as point defect of R,G,B with area >1/2 pixel

respectively.

(b)Bright point defect which is not visible by using 5% ND filter,is not counted as

a defect.

(c)Definition of distribution of point defect is as follows:

-min separation between point defect should be larger than 4mm.

(d)Definition of joined bright point defect is as follows:

-Three joined bright lot must be nil.

-Joined bright point is 3 pair max.

(e)Definition of joined dark point defect is as follows:

-Three jointed dark point must be nil.

-Coupling of one dark and one bright point in junction is counted as one dark and
one bright spot.

-Two dark point in junction is counted as one dark point.

Note:2. The external inspection is conducted at the distance 35±5cm between the eyes

of inspector and the panel. The inspection area is defined as full screen.

Note:3. Luminance measurement for contrast ratio is at the distance 50±5cm between the

detective head and the panel. With ambient illuminance less than 1 lux. Contrast
ratio is obtained at optimum view angle.

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 23/24

14. Packing

T-51382D064J-FW-P-AC (AC) No. 2002-0168 OPTREX CORPORATION Page 24/24

Revision History

Rev. Issued Date Revised Contents

1.0 Apr. 02, 2002 NEW

1.1 May. 22, 2002 Modify
Page 7 : Absolute Maximum Ratings (Operating Temperature)
Page 19 : Reliability Test Condition
(High & Low Operating Temperature)