Datasheet STD7NM50N, STD7NM50N-1, STF7NM50N, STP7NM50N Datasheet (ST)

Page 1
现货库存、技术资料、百科信息、热点资讯,精彩尽在鼎好!
3
STD7NM50N - STD7NM50N-1
N-channel 500V - 0.70Ω - 5A - TO-220 - TO-220FP - IPAK - DPAK
Second generation MDmesh™ Power MOSFET
Features
V
Type
DSS
(@Tjmax)
STD7NM50N 550V <0.78 5A
STD7NM50N-1 550V <0.78 5A
STF7NM50N 550V <0.78 5A
STP7NM50N 550V <0.78 5A
1. Limited only by maximum temperature allowed
Low input capacitance and gate charge
Low gate input resistance
Description
R
DS(on)
I
STF7NM50N - STP7NM50N
D
3
(1)
2
1
TO-220
3
1
DPAK
Internal schematic diagram
IPAK
1
TO-220FP
2
1
3
2
This device is realized with the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters
Application
Switching application
Order codes
Part number Marking Package Packaging
STD7NM50N-1 D7NM50N IPAK Tube
STD7NM50N D7NM50N DPAK Tape & reel
STF7NM50N F7NM50N TO-220FP Tube
STP7NM50N P7NM50N TO-220 Tube
April 2007 Rev 1 1/17
www.st.com
17
Page 2
Contents STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
Page 3
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Electrical ratings
1 Electrical ratings
Table 1. Absolute maximum ratings
Value
Symbol Parameter
TO-220 / DP AK
IPAK
TO-220FP
Unit
V
DS
V
GS
I
I
I
DM
P
TOT
dv/dt
D
D
Drain-source voltage (VGS=0)
Gate-source voltage ± 25 V
Drain current (continuous) at TC = 25°C
Drain current (continuous) at TC = 100°C
(2)
Drain current (pulsed) 20
Total dissipation at TC = 25°C
(3)
Peak diode recovery voltage slope 15 V/ns
Insulation withstand voltage (RMS) from
V
ISO
all three leads to external heat sink (t=1s;TC=25°C)
T
T
stg
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD 5A, di/dt 400A/µs, VDD =80% V
Operating junction temperature
j
Storage temperature
(BR)DSS
Table 2. Thermal data
Symbol Parameter
500 V
5
3
(1)
5
(1)
3
20
45 20 W
-- 2500 V
-55 to 150 °C
Max value
TO-220 / DP AK
IPAK
TO-220FP
(1)
A
A
A
Unit
Rthj-case Thermal resistance junction-case max 2.78 6.25 °C/W
Rthj-amb Thermal resistance junction-amb max 62.5 °C/W
T
Maximum lead temperature for soldering
l
purpose
300 °C
Table 3. Avalanche characteristics
Symbol Parameter Max value Unit
I
AS
E
AS
Avalanche current, repetitive or not­repetitive (pulse width limited by Tj max)
Single pulse avalanche energy (starting Tj=25°C, I
D=IAS
, VDD= 50V)
2A
100 mJ
3/17
Page 4
Electrical characteristics STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
2 Electrical characteristics
(T
=25°C unless otherwise specified)
CASE
Table 4. On/off states
Symbol Parameter Test conditions Min Typ Max Unit
V
(BR)DSS
dv/dt
I
DSS
I
GSS
V
GS(th)
R
DS(on)
1. Characteristics value at turn off on inductive load
Drain-source breakdown voltage
(1)
Drain-source voltage slope
Zero gate voltage drain current (V
GS
= 0)
Gate body leakage current
= 0)
(V
DS
Gate threshold voltage
Static drain-source on resistance
= 1mA, VGS= 0
I
D
Vdd = 400V, Id = 5A, Vgs = 10V
V
= Max rating,
DS
V
= Max rating,Tc = 125°C
DS
= ±20V
V
GS
= VGS, ID = 250µA
V
DS
VGS= 10V, ID=2.5A
500 V
40 V/ns
1
100µAµA
100 nA
234V
0.70 0.78
Table 5. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
C
oss eq.
(1)
g
fs
C
C
C
Forward transconductance
Input capacitance
iss
Output capacitance
oss
Reverse transfer
rss
capacitance
Equivalent output
(2)
capacitance
V
DS
V
DS
V
GS
f=1MHz Gate DC Bias=0
Rg Gate input resistance
Test signal level=20mV Open drain
Q
g
Total gate charge
Q
Q
1. Pulsed: pulse duration = 300µs, duty cycle 1.5%
2. C increases from 0 to 80% V
Gate-source charge
gs
Gate-drain charge
gd
. is defined as a constant equivalent capacitance giving the same charging time as C
oss eq
DSS
V
DD
V
GS
(see Figure 16)
=15V, ID= 2.5A
= 50V, f =1 MHz, V
GS
= 0
4S
400
35
4
pF pF pF
= 0V, VDS = 0V to 400V 67 pF
6
= 400V, ID = 5A
= 10V
12
2 6
when VDS
oss
nC nC nC
4/17
Page 5
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Electrical characteristics
Table 6. Switching times
Symbol Parameter Test conditions Min Typ Max Unit
t
d(on)
t
d(off)
Turn-on delay time
t
Rise time
r
Turn-off delay time Fall time
t
f
= 250V, ID = 2.5A,
V
DD
= 4.7Ω, VGS = 10V
R
G
(see Figure 15)
40
7 5
ns ns ns
9
ns
Table 7. Source drain diode
Symbol Parameter T est conditions Min Typ Max Unit
I
SD
I
SDM
V
SD
t
Q
I
RRM
t
Q
I
RRM
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration = 300µs, duty cycle 1.5%
Source-drain current
(1)
Source-drain current (pulsed)
(2)
Forward on voltage
rr
Reverse recovery time Reverse recovery charge
rr
Reverse recovery current
rr
Reverse recovery time Reverse recovery charge
rr
Reverse recovery current
= 5A, V
I
SD
=5A, di/dt =100A/µs,
I
SD
=100V, Tj=25°C
V
DD
GS
= 0
(see Figure 17)
=5A, di/dt =100A/µs,
I
SD
=100V, Tj=150°C
V
DD
(see Figure 17)
250
2
13
330
2
13
5
20
1.3 V
ns µC
ns µC
A A
A
A
5/17
Page 6
Electrical characteristics STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for TO-220 /
DPAK / IPAK
Figure 2. Thermal impedance for TO-220 /
DPAK / IPAK
Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP
Figure 5. Output characteristics Figure 6. Transfer characteristics
6/17
Page 7
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Electrical characteristics
Figure 7. Transconductance Figure 8. Static drain-source on resistance
Figure 9. Gate charge vs. gate-source
voltage
Figure 11. Normalized gate threshold voltage
vs. temperature
Figure 10. Capacitance variations
Figure 12. Normalized on resistance vs.
temperature
7/17
Page 8
Electrical characteristics STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
Figure 13. Source-drain diode forward
characteristics
Figure 14. Normalized BV
vs. temperature
DSS
8/17
Page 9
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Test circuit
3 Test circuit
Figure 15. Switching times test circuit for
resistive load
Figure 17. Test circuit for inductive load
switching and diode recovery times
Figure 16. Gate charge test circuit
Figure 18. Unclamped Inductive load test
circuit
Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
9/17
Page 10
Package mechanical data STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/17
Page 11
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Package mechanical data
TO-220 mechanical data
Dim
Min Typ Max Min Typ Max
mm inch
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c0.49 0.70 0.019 0.027
D 15.25 15.75 0.6 0.62
D1 1.27 0.050
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F1.23 1.32 0.048 0.051
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L3028.90 1.137
P 3.75 3.85 0.147 0.151
Q2.65 2.95 0.104 0.116
11/17
Page 12
Package mechanical data STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
TO-220FP MECHANICAL DATA
DIM.
A 4.4 4.6 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.7 0.017 0.027
F 0.75 1 0.030 0.039
F1 1.15 1.7 0.045 0.067
F2 1.15 1.7 0.045 0.067
G 4.95 5.2 0.195 0.204
G1 2.4 2.7 0.09 4 0.106
H 10 10.4 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 .0 385 0.417
L5 2.9 3 .6 0 .114 0.141
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366
Ø 3 3.2 0.118 0.126
MIN. TYP MAX. MIN. TYP. MAX.
mm. inch
E
A
D
B
L3
L6
L7
F1
F
H
12/17
L2
L5
F2
G1
G
123
L4
Page 13
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Package mechanical data
0068771-E
TO-251 (IPAK) MECHANICAL DATA
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
mm inch
A 2.2 2.4 0.086 0.094
A1 0.9 1.1 0.035 0.043
A3 0.7 1.3 0.027 0.051
B 0.64 0.9 0.025 0.031
B2 5.2 5.4 0.204 0.212
B3 0.85 0.033
B5 0.3 0.012
B6 0.95 0.037
C 0.45 0.6 0.017 0.023
C2 0.48 0.6 0.019 0.023
D 6 6.2 0.236 0.244
E 6.4 6.6 0.252 0.260
G 4.4 4.6 0.173 0.181
H 15.9 16.3 0.626 0.641
L 9 9.4 0.354 0.370
L1 0.8 1.2 0.031 0.047
L2 0.8 1 0.031 0.039
H
C
A
E
= =
C2
L2
B2
= =
D
B3
2
1 3
L1
B6
A1
L
A3
B
B5
G
= =
13/17
Page 14
Package mechanical data STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
DPAK MECHANICAL DATA
DIM.
A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.009
B 0.64 0.9 0.025 0.035 b4 5.2 5.4 0.204 0.212
C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023
D 6 6.2 0 .236 0.244 D1 5.1 0 .200
E 6.4 6.6 0.252 0.260 E1 4.7 0.185
e 2.28 0.090 e1 4.4 4.6 0.173 0.181
H 9.35 10.1 0.368 0.397
L 1 0.039
(L1) 2.8 0.110
L2 0.8 0.031 L4 0.6 1 0.023 0.039
R 0.2 0.008 V2
MIN. TY P MA X. MIN. T YP. MAX.
mm. inch
14/17
0068772-F
Page 15
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N Packaging mechanical data
5 Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
A 330 12.992
B 1.5 0.059
C 12.8 13.2 0.504 0.520
D 20.2 0.795
G 16.4 18.4 0.645 0.724
N 50 1.968
T 22.4 0.881
mm inch
MIN. MAX. MIN. MAX.
TAPE MECHANICAL DATA
DIM.
A0 6.8 7 0.267 0.275
B0 10.4 10.6 0.409 0.417
B1 12.1 0.476
D 1.5 1.6 0.059 0.063
D1 1.5 0.059
E 1.65 1.85 0.065 0.073
F 7.4 7.6 0.291 0.299
K0 2.55 2.75 0.100 0.108
P0 3.9 4.1 0.153 0.161
P1 7.9 8.1 0.311 0.319
P2 1.9 2.1 0.075 0.082
R 40 1.574
W 15.7 16.3 0.618 0.641
mm inch
MIN. MAX. MIN. MAX.
BASE QTY BULK QTY
2500 2500
15/17
Page 16
Revision history STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
6 Revision history
Table 8. Revision history
Date Revision Changes
10-Apr-2007 1 First release
16/17
Page 17
STD7NM50N - STD7NM50N-1 - STF7NM50N - STP7NM50N
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17
Loading...