Page 1
TO-200AC (B-PUK)
PRODUCT SUMMARY
I
T(AV)
Vishay High Power Products
Phase Control Thyristors
(Hockey PUK Version), 650 A
FEATURES
• Center amplifying gate
• Metal case with ceramic insulator
• International standard case TO-200AC (B-PUK)
• High profile hockey PUK
• Lead (Pb)-free
• Designed and qualified for industrial level
TYPICAL APPLICATIONS
• DC motor controls
650 A
• Controlled DC power supplies
• AC controllers
ST330CLPbF Series
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
I
T(AV)
I
T(RMS)
I
TSM
2
t
I
V
DRM/VRRM
t
q
T
J
T
hs
T
hs
50 Hz 9000
60 Hz 9420
50 Hz 405
60 Hz 370
Typical 100 µs
650 A
55 °C
1230 A
25 °C
400 to 2000 V
- 40 to 125 °C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
ST330C..L
V
VOLTAGE
CODE
04 400 500
08 800 900
12 1200 1300
14 1400 1500
16 1600 1700
18 1800 1900
20 2000 2100
DRM/VRRM
, MAXIMUM REPETITIVE PEAK
AND OFF-STATE VOLTAGE
V
V
, MAXIMUM
NON-REPETITIVE PEAK VOLTAGE
RSM
V
I
DRM/IRRM
AT T
A
kA2s
MAXIMUM
= TJ MAXIMUM
J
mA
50
Document Number: 94408 For technical questions, contact: ind-modules@vishay.com
Revision: 16-Oct-08 1
www.vishay.com
Page 2
ST330CLPbF Series
Vishay High Power Products
Phase Control Thyristors
(Hockey PUK Version), 650 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average on-state current
at heatsink temperature
Maximum RMS on-state current I
I
T(RMS)
Maximum peak, one-cycle
non-repetitive surge current
2
Maximum I
Maximum I
t for fusing I2t
2
√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 4050 kA2√s
Low level value of threshold voltage V
High level value of threshold voltage V
Low level value of on-state slope resistance r
High level value of on-state slope resistance r
Maximum on-state voltage V
Maximum holding current I
Typical latching current I
T(AV)
180° conduction, half sine wave
double side (single side) cooled
DC at 25 °C heatsink temperature double side cooled 1230
I
TSM
T(TO)1
T(TO)2
t1
t2
TM
H
L
t = 10 ms
t = 8.3 ms 9420
t = 10 ms
t = 8.3 ms 7920
t = 10 ms
t = 8.3 ms 370
t = 10 ms
t = 8.3 ms 262
(16.7 % x π x I
(I > π x I
(16.7 % x π x I
(I > π x I
Ipk = 1730 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.90 V
TJ = 25 °C, anode supply 12 V resistive load
No voltage
reapplied
100 % V
reapplied
No voltage
RRM
Sinusoidal half wave,
initial T
= TJ maximum
J
reapplied
100 % V
RRM
reapplied
< I < π x I
T(AV)
), TJ = TJ maximum 0.93
T(AV)
< I < π x I
T(AV)
), TJ = TJ maximum 0.57
T(AV)
), TJ = TJ maximum 0.91
T(AV)
), TJ = TJ maximum 0.57
T(AV)
650 (314) A
55 (75) °C
9000
7570
405
287
600
1000
A
kA2s
V
mΩ
mA
SWITCHING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum non-repetitive rate of rise
of turned-on current
Typical delay time t
Typical turn-off time t
dI/dt
d
q
Gate drive 20 V, 20 Ω, t
T
= TJ maximum, anode voltage ≤ 80 % V
J
≤ 1 µs
r
DRM
Gate current 1 A, dIg/dt = 1 A/µs
V
= 0.67 % V
d
, TJ = 25 °C
DRM
ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/µs,
V
= 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω, tp = 500 µs
R
1000 A/µs
1.0
µs
100
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum critical rate of rise of
off-state voltage
Maximum peak reverse and
off-state leakage current
dV/dt T
,
I
RRM
I
DRM
= TJ maximum linear to 80 % rated V
J
TJ = TJ maximum, rated V
DRM/VRRM
DRM
500 V/µs
applied 50 mA
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 94408
2 Revision: 16-Oct-08
Page 3
ST330CLPbF Series
Phase Control Thyristors
Vishay High Power Products
(Hockey PUK Version), 650 A
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
Maximum peak gate power P
Maximum average gate power P
Maximum peak positive gate current I
Maximum peak positive gate voltage + V
Maximum peak negative gate voltage - V
G(AV)
GM
TJ = TJ maximum, tp ≤ 5 ms 10.0
GM
TJ = TJ maximum, f = 50 Hz, d% = 50 2.0
TJ = TJ maximum, tp ≤ 5 ms 3.0 A
GM
TJ = TJ maximum, tp ≤ 5 ms
GM
TJ = - 40 °C
DC gate current required to trigger I
DC gate voltage required to trigger V
DC gate current not to trigger I
DC gate voltage not to trigger V
GT
GT
GD
GD
= 25 °C 100 200
J
T
= 125 °C 50 -
J
TJ = - 40 °C 2.5 -
= 25 °C 1.8 3.0
T
J
= 125 °C 1.1 -
T
J
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
Maximum gate current/voltage
not to trigger is the maximum
TJ = TJ maximum
value which will not trigger any
unit with rated V
anode to
DRM
cathode applied
VALUES
TYP. MAX.
20
5.0
200 -
10 mA
0.25 V
UNITS
W
V
mAT
V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction temperature range T
Maximum storage temperature range T
Maximum thermal resistance, junction to heatsink R
Maximum thermal resistance, case to heatsink R
J
Stg
thJ-hs
thC-hs
DC operation single side cooled 0.11
DC operation double side cooled 0.06
DC operation single side cooled 0.011
DC operation double side cooled 0.005
Mounting force, ± 10 %
Approximate weight 250 g
Case style See dimensions - link at the end of datasheet TO-200AC (B-PUK)
ΔR
CONDUCTION ANGLE
CONDUCTION
thJ-hs
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
TEST CONDITIONS UNITS
180° 0.012 0.010 0.008 0.008
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019
= TJ maximum K/W
T
J
60° 0.026 0.027 0.027 0.028
30° 0.045 0.046 0.046 0.046
Note
• The table above shows the increment of thermal resistance R
when devices operate at different conduction angles than DC
thJ-hs
- 40 to 125
- 40 to 150
9800
(1000)
°C
K/W
N
(kg)
Document Number: 94408 For technical questions, contact: ind-modules@vishay.com
www.vishay.com
Revision: 16-Oct-08 3
Page 4
ST330CLPbF Series
Vishay High Power Products
130
120
110
100
90
80
70
60
50
40
30
0 50 100 150 200 250 300 350 400 450
Maximum Allow able Heatsink Temperature (°C)
Average On-state Current (A)
Fig. 1 - Current Ratings Characteristics
130
120
110
100
90
80
70
60
50
40
30
20
0200400600800
Maximum Allowable Heatsink Temperature (°C)
Average On-st ate Current (A)
Fig. 2 - Current Ratings Characteristics
ST330C..L Series
(Single Side Cooled)
R ( DC) = 0.11 K/ W
thJ-hs
30°
60°
ST330C. .L Serie s
(Single Side Cooled)
R (DC) = 0.11 K/W
thJ-hs
Conduction Period
30°
60°
90°
120°
180°
Conduction Angle
90°
120°
DC
Phase Control Thyristors
(Hockey PUK Version), 650 A
130
120
110
100
90
80
70
60
50
180°
40
30
20
0 200 400 600 800 1000 1200 1400
Maximum Allowable Heatsink Temperature (°C)
1600
1400
1200
1000
800
600
400
200
0
Maximum Averag e On-sta te Pow er Loss (W)
0 100 200 300 400 500 600 700 800
Fig. 5 - On-State Power Loss Characteristics
ST3 30 C . . L Se r ie s
(Double Side Cooled)
R (DC) = 0.05 K/ W
thJ-hs
Conduction Period
30°
60°
90°
120°
180°
DC
Average On-state Current (A)
Fig. 4 - Current Ratings Characteristics
180°
120°
90°
60°
30°
Average On-state Current (A)
RM S Li m i t
Cond uction Ang le
ST3 3 0 C . . L Se r i e s
T = 125°C
J
130
120
110
100
90
80
70
60
50
40
30
20
0 200 400 600 800
Maximum Allowable Heatsink Te mperature (°C)
Average On-state Current (A)
ST330C..L Series
(Double Side Cooled)
R (DC) = 0.05 K/ W
thJ-hs
Cond uc tion Ang le
30°
60°
90°
Fig. 3 - Current Ratings Characteristics
120°
180°
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
Maximum Average On-state Power Loss (W)
DC
180°
120°
90°
60°
30°
RM S Lim i t
Conduction Period
ST33 0C . . L Se r ie s
T = 12 5° C
J
0
0200400600800100012001400
Average On-state Current (A)
Fig. 6 - On-State Power Loss Characteristics
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 94408
4 Revision: 16-Oct-08
Page 5
ST330CLPbF Series
Phase Control Thyristors
(Hockey PUK Version), 650 A
8000
At Any Rated Load Condition And With
Rated V Applied Following Surge.
7500
7000
6500
6000
5500
5000
4500
4000
ST3 3 0 C . . L Se r ie s
Peak Half Sine Wave On-state Current (A)
3500
110100
Numb er Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 7 - Maximum Non-Repetitive Surge Current
RRM
Init ial T = 125°C
J
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
Single and Double Side Cooled
10000
Vishay High Power Products
9000
Maximum Non Repet itive Surge Current
8500
8000
7500
7000
6500
6000
5500
ine Wave On-st a te Curren t (A)
5000
4500
4000
Pea k Ha lf S
3500
Fig. 8 - Maximum Non-Repetitive Surge Current
Versus Pulse Train Durat ion. Con trol
Of Co nduc t ion May Not Be Main ta ine d.
ST330C..L Series
0.01 0.1 1
Pulse Tra in Du ra t io n ( s)
Initial T = 125°C
No Voltage Reapplied
Ra t e d V Re a p p l ie d
J
RRM
Single and Double Side Cooled
Tj = 125 °C
1000
Tj = 25 °C
Instantaneous On-state Current (A)
ST330C..L Series
100
01234567
Instantaneous On-state Voltage (V)
Fig. 9 - On-State Voltage Drop Characteristics
1
St e a d y St a t e V a l u e
R = 0.11 K/W
thJ-hs
thJ-hs
(Single Side Cooled)
R = 0.05 K/W
0.1
thJ-hs
(Double Side Cooled)
(DC Operation)
0.01
ST3 3 0 C . .L Se r i e s
0.001
Transient Thermal Impeda nce Z (K/W)
0.001 0.01 0.1 1 10
Sq u a r e W a v e Pu l se D u r a t i o n ( s)
Fig. 10 - Thermal Impedance Z
Characteristics
thJ-hs
Document Number: 94408 For technical questions, contact: ind-modules@vishay.com
www.vishay.com
Revision: 16-Oct-08 5
Page 6
ST330CLPbF Series
Vishay High Power Products
100
Rectangular gate pulse
a) Recommended load line for
ra t ed di/ dt : 20V, 10ohms; tr<=1 µs
b) Recommended load line for
<=30% rated di/dt : 10V, 10ohms
10
tr<=1 µs
1
Inst ant aneous Gate Voltage (V)
0.1
0.001 0.01 0.1 1 10 100
ORDERING INFORMATION TABLE
VGD
IGD
Phase Control Thyristors
(Hockey PUK Version), 650 A
(1) PGM = 10W, tp = 4ms
(2) PGM = 20W, tp = 2ms
(3) PGM = 40W, tp = 1ms
(4) PGM = 60W, tp = 0.66m s
(a)
(b)
Tj = -4 0 ° C
Tj = 25 ° C
Tj = 1 25 ° C
Devic e: ST330C ..L Series
In st a nt a n e o us G a t e Cu rr e nt ( A )
Fig. 11 - Gate Characteristics
Freq uenc y Limited b y PG(AV)
(1)
(2)
(3)
(4)
Device code
ST 33 0 C 16 L 1 - PbF
324
51
6789
1 - Thyristor
2 - Essential part number
3 - 0 = Converter grade
4
- C = Ceramic PUK
5
- Voltage code x 100 = V
6
- L = PUK case TO-200AC (B-PUK)
7
- 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads)
(see Voltage Ratings table)
RRM
1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads)
2 = Eyelet terminals (gate and auxiliary cathode soldered leads)
3 = Fast-on terminals (gate and auxiliary cathode soldered leads)
8 - Critical dV/dt:
None = 500 V/µs (standard selection)
L = 1000 V/µs (special selection)
9 - Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95076
www.vishay.com For technical questions, contact: ind-modules@vishay.com
6 Revision: 16-Oct-08
Document Number: 94408
Page 7
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Page 8
DIMENSIONS in millimeters (inches)
Outline Dimensions
Vishay High Power Products
TO-200AC (B-PUK)
Case Style TO-200AC (B-PUK)
Creepage distance: 36.33 (1.430) minimum
Strike distance: 17.43 (0.686) minimum
0.7 (0.03) MIN.
27 (1.06) MAX.
0.7 (0.03) MIN.
34 (1.34) DIA. MAX.
2 places
53 (2.09) DIA. MAX.
58.5 (2.3) DIA. MAX.
6.2 (0.24) MIN.
Pin receptacle
AMP. 60598-1
4.7 (0.18)
20° ± 5°
36.5 (1.44)
2 holes DIA. 3.5 (0.14) x 2.5 (0.1) deep
Quote between upper and lower pole pieces has to be considered after
application of mounting force (see thermal and mechanical specification)
Document Number: 95076 For technical questions concerning discrete products, contact: diodes-tech@vishay.com
Revision: 01-Aug-07 For technical questions concerning module products, contact: ind-modules@vishay.com
www.vishay.com
1
Loading...