Datasheet SPT232AIH, SPT232AMH Datasheet (SPT)

General Description

The SPT232 is a wideband low distortion operational amplifier designed
specifically for high speed, low gain applications requiring wide
dynamic range. Utilizing a current feedback architecture, the SPT232
offers high speed performance while maintaining DC precision.

The SPT232 offers precise gains from ±1 to ±5 with a true 0.1%
linearity and provides stable, oscillation-free operation across the
entire gain range without external compensation. The SPT232, a
pin compatible enhanced version of the SPT231, reduces 2nd
and 3rd harmonic distortion to an extremely low -69dBc at 20MHz
(2Vpp, RL = 100Ω). Additional features provided by the SPT232
include a small signal bandwidth of 270MHz, a large signal
bandwidth of 95MHz and a 3000V/µs slew rate. The input offset
voltage is typically 1mV with an input offset drift of 10µV/°C.

The SPT232 combines these high performance features with its

0.05% settling time of 15ns and its 100mA drive capability to
provide high-speed, high-resolution A/D and D/A converter sys­tems with an attractive solution for driving and buffering. Wide
dynamic range systems such as radar and communication re­ceivers requiring low harmonic distortion and low noise will find
the SPT232 to be an excellent choice. As a linedriver, the
SPT232 set at a gain of 2 cancels matched line losses.

The SPT232 is constructed using thin film resistor/bipolar transis­tor technology, and is available in the following versions:
SPT232AIH -25°C to +85°C 12-pin TO-8 can
SPT232AMH -55°C to +125°C 12-pin TO-8 can, features

burn-inand hermetic testing

Features

■

-69dBc 2nd and 3rd harmonics at 20MHz

■

-3dB bandwidth of 270MHz

■

0.005% settling in 15ns

■

3000V/µs slew rate

■

1mV input offset voltage, 10µV/°C drift

■

±10V, 100mA max output

■

Direct replacement for CLC232

Applications

■

Flash A/D drivers

■

DAC current-to-voltage conversion

■

Wide dynamic range IF amps

■

VCO drivers

■

DDS postamps

■

Radar/communication receivers

■

Precision line drivers

Bottom View

Package Dimensions

LOW DISTORTION WIDEBAND OP AMP

4755 Forge Road, Colorado Springs, Colorado 80907, USA

Phone: [phone] FAX: [phone] Website: http://www.spt.com E-Mail: [e-mail]

Spectral Response

Typical Performance

2 10/9/98

SPT232

SPT232 Electrical Characteristics

(Av = +2, Vcc = ±15V, RL = 100Ω, Rf = 250Ω; unless specified)

Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.

Absolute Maximum Ratings Recommended Operating Conditions

3 10/9/98

SPT232

SPT232 Typical Performance Characteristics

(TA = 25°, Av = +2, VCC = ±15V, RL = 100Ω, Rf = 250Ω)

4 10/9/98

SPT232

Signal Processing Technologies, Inc. reserves the right to change products and specifications without notice. Permission is hereby expressly granted to copy this literature
for informational purposes only. Copying this material for any other use is strictly prohibited. W ARNING - LIFE SUPPOR T APPLICATIONS POLICY - SPT products should
not be used within Life Support Systems without the specific written consent of SPT . A Life Support System is a product or system intended to support or sustain life which,
if it fails, can be reasonably expected to result in significant personal injury or death.