Datasheet SN74ABT16600DGGR, SN74ABT16600DL, SN74ABT16600DLR Datasheet (Texas Instruments)

SN54ABT16600, SN74ABT16600

18-BIT UNIVERSAL BUS TRANSCEIVERS

WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D

Members of the Texas Instruments

Widebus

 Family

D

State-of-the-Art

EPIC-ΙΙB

 BiCMOS Design

Significantly Reduces Power Dissipation

D

UBT

 (Universal Bus Transceiver)

Combines D-Type Latches and D-Type
Flip-Flops for Operation in Transparent,
Latched, Clocked, or Clock-Enabled Mode

D

ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015

D

Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17

D

T ypical V

OLP

(Output Ground Bounce)

< 0.8 V at VCC = 5 V, TA = 25°C

D

Flow-Through Architecture Optimizes PCB
Layout

D

Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages and 380-mil
Fine-Pitch Ceramic Flat (WD) Package
Using 25-mil Center-to-Center Spacings

description

These 18-bit universal bus transceivers combine
D-type latches and D-type flip-flops to allow data
flow in transparent, latched, clocked, and
clock-enabled modes.

Data flow in each direction is controlled by
output-enable (OEAB and OEBA), latch-enable
(LEAB and LEBA), and clock (CLKAB

and
CLKBA) inputs. The clock can be controlled by the
clock-enable (CLKENAB and CLKENBA) inputs.
For A-to-B data flow, the device operates in the
transparent mode when LEAB is high. When
LEAB is low, the A data is latched if CLKAB

is held
at a high or low logic level. If LEAB is low, the
A-bus data is stored in the latch/flip-flop on the
high-to-low transition of CLKAB. Output enable
OEAB

is active low. When OEAB is low, the
outputs are active. When OEAB is high, the
outputs are in the high-impedance state.

Copyright  1997, Texas Instruments Incorporated

UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Widebus, EPIC-ΙΙB, and UBT are trademarks of Texas Instruments Incorporated.

SN54ABT16600 . . . WD PACKAGE

SN74ABT16600 . . . DGG OR DL PACKAGE

(TOP VIEW)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29

OEAB

LEAB

A1

GND

A2
A3

V

CC

A4
A5
A6

GND

A7
A8

A9
A10
A11
A12

GND

A13
A14
A15

V

CC

A16
A17

GND

A18

OEBA

LEBA

CLKENAB
CLKAB
B1
GND
B2
B3
V

CC

B4
B5
B6
GND
B7
B8
B9
B10
B11
B12
GND
B13
B14
B15
V

CC

B16
B17
GND
B18
CLKBA
CLKENBA

SN54ABT16600, SN74ABT16600
18-BIT UNIVERSAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

description (continued)

Data flow for B to A is similar to that of A to B, but uses OEBA, LEBA, CLKBA, and CLKENBA.
T o ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT16600 is characterized for operation over the full military temperature range of –55°C to 125°C.

The SN74ABT16600 is characterized for operation from –40°C to 85°C.

FUNCTION TABLE

†

INPUTS

OUTPUT

CLKENAB OEAB

LEAB

CLKAB

A

B

X H X X X Z
X LH XL L
X LH XH H
H LL XXB

0

‡

H LL XXB

0

‡

L LL ↓ LL
L LL ↓ HH
L LL HXB

0

‡

L L L L X B

0

§

†

A-to-B data flow is shown: B-to-A flow is similar but uses OEBA,
LEBA, CLKBA

, and CLKENBA.

‡

Output level before the indicated steady-state input conditions were
established

§

Output level before the indicated steady-state input conditions were
established, provided that CLKAB

was low before LEAB went low

SN54ABT16600, SN74ABT16600

18-BIT UNIVERSAL BUS TRANSCEIVERS

WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

3

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic diagram (positive logic)

CE

1D
C1

CLK

CE
1D
C1

CLK

B1

OEAB

CLKENAB

CLKAB

LEAB

LEBA

CLKBA

CLKENBA

OEBA

A1

1

56

55

2

28

30

29

27

3

54

To 17 Other Channels

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

†

Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, V

I

(except I/O ports) (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high or power-off state, VO –0.5 V to 5.5 V. . . . . . . . . . . . . . . . . . .

Current into any output in the low state, IO: SN54ABT16600 96 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74ABT16600 128 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0) –18 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, I

OK

(VO < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance, θ

JA

(see Note 2): DGG package 81°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DL package 74°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, T

stg

–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

2. The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51.

SN54ABT16600, SN74ABT16600
18-BIT UNIVERSAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

4

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

recommended operating conditions (see Note 3)

SN54ABT16600 SN74ABT16600

MIN MAX MIN MAX

UNIT

V

CC

Supply voltage 4.5 5.5 4.5 5.5 V

V

IH

High-level input voltage 2 2 V

V

IL

Low-level input voltage 0.8 0.8 V

V

I

Input voltage 0 V

CC

0 V

CC

V

I

OH

High-level output current –24 –32 mA

I

OL

Low-level output current 48 64 mA
∆t/∆v Input transition rise or fall rate Outputs enabled 10 10 ns/V
T

A

Operating free-air temperature –55 125 –40 85 °C

NOTE 3: Unused pins (input or I/O) must be held high or low to prevent them from floating.

electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)

TA = 25°C SN54ABT16600 SN74ABT16600

PARAMETER

TEST CONDITIONS

MIN TYP†MAX MIN MAX MIN MAX

UNIT

V

IK

VCC = 4.5 V, II = –18 mA –1.2 –1.2 –1.2 V
VCC = 4.5 V, IOH = –3 mA 2.5 2.5 2.5
VCC = 5 V, IOH = –3 mA 3 3 3

V

OH

IOH = –24 mA 2 2

V

V

CC

= 4.5

V

IOH = –32 mA 2* 2
IOL = 48 mA 0.55 0.55

VOLV

CC

=

4.5 V

IOL = 64 mA 0.55* 0.55

V

V

hys

100 mV

Control inputs

±1 ±1 ±1

I

I

A or B ports

V

CC

= 5.5 V,

V

I

=

V

CC

or

GND

±20 ±20 ±20

µ

A

I

off

VCC = 0, VI or VO ≤ 4.5 V ±100 ±100 µA

I

CEX

VCC = 5.5 V,
VO = 5.5 V

Outputs high 50 50 50 µA

I

O

‡

VCC = 5.5 V, VO = 2.5 V –50 –100 –180 –50 –180 –50 –180 mA

I

OZH

§

VCC = 5.5 V, VO = 2.7 V 10 10 10 µA

I

OZL

§

VCC = 5.5 V, VO = 0.5 V –10 –10 –10 µA

=

Outputs high 3 3 3

I

CC

A or B ports

V

CC

= 5.5 V,

IO = 0,

Outputs low 36 36 36

mA

VI = VCC or GND

Outputs disabled 3 3 3

∆I

CC

¶

VCC = 5.5 V , One input at 3.4 V,
Other inputs at VCC or GND

50 50 50 µA

C

i

Control inputs VI = 2.5 V or 0.5 V 3 pF
C

io

A or B ports VO = 2.5 V or 0.5 V 9 pF

* On products compliant to MIL-PRF-38535, this parameter does not apply.
†

All typical values are at VCC = 5 V.

‡

Not more than one output should be tested at a time, and the duration of the test should not exceed one second.

§

The parameters I

OZH

and I

OZL

include the input leakage current.

¶

This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND.

PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.

SN54ABT16600, SN74ABT16600

18-BIT UNIVERSAL BUS TRANSCEIVERS

WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

5

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

timing requirements over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted) (see Figure 1)

SN54ABT16600 SN74ABT16600

MIN MAX MIN MAX

UNIT

f

clock

Clock frequency 0 150 0 150 MHz

LEAB or LEBA high 2.5 2.5

twPulse duration

CLKAB or CLKBA high or low 3 3

ns

A before CLKAB↓ or B before CLKBA↓ 3 3

t

su

Setup time

A before LEAB↓ or B before LEBA↓

2.5 2.5

ns
CLKEN before CLK↓ 2.5 2.5
A after CLKAB↓ or B after CLKBA↓ 0 0

t

h

Hold time

A after LEAB↓ or B after LEBA↓

2 2

ns
CLKEN after CLK↓ 1 1

switching characteristics over recommended ranges of supply voltage and operating free-air
temperature, C

L

= 50 pF (unless otherwise noted) (see Figure 1)

PARAMETER

FROM

TO

VCC = 5 V,

TA = 25°C

SN54ABT16600 SN74ABT16600

UNIT

(INPUT)

(OUTPUT)

MIN TYP MAX MIN MAX MIN MAX

f

max

150 150 150 MHz

t

PLH

1.5 2.5 3.6 1.5 4.2 1.5 4

t

PHL

A or B

B or A

1.5 3.2 4.5 1.5 5.1 1.5 4.9

ns

t

PLH

2 3.2 4.5 2 5.6 2 5

t

PHL

LEAB or LEBA

B or A

2 3.4 4.5 2 5.4 2 5

ns

t

PLH

2 3.5 4.7 2 5.4 2 5.3

t

PHL

CLKAB

or

CLKBA

B or A

2 3.5 4.3 2 5.2 2 5

ns

t

PZH

1.5 3.4 4.6 1.5 5.3 1.5 5.1

t

PZL

OEAB

or

OEBA

B or A

2 3.8 4.7 2 5.6 2 5.4

ns

t

PHZ

2 4.5 5.4 2 6.6 2 6.2

t

PLZ

OEAB

or

OEBA

B or A

1.5 3.4 4.7 1.5 5.8 1.5 5.4

ns

PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.

SN54ABT16600, SN74ABT16600
18-BIT UNIVERSAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS

SCBS209B – JUNE 1992 – REVISED JANUARY 1997

6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER MEASUREMENT INFORMATION

1.5 V

t

h

t

su

From Output

Under Test

CL = 50 pF

(see Note A)

LOAD CIRCUIT

S1

7 V

Open

GND

500 Ω

500 Ω

Data Input

Timing Input

1.5 V

3 V

0 V

1.5 V 1.5 V

3 V

0 V

3 V

0 V

1.5 V

t

w

Input

VOLTAGE WAVEFORMS

SETUP AND HOLD TIMES

VOLTAGE WAVEFORMS

PROPAGATION DELAY TIMES

INVERTING AND NONINVERTING OUTPUTS

VOLTAGE WAVEFORMS

PULSE DURATION

t

PLH

t

PHL

t

PHL

t

PLH

V

OH

V

OH

V

OL

V

OL

1.5 V 1.5 V

3 V

0 V

1.5 V1.5 V

Input

1.5 V

Output

Control

Output

Waveform 1

S1 at 7 V

(see Note B)

Output

Waveform 2

S1 at Open

(see Note B)

V

OL

V

OH

t

PZL

t

PZH

t

PLZ

t

PHZ

1.5 V1.5 V

3.5 V

0 V

1.5 V
VOL + 0.3 V

1.5 V

VOH – 0.3 V

≈ 0 V

3 V

VOLTAGE WAVEFORMS

ENABLE AND DISABLE TIMES

LOW- AND HIGH-LEVEL ENABLING

Output

Output

t

PLH/tPHL

t

PLZ/tPZL

t

PHZ/tPZH

Open

7 V

Open

TEST S1

Output

Control

NOTES: A. CL includes probe and jig capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf≤ 2.5 ns.
D. The outputs are measured one at a time with one transition per measurement.

1.5 V

Figure 1. Load Circuit and Voltage Waveforms

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERSTOOD T O
BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  1998, Texas Instruments Incorporated