Datasheet SN54AS640J, SN54ALS640BJ, SNJ54AS640FK, SNJ54AS640J Datasheet (Texas Instruments)
Page 1
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
OPERATION
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUARY 1995
• Bidirectional Bus Transceivers in
High-Density 20-Pin Packages
• Inverting Logic
• Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK), and Standard Plastic (N)
and Ceramic (J) 300-mil DIPs
description
These octal bus transceivers are designed for
asynchronous two-way communication between
data buses. These devices transmit data from the
A bus to the B bus or from the B bus to the A bus,
depending upon the level at the direction-control
(DIR) input. The output-enable (OE
used to disable the device so that the buses are
effectively isolated.
The -1 version of the SN74ALS640B is identical to
the standard version, except that the
recommended maximum I
OL
increased to 48 mA. There is no -1 version of the
SN54ALS640B.
The SN54ALS640B and SN54AS640 are
characterized for operation over the full military
temperature range of –55°C to 125°C. The
SN74ALS640B and SN74AS640 are
characterized for operation from 0°C to 70°C.
) input can be
for the -1 version is
SN54ALS640B, SN54AS640 ...J PACKAGE
SN74ALS640B, SN74AS640 . . . DW OR N PACKAGE
SN54ALS640B, SN54AS640 . . . FK PACKAGE
A3
A4
A5
A6
A7
(TOP VIEW)
1
DIR
2
A1
3
A2
4
A3
5
A4
6
A5
7
A6
8
A7
9
A8
10
GND
(TOP VIEW)
A2A1DIR
3212019
4
5
6
7
8
9
10 11 12 13
A8
B8
20
19
18
17
16
15
14
13
12
11
V
CC
B7
OE
18
17
16
15
14
B6
V
OE
B1
B2
B3
B4
B5
B6
B7
B8
CC
B1
B2
B3
B4
B5
GND
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
FUNCTION TABLE
INPUTS
OE DIR
L L B data to A bus
L HA data to B bus
H X Isolation
Copyright 1995, Texas Instruments Incorporated
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
1
Page 2
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
UNIT
IOLLow-level output current
mA
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUAR Y 1995
19
1
2
3
4
5
6
7
8
9
†
G3
3 EN1 [BA]
3 EN2 [AB]
1
logic diagram (positive logic)
19
OE
18
B1
2
17
16
15
14
13
12
11
B2
B3
B4
B5
B6
B7
B8
DIR
A1
1
182
B1
To Seven Other Transceivers
logic symbol
OE
DIR
A1
A2
A3
A4
A5
A6
A7
A8
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Input voltage, V
Operating free-air temperature range, T
Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
: All inputs 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
I/O ports 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
: SN54ALS640B –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . .
A
SN74ALS640B 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
‡
recommended operating conditions
V
CC
V
IH
V
IL
I
OH
T
A
§
Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V
Supply voltage 4.5 5 5.5 4.5 5 5.5 V
High-level input voltage 2 2 V
Low-level input voltage 0.7 0.8 V
High-level output current –12 –15 mA
p
Operating free-air temperature –55 125 0 70 °C
SN54ALS640B SN74ALS640B
MIN NOM MAX MIN NOM MAX
12 24
48
§
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 3
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
PARAMETER
TEST CONDITIONS
UNIT
V
V
I
V
V
mA
I
V
V
V
A
I
V
V
V
mA
A or B
B
A
ns
OE
A
B
ns
OE
A
B
ns
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUARY 1995
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54ALS640B SN74ALS640B
MIN TYP†MAX MIN TYP†MAX
V
IK
OH
V
OL
I
IH
IL
I
O
I
CC
†
All typical values are at VCC = 5 V, TA = 25°C.
‡
Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V
§
For I/O ports, the parameters IIH and IIL include the off-state output current.
¶
The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
Control inputs
A or B ports
Control inputs
A or B ports
Control inputs
A or B ports
¶
VCC = 4.5 V, II = –18 mA –1.5 –1.5 V
VCC = 4.5 V to 5.5 V, IOH = –0.4 mA VCC –2 VCC –2
IOH = –3 mA 2.4 3.2 2.4 3.2
VCC = 4.5 V
VCC = 4.5 V
= 5.5
CC
= 5.5 V,
§
§
CC
= 5.5 V,
CC
VCC = 5.5 V, VO = 2.25 V –20 –112 –30 –112 mA
VCC = 5.5 V
IOH = –12 mA 2
IOH = –15 mA 2
IOL = 12 mA 0.25 0.4 0.25 0.4
IOL = 24 mA 0.35 0.5
IOL = 48 mA
VI = 7 V 0.1 0.1
VI = 5.5 V 0.1 0.1
= 2.7
I
= 0.4
I
Outputs high 19 50 19 45
Outputs low 27 60 27 55
Outputs disabled 28 55 28 50
‡
20 20
20 20
–0.1 –0.1
–0.1 –0.1
0.35 0.5
V
µ
mA
switching characteristics (see Figure 1)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
PARAMETER
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
#
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
PLZ
FROM
(INPUT)
TO
(OUTPUT)
or
or
or
R1 = 500 Ω
R2 = 500 Ω,
TA = MIN to MAX
SN54ALS640B SN74ALS640B
MIN MAX MIN MAX
2 14 2 11
2 13 2 10
4 25 4 21
5 27 5 24
2 12 2 10
3 20 3 15
,
#
UNIT
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
Page 4
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
UNIT
PARAMETER
TEST CONDITIONS
UNIT
VOLV
V
V
I
V
V
mA
I
V
V
V
A
I
V
V
V
mA
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUAR Y 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Input voltage, V
7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
: All inputs 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
†
I/O ports 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, T
: SN54AS640 –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
SN74AS640 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
SN54AS640 SN74AS640
MIN NOM MAX MIN NOM MAX
V
V
V
I
I
T
CC
IH
IL
OH
OL
A
Supply voltage 4.5 5 5.5 4.5 5 5.5 V
High-level input voltage 2 2 V
Low-level input voltage 0.8 0.8 V
High-level output current –12 –15 mA
Low-level output current 48 64 mA
Operating free-air temperature –55 125 0 70 °C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54AS640 SN74AS640
MIN TYP‡MAX MIN TYP‡MAX
V
IK
V
OH
I
IH
IL
I
O
I
CC
‡
All typical values are at VCC = 5 V, TA = 25°C.
§
For I/O ports, the parameters IIH and IIL include the off-state output current.
¶
The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
Control inputs
A or B ports
Control inputs
A or B ports
Control inputs
A or B ports
¶
VCC = 4.5 V, II = –18 mA –1.2 –1.2 V
VCC = 4.5 V, IOH = –2 mA VCC –2
VCC = 4.5 V to 5.5 V, IOH = –2 mA VCC –2
IOH = –3 mA 2.4 3.2 2.4 3.2
VCC = 4.5 V
= 4.5
CC
= 5.5
CC
= 5.5 V,
§
§
CC
= 5.5 V,
CC
VCC = 5.5 V, VO = 2.25 V –50 –150 –50 –150 mA
VCC = 5.5 V
IOH = –12 mA 2.4
IOH = –15 mA 2.4
IOL = 48 mA 0.3 0.55
IOL = 64 mA 0.35 0.55
VI = 7 V 0.1 0.1
VI = 5.5 V 0.1 0.1
= 2.7
I
= 0.4
I
Outputs high 37 58 37 58
Outputs low 78 123 78 123
Outputs disabled 51 80 51 80
20 20
70 70
–0.5 –0.5
–0.75 –0.75
V
µ
mA
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 5
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
A or B
B
A
ns
OE
A
B
ns
OE
A
B
ns
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUARY 1995
switching characteristics (see Figure 1)
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
PARAMETER
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
†
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
PLZ
FROM
(INPUT)
TO
(OUTPUT)
or
or
or
R1 = 500 Ω
R2 = 500 Ω,
TA = MIN to MAX
SN54AS640 SN74AS640
MIN MAX MIN MAX
1 8 2 7
1 7 2 6
2 10 2 8
2 12 2 10
2 9 2 8
2 16 2 13
,
†
UNIT
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
Page 6
SN54ALS640B, SN54AS640, SN74ALS640B, SN74AS640
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SDAS122A – DECEMBER 1983 – REVISED JANUAR Y 1995
PARAMETER MEASUREMENT INFORMATION
SERIES 54ALS/74ALS AND 54AS/74AS DEVICES
V
CC
R
L
From Output
Under Test
(see Note A)
C
L
Test
Point
R
L
From Output
Under Test
(see Note A)
Test
Point
C
L
From Output
Under Test
(see Note A)
7 V
RL = R1 = R2
S1
R1
C
L
Test
Point
R2
LOAD CIRCUIT FOR
BI-STATE
TOTEM-POLE OUTPUTS
Timing
Input
t
su
Data
Input
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
Output
Control
(low-level
enabling)
Waveform 1
S1 Closed
(see Note B)
Waveform 2
S1 Open
(see Note B)
t
PZL
t
PZH
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
VOLTAGE WAVEFORMS
1.3 V
t
PHZ
1.3 V
1.3 V
t
1.3 V1.3 V
1.3 V1.3 V
FOR OPEN-COLLECTOR OUTPUTS
h
t
PLZ
LOAD CIRCUIT
3.5 V
0.3 V
3.5 V
0.3 V
3.5 V
0.3 V
[
3.5 V
V
OL
0.3 V
V
OH
0.3 V
[
0 V
High-Level
Low-Level
Out-of-Phase
(see Note C)
Pulse
Pulse
Input
In-Phase
Output
Output
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
1.3 V 1.3 V
t
w
1.3 V 1.3 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
1.3 V 1.3 V
t
PLH
t
PHL
1.3 V 1.3 V
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
1.3 V1.3 V
t
PHL
t
PLH
3.5 V
0.3 V
3.5 V
0.3 V
3.5 V
0.3 V
V
V
V
V
OH
OL
OH
OL
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. When measuring propagation delay items of 3-state outputs, switch S1 is open.
D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%.
E. The outputs are measured one at a time with one transition per measurement.
Figure 1. Load Circuits and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 7
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
Loading...