Datasheet SL311D, SL311N Datasheet (SLS)

Semiconductor

High Performance Voltage Comparators

LOGIC DIAGRAM

SL311

ORDERING INFORMATION

SL311N Plastic

Input polarity is reversed when GND pin is used as an output.

SL311D SOIC

TA = -45°C to 85°C for

all packages

PIN ASSIGNMENT

MAXIMUM RATINGS

Symbol Parameter Value Unit

V

+ VEE Total Supply Voltage 36 V

CC

VO - VEE Output to Negative Supply Voltage 40 V

VEE Ground to Negative Supply Voltage 30 V
VID Input Differential Voltage ± 30 V
VIN Input Voltage (Note) ± 15 V

- Voltage at Strobe Pin VCC to VCC - 5 V

P

D

1/θJA

T

Operating Junction Temperature +150 °C

J(max)

Tstg Storage Temperature Range -60 to +150 °C

Note: This rating applies for ±15 volt supplies. The positive input voltage limit is 30 volts above the negative

supply. The negative input voltage limit is equal to the negative supply voltage or 30 volts below the
positive supply, whichever is less.

Power Dissipation and Thermal Characteristics
Plastic Dual In-Line Packages
Derate above TA =+25°C

625

5.0

mW

mW/°C

System Logic

SLS

SL311

Semiconductor

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Min Max Unit

V

+ VEE Total Supply Voltage 30 V

CC

TA Operating Temperature, All Package Types - 45 +85 °C

ELECTRICAL CHARACTERISTICS (V

[Note 1])

Symbol Parameter Test Conditions Guaranteed Limits Unit

Min Max

VIO Input Offset Voltage

(Note 2)

IIO Input Offset Current

(Note 2)

IIB Input Bias Current TA = +25°C

AV Voltage Gain 150000

t

Propagation Delay Time 300 ns

DLH

VDS Saturation Voltage TA = +25°C

VIR Input Voltage Range -14.5 13.0 V

ICC Positive Supply Current +7.5 mA
IEE Negative Supply Current -5.0 mA

NOTES:

1. Offset voltage, offset current and bias current specifications apply for a supply voltage range from a single

5.0 volt supply up to ±15 volt supplies.

2. The of fset voltages and offset currents given are the maximum values required to drive the output within a volt
of either supply with a 1.0 mA load. Thus, these parameters define an error band and take into account the
“worst case” effects of voltage gain and input impedance.

RS ≤ 50 kΩ, TA = +25°C
RS ≤ 50 kΩ, -45°C ≤ TA ≤ 85°C

TA = +25°C

-45°C ≤ TA ≤ 85°C

TA = -45°C
TA = +85°C

VID ≤ -10 mV, IO=50 mA

=+15 V, VEE= -15 V, TA =+25°C unless otherwise noted

CC

7.5
10

50

100

250

375
500

1.5 V

mV

nA

nA

SLS

System Logic