Datasheet SII SK63102 Datasheet (Lattice Semiconductor)

Download

Page 1

Quick Start Guide – OEM Installation

SiI-SK63101 and SiI-SK63102

Quick Start Guide – OEM Installation

Page 2

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

May 2012

Copyright ©2012 Silicon Image, Inc. All rights reserved. The contents of these materials contain proprietary and confidential information (including trade secrets, copyright, and other Intellectual Property interests) of Silicon Image, Inc. or its affiliates. All rights are reserved and contents, (in whole or in part) may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior written permission of Silicon Image, Inc. or its affiliates. You may not use these materials except only for your bona fide non-commercial evaluation of your potential purchase of products and/or services from Silicon Image or its affiliates; and only in connection with your purchase of products or services from Silicon Image or its affiliates, and only in accordance with the terms and conditions stipulated. Copyright infringement is a violation of federal law subject to criminal and civil penalties. You have no right to copy, modify, transfer, sublicense, publicly display, create derivative works of, distribute these materials, or otherwise make these materials available, in whole or in part, to any third party.

Patents

The subject matter described herein may contain one or more inventions claimed in patents or patents pending owned by Silicon Image, Inc. or its affiliates.

Trademark Acknowledgment

Silicon Image®, the Silicon Image logo, SteelVine®, Simplay®, Simplay HD®, the Simplay HD logo, Satalink®, InstaPort®, the InstaPort Logo, and TMDS® are trademarks or registered trademarks of Silicon Image, Inc. in the United States or other countries. HDMI® and the HDMI logo with High-Definition Multimedia Interface are trademarks or registered trademarks of, and are used under license from, HDMI Licensing, LLC. in the United States or other countries. MHL® and the MHL Logo are trademarks or registered trademarks of, and are used under license from, MHL, LLC. in the United States or other countries. All other trademarks and registered trademarks are the property of their respective owners in the United States or other countries. The absence of a trademark symbol does not constitute a waiver of Silicon Image’s trademark or other intellectual property rights with regard to a product name, logo or slogan.

Export Controlled Document

This document contains information subject to the Export Administration Regulations (EAR) and has a classification of EAR99 or is controlled for Anti-Terrorism (AT) purposes. Transfer of this information by any means to an EAR Country Group E:1 or foreign national thereof (whether in the U.S. or abroad) may require an export license or other approval from the U.S. Department of Commerce. For more information, contact the Silicon Image Director of Global Trade Compliance.

Further Information

To request other materials, documentation, and information, contact your local Silicon Image, Inc. sales office or visit the Silicon Image, Inc. web site at www.siliconimage.com.

Revision History

Revision Date Comment

0.80

05/2012 Preliminary release.

CONFIDENTIAL

Page 3

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Table of Contents

Getting Started .............................................................................................................................................................. 2

SiI-SK63101 SiI-SK63102 module pair description. ................................................................................................... 3

WirelessHD module/Adapter Connection Diagram. .................................................................................................... 4

SiI-SK63101 & SiI-SK63102 Specifications: ................................................................................................................. 5

Interference Statement ................................................................................................................................................... 6

USA-Federal Communications Commission (FCC) .................................................................................................... 6

Note for system integrators .................................................................................................................................... 6

Label of the end product: ....................................................................................................................................... 6

Canada – Industry Canada (IC) .................................................................................................................................. 6

Note for System Integrators.................................................................................................................................... 7

Label of the end product: ....................................................................................................................................... 7

Europe - EU Declaration of Conformity and Restrictions............................................................................................ 7

CE RF Radiation Exposure Statement: ................................................................................................................... 8

Note for system integrators: ................................................................................................................................... 8

Marking/Labelling information ...................................................................................................................................... 9

Proposed Label and Location for SiI-SK63101 Receiver module ................................................................................ 9

Proposed Label and Location for Host Device installing SiI-SK63101 Receiver module ............................................. 9

Proposed Label and Location for SiI-SK63102 Transmitter module .......................................................................... 10

Proposed Label and Location for Host Device installing SiI-SK63102 Transmitter module ....................................... 10

References: ................................................................................................................................................................. 11

Standards Documents .............................................................................................................................................. 11

CONFIDENTIAL

Page 4

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

List of Figures

Figure 1. SiI-SK63101 SiI-SK63102 module pair with supporting IO boards for testing ................................................. 3

Figure 2. SiI-SK63101 SiI-SK63102 module pair test setup ........................................................................................... 4

List of Tables

Table 1. Transmitter and Receiver specifications........................................................................................................... 5

Table 2. Referenced Documents................................................................................................................................... 11

CONFIDENTIAL

Page 5

Page 6

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Getting Started

Follow the procedures described in this section to setup the SiI-SK63101 and SiI-63102 module pair:

1. Unpack the module pair.

2. Place the HDMI Video source and the HDMI video display in the same room at a reasonable distance apart (2 to 10m).

3. Connect the provided HDMI cable between the Tramsitter and the HDMI source output.

4. Connect the other provided HDMI cable between the Receiver and the HDMI display input.

5. Connect the AC/DC adapters to the Transmitter and Receiver.

6. You should see that the Status LED on the front of both the Transmitter and the Receiver are blinking.

7. Power up and configure the HDMI source and the HDMI Display such that they are sending and receiving video respectively.

8. Ensure that the HDMI display is tuned to the the source input where the HDMI cable from the Receiver is plugged in.

9. At this time the Display should render the video coming from the HDMI source and both Status LED on the adapters should be ON.

CONFIDENTIAL

Page 7

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

SiI-SK63101 SiI-SK63102 module pair description.

Figure 2 shows the SiI-SK63101 and SiI-SK63102 modules along with the supporting IO board as part of the complete evaluation kit:

Figure 1. SiI-SK63101 SiI-SK63102 module pair with supporting IO boards for testing

CONFIDENTIAL

Page 8

SiI-63101 and SiI63102 Quick Start Guide – OEM Installation

WirelessHD module/Adapter Connection Diagram.

Figure 2 shows the basic setup using a WirelessHD link.

Silicon Image, Inc.

Figure 2. SiI-SK63101 SiI-SK63102 module pair test setup

CONFIDENTIAL

Page 9

Quick Start Guide – OEM Installation

Silicon Image, Inc.

SiI-SK63101 & SiI-SK63102 Specifications:

Table 1. Transmitter and Receiver specifications

Parameter Value Notes

Mechanical

Dimensions (in mm) X = 82, Y= 40, Z = 30 Each sides Operating temperature: 0C - 40C HDMI Receptacle Type A DC 3.3V Plug 2.5mm

Electrical

Power Input VIN 3.3V DC, 2A Max input Voltage ripple <10% of VIN peak to peak Max power 2.5W (Max) Connected Power 2.0W (Typical)

Sleep/Wake Power 100mW (Typical)

Radio Frequencies

HRP Channel Index Support Channel 2, 3 Frequency range HRP 59.40 Ghz – 63.56 Ghz HRP Bandwidth 1.76 Ghz per channel LRP Channel Index Support Channel 1, 2, 3, 4. 5 per HRP channel LRP Bandwidth 92 MHz per channel Receiver Sensitivity -72 dBm (Typical) Noise Figure 10 dB (Typical) Line of Sight (LOS) Link Margin 6 dB at 10m 1080p/60Hz 4:4:4 with SPER <0.01

Compliance and Regulation

WirelessHD1.1 Compliant HDMI 1.4a Compliant CEC Compatible

With 1080p60Hz Video @

10m

SiI-63101 and SiI63102

CONFIDENTIAL

Page 10

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Interference Statement

USA-Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2. This product does not contain any user serviceable components. Any unauthorized product changes or modifications

will invalidate warranty and all applicable regulatory certifications and approvals.

3. Caution: Exposure to Radio Frequency Radiation: The installer of this radio equipment must ensure that a minimum

distance of 20cm shall be maintained between the antenna and the users of the host that this module is integrated into.

4. Caution: User is cautioned that changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

5. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or

transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. If the module is installed with other transmitting devices which can transmit simultaneously with this device and antenna-toantenna distance is less than 20cm, assessing RF exposure compliance with multiple transmitters within a host device shall be performed based upon FCC requirements.

Note for system integrators

This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Label of the end product:

For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains FCC ID: UK2-SII-SK63101 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

For SII-SK63102 module: The final end product must be labeled in a visible area with the following "Contains FCC ID: UK2-SII-SK63102 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.”

CONFIDENTIAL

Page 11

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.

Caution: Exposure to Radio Frequency Radiation.

The installer of this radio equipment must ensure that the minimum distance of 20cm between the antenna and the user shall be maintained such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hcsc.gc.ca/rpb.

Se pour conformer aux conditions d'exposition de RF toutes les antennes devraient être localisées à une distance minimum de 20 cm du corps de toutes les personnes.

Note for System Integrators

This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Label of the end product:

For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains IC: 6705A-SIISK63101 ".

For SII-SK63102 module: The final end product must be labeled in a visible area with the following "Contains IC: 6705A-SIISK63102 ".

Europe - EU Declaration of Conformity and Restrictions

This equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC.

This equipment is marked with the symbol.

This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications: EN 301 567 v1.1.1: Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive. EN 301 489-28 v1.1.1, EN 301 489-1 v 1.9.2: Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links.

EN 60950-1: Safety of Information Technology Equipment. EN 62311: 2008: Assessment of electronic and electrical equipment related to human exposure restrictions for

electromagnetic fields (0 Hz - 300 GHz)

CONFIDENTIAL

Page 12

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Marking by the symbol indicates that usage restrictions apply.

CE RF Radiation Exposure Statement:

Caution This equipment complies with European RF radiation exposure limits and is meant to be used as an Indoor

device. The installer of this radio equipment must ensure that the minimum distance of 20cm shall be maintained between the antenna and the users of the host that this module is integrated into. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Following is a list of countries available for CE mark one-stop notification relating to this equipment: Belgium, Bulgaria, Croatia, Cyprus, Germany, Hungary, Iceland, Macedonia, Montenegro, Norway, Romania, Slovakia, Spain, Switzerland and United Kingdom.

This device is restricted for use in the following countries:

Denmark, Estonia, Finland, Latvia, Malta, Serbia and Slovenia.

Note for system integrators:

- The module is tested to comply with the requirement of the R&TTE Directive. System integrators are responsible for compliance of the final device with the R&TTE Directive.

- Packaging: CE Marking must also be on the outer packaging of the product. The outer packaging must also provide an indication as to where the device is intended to be used and/or conversely, where there may be restrictions for use.

CONFIDENTIAL

Page 13

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Marking/Labelling information

Proposed Label and Location for SiI-SK63101 Receiver module

SILICON IMAGE

Label

Model: SII-SK63101 FCC: UK2-SII-SK63101 IC: 6705A- SIISK63101

Front of Module

Proposed Label and Location for Host Device installing SiI-SK63101 Receiver module

This device contains Model: SII-SK63101 FCC: UK2-SII-SK63101 IC: 6705A- SIISK63101

CONFIDENTIAL

Page 14

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Proposed Label and Location for SiI-SK63102 Transmitter module

SILICON IMAGE

Label

Model: SII-SK63102 FCC: UK2-SII-SK63102 IC: 6705A- SIISK63102

Front of Module

Proposed Label and Location for Host Device installing SiI-SK63102 Transmitter module

This device contains Model: SII-SK63102 FCC: UK2-SII-SK63102 IC: 6705A- SIISK63102

CONFIDENTIAL

Page 15

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

References:

Standards Documents

Table 2 lists the abbreviations used in this document. Contact the responsible standards groups listed in Error! Reference source not found. for more information on these specifications.

Table 2. Referenced Documents

Abbreviation Standards publication, organization, and date

WiHD WirelessHD Specification, Version 1.1, WirelessHD, LLC, May 2010 HDMI High Definition Multimedia Interface, Revision 1.4a, HDMI Consortium, March 2010 HCTS HDMI Compliance Test Specification, Revision 1.4a, HDMI Consortium, March 2010 HDCP High-bandwidth Digital Content Protection, Revision 1.4, Digital Content Protection, LLC; July 2009 DVI Digital Visual Interface, Revision 1.0, Digital Display Working Group, April 1999 E-EDID Enhanced Extended Display Identification Data Standard, Release A Revision 1, VESA; Feb. 2000 CEA-861-D A DMONITOR Profile For Uncompressed High Speed Digital Interfaces, EIA/CEA, July 2006 EDDC Enhanced Display Data Channel Standard, Version 1, VESA, September 1999

CONFIDENTIAL

Page 16

SiI-63101 and SiI63102

Quick Start Guide – OEM Installation

Silicon Image, Inc.

Disclaimers

These materials are provided on an “AS IS” basis. Silicon Image, Inc. and its affiliates disclaim all representations and warranties (express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes. Silicon Image, Inc. and its affiliates assume no liability or responsibility for any errors or omissions in these materials, makes no commitment or warranty to correct any such errors or omissions or update or keep current the information contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or interpretation of, or actions taken or not taken based on the content of these materials.

Silicon Image, Inc. and its affiliates reserve the right, without notice, to periodically modify the information in these materials, and to add to, delete, and/or change any of this information.

Notwithstanding the foregoing, these materials shall not, in the absence of authorization under U.S. and local law and regulations, as required, be used by or exported or re-exported to (i) any U.S. sanctioned or embargoed country, or to nationals or residents of such countries; or (ii) any person, entity, organization or other party identified on the U.S. Department of Commerce's Denied Persons or Entity List, the U.S. Department of Treasury's Specially Designated Nationals or Blocked Persons List, or the Department of State's Debarred Parties List, as published and revised from time to time; (iii) any party engaged in nuclear, chemical/biological weapons or missile proliferation activities; or (iv) any party for use in the design, development, or production of rocket systems or unmanned air vehicles.

Products and Services

The products and services described in these materials, and any other information, services, designs, know-how and/or products provided by Silicon Image, Inc. and/or its affiliates are provided on as “AS IS” basis, except to the extent that Silicon Image, Inc. and/or its affiliates provides an applicable written limited warranty in its standard form license agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in which case such limited warranty shall apply and shall govern in lieu of all other warranties (express, statutory, or implied). EXCEPT FOR SUCH LIMITED WARRANTY, SILICON IMAGE, INC. AND ITS AFFILIATES DISCLAIM ALL REPRESENTATIONS AND WARRANTIES (EXPRESS, IMPLIED, STATUTORY OR OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS PROVIDED BY SILICON IMAGE, INC. AND/OR ITS AFFILIATES, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED, TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE, MALFUNCTION, OR ANY INACCURACY OF THESE ITEMS CARRIES A RISK OF DEATH OR SERIOUS BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION, EMERGENCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR DEGREE OF POTENTIAL HAZARD. NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOWHOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS.

1140 E. Arques Avenue

Sunnyvale, CA 94085

T 408.616.4000 F 408.830.9530

www.siliconimage.com

CONFIDENTIAL

Datasheet SII SK63102 Datasheet (Lattice Semiconductor)

Specifications and Main Features

Frequently Asked Questions

User Manual