Datasheet SC [Radial] 2009 Full Datasheet

LLiisstt ooff tthhee PPrroodduuccttss

Series Type Feature Operation

Temperature
Range

GSR Radia General purpose

GSA Axia General purpose

KM Radia High Temperature

SM Radia 7mm, standard
SK Radia 7mm, high

temperature

LL Radia Low leakage current

GL Radia Low lmpedance &

-40 to +85℃

-25 to +85℃

-40 to +85℃

-40 to +85℃

-40 to +105℃

-25 to +105℃

-40 to +85℃

-40 to +105℃

-40 to +85℃

-40 to +105℃

Working
Voltage

6.3~100V
160~450V

6.3~100V
160~450V

6.3~100V
160~450V
4~50V 0.1~470uF 0.01CV or 3uA 1000
4~63V 0.1~470uF 0.01CV or 3uA 1000

10~63V 0.1~1000uF 0.002CV or

6.3~63V 4.7~4700uF 0.01CV or 2uA 2000~

Capacitance Leakage Current

1≦(uA)

0.1~15000uF

0.47~470uF

0.1~15000uF

0.47~470uF

0.1~15000uF

0.47~220uF

0.01CV or 3uA

0.03uA

0.01CV or 3uA

0.03uA

0.01CV or 3uA

0.03CV or 3uA

0.4uA

Load
Life
Hrs
2000

2000

2000

2000

LOW ESR

NP Sadia Non-Polarized

LP Snap-in Snap-in Terminal

HP Snap-in Snap-in Terminal

High T emperature
taping
SMD STG General Purpose,

85℃
SMD STK General Purpose,

105℃
SMD STR Low Impedance

&ESR

-40 to +85℃

-20 to +85℃

-40 to +85℃

-25 to +85℃

-40 to +105℃

-25 to +105℃

-40 to +85℃

-40 to +105℃

-40 to +105℃

3000
10~100V
160~250V
10~100V
160~450V
10~100V
160~450V

4~450V

4~450V 0.1~4700uF 1000~

6.3~50V 1.0~1500uF 0.01CV or 3uA

0.47~1000uF 0.03CV or 3uA 2000

470~68000uF
47~2700uF
330~68000uF
33~2200uF

0.1~4700uF 2000

0.03CV or 3uA 2000

0.03CV or 3uA 2000

2000

AApppplliiccaattiioonn NNootteess

When you use aluminum electrolytic capacitors, remember the follow:

1. Polarity

Regular electrolytic Capacitor has polarity. Reverse voltage causes short circuit breakage of the capacitor
or leakage of electrolyte. Where the polarity in a circuit sometimes reversed or unknown, a bi-polar
capacitor should be used.

2. Over voltage

Do not apply over voltage continuously. When over voltage is applied to the capacitor, leakage current
increase drastically. Applied working voltage to capacitors should not exceed the rated working voltage of
capacitor.

3. Operating temperature and life

Do not use the capacitor over the max operating temperature. Life time of the capacitor depends on the
temperature. Generally, life time is doubled by decreasing each temperature 10.

4. Vent

It is recommended at least 3 mm of space around the vent. If such space is not provided, the vent will not
operate completely.

5. Ripple current

Do not apply a ripple current exceeding the rated maximum ripple current. Apply too much ripple current
to the capacitor causes great heat generation, invites deterioration of properties of causes breakage.

6. Charge and discharging

Frequent and quick change/discharge generates heat inside the capacitor, causing increase of leakage current,
decrease of capacitance, or breakage occasionally.

7. Storage

When the capacitor is stored for a long time without applying voltage, leakage current tends to increase.
This returns to normal by applying the rated voltage to the capacitor before use.

8. Soldering

Improper soldering may shrink or break the insulating sleeve and /or damage the internal element as
terminals and lead wires conduct heat into the capacitor. Avoid too high a soldering temperature and/or
too long a soldering time.

9. Mechanical stress on the lead wire and the terminal.

Do not apply excessive force to the lead wire and the terminal. Do not move the capacitor after soldering

to the PC board, not carry the PC board by picking up the capacitor. For their strength, refer to JIS C-5141
and C-5102.

10. Warning for cleaning solvent

Aluminum electrolytic capacitors may be damaged by corrosion hydrocarbon solvents. The followings are
some examples for safe and unsafe cleaning solvents. Please let us know in advance solvent name and
conditions for your PCB cleaning.

safe cleaning unsafe cleaning
Xylence 1.1.2-Trichloro-1.2
Ethyl alcohol Carbon tetrachloride
Butyl alcohol chloroform
Methyl alcohol Trichloroethane
Proy1 alcohol Trichloroethylene
Calgonito (detergent) Methylene chloride

11. Sleeve material

The standard sleve material is polyvinyl-chloride. If exposed to xylene, toluene, ect, and then subjected to
high heat, the sleeve may crack. This sleeve is not insulating material.

12. Fcon’s Products meet or exceed quality standards specified by JIS-C-5141W and with the reliability

requirements refer to JIS-C-5102.

13. None of ozone depleting chemicals (ODC) under the Montreal Protocol is used in manufacturing process of

Fcon Electronic Industrial CO., Ltd.

GGSSRR SSeerriieess GGeenneerraall PPuurrppoossee

Feature

zWide CV value range.
zLoad life 2000hrs at 85℃

zSafety vent construction design.
zFor detail specifications, please refer to Engineering Bulletin No. E101

Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +85℃ -25 to +85℃
Rated voltage Range 6.3 to 100VDC 160 to 450 VDC
Capacitance Range 0.1 to 15000uF 0.47 to 470uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃, max) I ≦0.01CV or 3(uA) After 1 minutes

whichever is greater measured with rated
working voltage applied.

Dissipation Factor (tan δ)

Low T emperature Characteristics
(120Hz)

Load Life Test conditions

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
D.F. (%) max 24 20 16 14 12 10 9 8

Working Voltage (VDC) 160 200 250 350 400 450

D.F. (%) max 16 18 18 20 20 22
For capacitance> 1000uF, add 2% per another 1000Uf. (+20℃, at 120Hz)
Impedance radio max.

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100

Z-25℃/ Z+20℃ 4 3 2 2 2 2 2 2

Z-40℃/Z+20℃ 8 6 4 4 3 3 3 3

Working Voltage(VDC) 160 200 250 350 400 450

Z-25℃/ Z+20℃ 2 2 3 5 15 15

For Capacitance Value 1000uF, Add 0.5 per another 1000uF for -25℃/+20℃
Add 1 per another 1000uF for -40℃/+20℃

Duration time :2000Hrs

Ambient temperature :+85℃

Applied voltage Rated DC working voltage

After test requirements at +20℃

Capacitance change ≦±20% of the initial measured value

Dissipation factor ≦150% of the initial specified value

I ≦0.01CV or 3(uA) After 1 minute
with rate working voltage applied

Shelf Life

Multiplier for ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature
CAP (uF) / Hz 50(60) 120 400 1K 10K 50K-100K
Multiplier Cap≦10

10<CAP≦100
100<CAP≦1000

1000<CAP

0.8 1 1.30 1.30 1.65 1.70 Temperature ℃ 45 60 70 85

0.8 1 1.23 1.23 1.48 1.53 Multiplier 1.8 1.50 1.30 1.0

0.8 1 1.16 1.16 1.35 1.38

0.8 1 1.11 1.11 1.25 1.28

Test conditions
Duration time: 500Hrs
Ambient temperature: +85℃

Applied voltage: None

After test requirements at +20℃: Same limits as Load life. Pre-treatment for
measurements shall be conducted after application of DC working voltage for 30 minuts

Diagram of Dimensions:( Unit:mm)

Case Size

WV(SV)

uF

0.1

0.22

0.33

0.47
1

2.2

3.3

4.7

10

22

33

47

100

220

330

470

1000

2200

3300

4700

6800

10000

15000

6.3
(8)

5x11 5x11 5x11 - - - - - ­ 5x11 5x11 5x11 - - - - - ­ 5x11 5x11 5x11 - - - - - ­ 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 6.3x11
5x11 5x11 5x11 5x11 6.3x11 6.3x11 6.3x11 8x11.5 8x11.5
5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x12.5 10x12.5

5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 10x12.5

5x11 5x11 5x11 5x11 5x11

5x11 5x11 5x11 5x11 5x11 6.3x11

5x11 5x11 5x11 5x11 5x11

5x11 5x11 5x11 5x11 5x11

5x11 5x11 5x11 5x11

5x11 5x11
5x11

6.3x11

6.3x11

6.3x11
8x11.5

8x11.5 10x12.5 10x16 10x20 13x20

10x20 10x20 13x20 13x25
10x20

13x20
13x20
13x25

16x25 16x25 16x31.5 18x35.5 - - - - -

16x25
16x31.5
16x35.5
18x35.5

10

(13)

6.3x11

6.3x11
8x11.5

8x11.5 8x11.5 10x12.5

13x20 13x25

13x25 16x25 16x31.5 18x35.5 22x41 - - -

16x35.5
18x35.5

16

(20)

5x11

6.3x11

6.3x11
8x11.5

8x11.5 10x12.5

18x35
18x41

6.3x11

8x11.5 10x12.5

16x25

16x31.5

D Ø 5 6.3 8 10 13 16 18 22

F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10

d Ø 0.5 0.6 0.8

25

(32)

- - - - - -

35

(44)

5x11

6.3x11

6.3x11
8x11.5

10x12.5

10x16
10x16
10x20

16x25

16x31.5
16x35.5 18x35.5 22x41 - -

50

(63)

5x11

6.3x11

6.3x11

8x11.5 8x11.5 10x20

10x12.5

10x16
10x16
10x20

13x20
13x25

16x25

16x35.5

63

(79)

5x11

6.3x11

6.3x11
8x11.5

6.3x11
8x11.5

10x16
10x20
10x20
13x20
13x20
13x25
16x25

16x31.5

18x35
18x41

100

(125)

6.3x11
8x11.5

8x11.5
10x12.5
10x12.5

10x16

13x25
16x25
13x25
16x25
16x25

16x31.5

18x41 -

- -

160

(200)

6.3x11
8x11.5

8x11.5

10x12.5

10x16 10x20 10x20 13x25 16x25

10x20 13x20

13x20
13x25

16x25

16x35.5 18x38.5

18x31.5

18x35

200

(250)

8x11.5

10x12.5

10x16

13x20
13x25

16x25

18x35.5 - - - -

18x41 - - - -

250

(300)

10x12.

5

10x16 10x20 13x20

13x20
13x25

13x25

16x31.

5

- - - - -

- - - - -

- - - - -

- - - - -

- - - - -

- - - - -

350

(400)

10x12.5

10x16

16x25 16x25 16x35.5

16x31.5 16x31.5 16x35.5

18x14 - -

- - - -

400

(450)

10x12.5

10x16

10x16 10x20

450

(500)

10x16
10x20

13x20
13x25
16x25

16x31.5

Maximum Ripple Current

WV(SV)

uF

0.1

0.22

0.33

0.47
1

2.2

3.3

4.7

10

22

33

47

100

220

330

470

1000

2200

3300

4700
6800

10000

15000

6.3
(8)

8 8 10 - - - - - ­ 8 8 10 - - - - - ­ 8 8 10 - - - - - ­ 11 11 12 12 12 12 15 15 15
17 17 22 17 17 17 22 22 22
25 28 33 33 33 36 39 39 39

35 35 40 36 36 43 53

31 40 42 45 48

60 60 60 65 70 80

70 75 90 95 100

65 75 85 95 105

80 95 130 130

130 180
200

240
300
320

380
580 630 790 950 1100

1050 1100 1350 1550
1050

1250
1350
1700

1900 2150 2500 2600 - - - - ­2000

2250
2550
2680

10

(13)

250
290

330
400 470 540

1400 1700

1800 2100 2360 2380 2500 - - -

2350
2500

2700 - - - - - - -

16

(20)

160
180
260
320

360 420

2600
2700

25

(32)

190

320 370

1650
1950

- - - - - -

35

(44)

130
140
210
230

470
490
580
640

1550
1800

2200 2280 2360 - -

50

(63)

120
125

150

250 300 390
410

440
520
580

760
700

1350
2090

63

(79)

100
115
130
140
170
190

470
490
680
710
880

900
1300
1550
2120
1300

100

(125)

130
135
170
180
230
250

620
710
760

860
1000
1100

1550 -

- -

160

(200)

135 135 160 180 200

170 170

230
350

400
720 750

880

1120

(250)

34
48

58
83

1150 - - - -

200

160
230

420

910 - - - -

250

(300)

51 51
11

83

90

140
180

240

450 460 - -

- - - - -

- - - - -

- - - - -

- - - - -

- - - - -

- - - - -

- - - - -

350

(400)

39
63

115 115

190 190 210

250 250 280

- - - -

400

(450)

32
53
69

450

(500)

35
45

75
70

85
120
130

GSA

Features
For wide applications requiring miniature axial type

with excellent operating life and popular ratings.

DIMENSIONS: unit (mm)

D Case diameter 5 6 8 10 12 13 16 18 20 22
d Wire diameter 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8

SPECIFICATION CHARACTERISTIC
Rated Working Voltage Range: 6.3V-100V DC 160V-450V DC
Operating T emperat ure Range: -40℃ to +85℃ -25℃ to +85℃
Capacitance T olerance M

1≦0.02CV + 3 (uA) max 1≦0.03CV + 20 (uA) max DC Leakage Current: ( After 5 minutes

application of DC working voltage at 25℃
Dissipation factor (max) at 120Hz 25℃

Load life: 1000 hours at 85℃

Shelf life: 500 hours, no voltage applied at 85℃

C= Rated capacitance in uF V= Rated DC working voltage in V

WV DC 6.3 10 16 25 35 50-100 160-250 350-450

DF (tan δ) 0.24 0.20 0.17 0.15 0.12 0.10 0.20 0.24
For capacitor whose capacitance exceeds 1000UF, the value of tan δ is increase by 0.02
for every addition of 1000UF.

Capacitance change
DF (tan δ)
DC leakage current
Capacitance change
DF (tan δ)
DC leakage current

Within 25% of initial value
Not exceed 200% of initial specification
Not exceed the initial specification
Within 20% of initial value
Not exceed 200% of initial specification
Not exceed 200% of initial specification

CASE SIZE OF STANDARD PRODUCTS: TYPE D x L (mm)

WV(SV)

uF

1 5x12 6x12 6x12 8x16 8x16 8x16

2.2 5x12 6x16 8x16 8x16 10x17 10x17

3.3 5x12 6x12 8x16 8x16 8x16 10x17 10x21

4.7 5x12 6x12 6x12 8x16 8x16 10x17 10x21 13x22

6.8 5x12 6x12 6x12 6x16 8x16 10x17 10x17 10x21 13x22
10 5x12 6x12 6x12 6x16 8x16 10x17 10x21 10x21 13x22 16x28
15 5x12 6x12 6x12 8x16 8x16 10x21 13x22 13x22 13x31 16x32
22 5x12 6x12 6x12 6x13 8x16 8x16 13x22 13x22 13x27 16x32 16x33
33 5x12 6x12 6x13 6x13 8x13 8x16 10x17 13x26 13x27 16x32 16x33 16x37
47 5x12 6x12 6x12 6x13 8x13 8x16 10x17 10x17 16x28 16x28 16x33 16x37 18x38
68 5x12 6x12 6x12 6x13 8x13 8x16 8x16 10x17 10x21 16x32 16x33 16x37 18x43 22x43

100 6x12 6x12 6x16 8x13 8x13 8x17 10x17 10x21 13x26 16x41 18x38 18x43 22x43
150 6x12 6x13 8x16 8x13 8x16 10x21 10x17 10x22 13x31 18x43 22x43
220 8x13 6x13 8x13 8x16 8x16 10x17 10x22 16x28 16x28 22x43 22x43
330 8x16 8x16 8x13 8x16 10x17 13x22 12x27 16x28 16x33
470 8x16 8x16 8x17 10x17 13x22 13x22 13x32 16x37 16x37

680 10x17 10x17 10x21 13x22 10x22 13x27 16x27 16x37 18x38
1000 10x21 10x21 10x21 10x22 13x27 16x33 18x33 18x38 22x43
1500 10x21 13x22 13x22 13x27 13x28 18x38 22x43 22x43
2200 13x22 10x22 13x22 13x28 16x33 18x40 22x43
3300 13x22 13x27 13x28 16x33 18x33 22x43
4700 16x28 16x28 16x33 18x33 22x40
6800 16x37 16x37 18x40 22x40

10000 18x40 18x40 22x40

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

80

(100)

100

(125)

160

(200)

200

(250)

250

(300)

350

(400)

450

(600)

PERMISSIBLE RIPPLE CURRENT mA RMS MAXIMUM AT 120Hz 85℃

WV(SV)

uF

0.47 7 7 7 9 9 9 9 11
1 11 11 11 10 10 10 11 13 13

2.2 16 17 18 16 16 16 21 21 21

3.3 20 22 23 26 26 26 26 27 28

4.7 24 26 29 31 31 31 31 31 32

6.8 25 36 46 40 40 40 40 40 43
10 35 45 50 50 50 50 55 56 60
15 39 50 65 73 82 64 66 70 70 73
22 45 60 65 81 92 106 82 80 91 98 100
33 49 69 73 94 99 127 142 110 120 124 130 110
47 57 60 75 80 100 112 140 153 183 145 147 156 189 162
68 82 88 90 103 135 160 183 205 242 189 196 210 220 190

100 100 106 130 138 173 206 243 276 300 234 248 362 400
150 146 150 175 200 220 286 330 358 415 400 500
220 175 195 240 261 300 375 414 432 432 472 520
330 225 250 305 362 417 459 552 640 684
470 270 340 392 458 540 650 725 736 745

680 320 436 476 613 726 807 1000 1050 1100
1000 462 560 675 800 886 1015 1050 1325 1500
1500 615 762 860 1010 1110 1301 1318 1589
2200 790 850 1000 1200 1365 1422
3300 872 954 1200 1500 1572
4700 966 1185 1500 1652 1720
6800 1155 1210 1792 1800

10000 1480 1550 1890

6.3 10 16 25 35 50 63 80 100 160 200 250 350 450

5

℃

KKMM SSeerriieess SSttaannddaarrdd 11005

℃

Features
Used in communication equipments, switching power supply, etc.
Safety vent construction design.
For detail specifications, please refer to Engineering Bulletin No. E102
Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +85℃ -25 to +105℃
Rated voltage Range 6.3 to 100VDC 160 to 450 VDC
Capacitance Range 0.1 to 15000uF 0.47 to 220uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃, max) I ≦0.01CV or 3(uA) After 1 minutes

whichever is greater measured with rated
working voltage applied.

Dissipation Factor (tan δ)

Low T emperature Characteristics
(120Hz)

Load Life Test conditions

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
D.F. (%) max 24 20 16 14 12 10 9 9

Working Voltage (VDC) 160 200 250 350 400 450

D.F. (%) max 15 15 15 15 15 18
For capacitance> 1000uF, add 2% per another 1000uF. (+20℃, at 120Hz)
Impedance radio max.

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100

Z-25℃/ Z+20℃ 4 3 2 2 2 2 2 2

Z-40℃/Z+20℃ 8 6 4 4 3 3 3 3

Working Voltage(VDC) 160 200 250 350 400 450

Z-25℃/ Z+20℃ 2 2 3 5 6 15

For Capacitance Value 1000uF, Add 0.5 per another 1000uF for -25℃/+20℃
Add 1 per another 1000uF for -40℃/+20℃

Duration time :2000Hrs

Ambient temperature :+105℃

Applied voltage Rated DC working voltage

After test requirements at +20℃

Capacitance change ≦±20% of the initial measured value

Dissipation factor ≦200% of the initial specified value

Leakage current :≦The initial specified value

I ≦0.01CV (uA) After 1 minute with
rate working voltage applied

Shelf Life

Test conditions
Duration time: 500Hrs
Ambient temperature: +105℃

Applied voltage: None

After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minuts

Diagram of Dimensions: (Unit:mm)

D Ø 5 6.3 8 10 13 16 18 22

F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10

d Ø 0.5 0.6 0.8

Case Size: Ø DxL (mm)

WV(SV)

uF

0.1 5x11 5x11 5x11

0.22 5x11 5x11 5x11

0.33 5x11 5x11 5x11

0.47 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 6.3x11
1 5x11 5x11 5x11 6.3x11 6.3x11 6.3x11 6.3x11 8x11.5 8x11.5

2.2 5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x12.5 10x16

3.3 5x11 5x11 5x11 6.3x11 8x11.5 8x11.5 10x16 10x16 10x20

4.7 5x11 5x11 5x11 8x11.5 8x11.5 10x12.5 10x16 10x16 10x20
10 5x11 6.3x11 6.3x11 10x16 10x20 10x20 10x20 13x20 13x20
22 5x11 6.3x11 6.3x11 8x11.5 10x20 10x20 13x20 13x25 16x25 16x31.5
33

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

5x11

50

(63)

6.3x11 8x11.5 10x12.5 10x20 13x20 13x25 16x25 16x31.5 16x35.5

63

(79)

100

(125)

160

(200)

200

(250)

250

(300)

350

(400)

400

(450)

450

(500)

47
100 5x11 6.3x11 6.3x11 6.3x11 8x11.5 10x12.5 10x16 13x20 16x25 16x25 16x31.5
220 6.3x11 6.3x11 8x11.5 10x12.5 10x12.5 10x16 10x20 16x25 16x35.5
330 8x11.5 8x11.5 8x11.5 10x12.5 10x16 10x20 13x20 16x31.5
470 8x11.5 8x11.5 10x12.5 10x16 10x20 13x20 13x25 16x31.5

1000 10x12.5 10x16 10x20 13x20 13x25 16x25 16x31.5
2200 10x20 13x20 13x25 16x25 16x31.5 18x35.5
3300 13x20 13x25 16x31.5 16x35.5 18x35.5 18x35.5
4700 13x25 16x25 16x31.5 16x35.5 18x41

6800 16x25 16x31.5 18x35.5 18x41
10000 16x31.5 18x35.5 18x41
15000 18x35.5

5x11 5x11

6.3x11 6.3x11 6.3x11 8x11.5 10x16 13x25 13x25 13x25 16x31.5 16x35.5

Maximum Ripple Current

WV(SV)

uF

0.1 8 8 10

0.22 8 8 10

0.33 8 8 10

0.47 8 8 10 12 12 12 14 14 14
1 12 12 15 17 17 17 20 20 20

2.2 20 20 23 25 25 29 35 35 35

3.3 25 28 32 36 36 42 47 47 54

4.7 26 28 30 34 37 43 50 50 55 55 60
10 35 38 41 46 50 56 59 59 64 79 79 87
22 49 54 57 61 68 82 96 96 96 110 130 145 165
33 54 60 64 69 75 90 100 120 125 140 140 175 185 210
47 65 70 99 105 110 125 135 160 165 165 180 230 240

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

100

(125)

160

(200)

200

(250)

250

(300)

350

(400)

400

(450)

450

(500)

100 95 105 125 135 170 180 225 245 270 285 310
220 160 175 215 230 300 345 400 450 480
330 195 245 260 335 400 460 540 700

470 270 290 370 440 520 610 700 880
1000 460 550 640 770 920 1080 1210
2200 810 860 1000 1170 1340 1530
3300 960 1100 1300 1460 1650 1750
4700 1330 1400 1600 1780 1900
6800 1500 1690 1900 1950

10000 1765 1950 2060
15000 2075

Multiplier for ripple current vs. Frequency

CAP(uF)/Hz 50(60) 120 400 1K 10K 50-100K Temperature 45 60 70 85 105

CAP≦10

0.8 1 1.30 1.30 1.65 1.70 Multiplier 2.10 1.90 1.40 1.25 1.00

Multiplier for Ripple Current vs. Temperature

Multiplier

10<CAP≦100
100<CAP≦1000

1000<CAP

0.8 1 1.23 1.23 1.48 1.53

0.8 1 1.16 1.16 1.35 1.38

0.8 1 1.11 1.11 1.25 1.28

5

℃

SSMM SSeerriieess 77mmmm 885

Features
Design for space-saving and high density insertion.

Applications: VTR, car radio, car stereos, charger, etc.
For detail specifications, please refer to Engineering Bulletin No. E104
Specifications

Item Performance Characteristics
Operating T emperat ure Range -40℃to +85℃
Rated Voltage Range 4 to 63 VDC
Capacitance Range 0.1 to 470uF
Capacitance T olerance ±20%(120Hz, +20℃)
Leakage Current (+20℃, max) I≦0.01CV or 3(uA)

After 1 minute whichever is greater measured with rated working voltage applied.

Dissipation Factor (tan δ)

Working Voltage (VDC) 4 6.3 10 16 25 35 50 63
D.F. (%) max. 35 24 20 16 14 12 10 9

(+20℃, at 120Hz)

℃

Low T emperature Characteristics
(120 Hz)

Load Life Test conditions:

Shelf Life Test conditions

Impedance radio max.

W o rkin g Voltage (VDC) 4 6.3 10 16 25 35 50 63
Z-25℃/Z+20℃ 7 4 3 2 2 2 2 2
Z-40℃/Z+20℃ 15 8 6 4 4 3 3 3

Duration time :1000Hrs
Ambient temperature :+85℃
Applied voltage :Rated DC working voltage
After test requirements at +20℃
Capacitance change :≦ ±20% of the initial measured value (4V:≦±30%)
Dissipation factor :≦ 200% of the initial specified value
Leakage current :≦ The initial specified value

Duration time : 500HRS
Ambient temperature :+85℃
Applied voltage None
After test requirements at +20℃ :Same limits as Load life
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

Multiplier for Ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF). Hz 50(60) 120 400 1K 10K 50K-100K Temperature ℃ 45 60 70 85

CAP≦10 0.8 1 1.30 1.45 1.65 1.70 Multiplier 1.8 1.50 1.30 1.0

Multiplier

10<CAP≦100 0.8 1 1.23 1.36 1.48 1.53

100<CAP≦1000 0.8 1 1.16 1.25 1.35 1.38

Diagram of Dimensions: (Unit: mm)

Ø

D

4 5 6.3 8

F 1.5 2.0 2.5 3.5

d Ø

0.45 0.5

Case Size

WV (SV)
uF

0.1 4x7 4x7

0.22 4x7 4x7

0.33 4x7 4x7

0.47 4x7 4x7
1 4x7 4x7

2.2 4x7 4x7

3.3 4x7 5x7

4.7 4x7 4x7 4x7 5x7
10 4x7 4x7 4x7 5x7 6.3x7
22 4x7 4x7 5x7 5x7 6.3x7
33 4x7 5x7 5x7 6.3x7 8x7
47 4x7 4x7 4x7 5x7 6.3x7 8x7

100 4x7 5x7 5x7 6.3x7 8x7
220 6.3x7 6.3x7 6.3x7 8x7
330 6.3x7 8x7 8x7
470 8x7

4

(5)

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

Maximum Ripple Current

WV (SV)
uF

0.1 3 4

0.22 3 4

0.33 3 4

0.47 5 6
1 10 13

2.2 19 21

3.3 24 26

4.7 15 20 29 33
10 30 30 30 32 35
22 35 37 45 47 50
33 40 42 47 52 62
47 35 40 47 65 65 70

100 40 65 90 92 95
220 65 120 125
330 120 150 155
470 150

4

(5)

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

5

℃

SSKK SSeerriieess 77mmmm 11005

Features
Design for space saving and high density insertion.
Applications: VTR, car radio, car stereos, charger, etc.
For detail specifications, please refer to Engineering Bulletin No. E 115
Specifications

Item Performance Characteristics
Operating T emperat ure Range -40℃to +105℃
Rated Voltage Range 4 to 63 VDC
Capacitance Range 0.1 to 470uF
Capacitance T olerance ±20%(120Hz, +20℃)
Leakage Current (+20℃, max) I≦0.01CV or 3(uA)

After 1 minute whichever is greater measured with rated working voltage applied.

Dissipation Factor (tan δ)

Working Voltage (VDC) 4 6.3 10 16 25 35 50 63
D.F. (%) max. 35 24 20 16 14 12 10 9

(+20℃, at 120Hz)

℃

Low T emperature Characteristics
(120 Hz)

Load Life Test conditions:

Shelf Life Test conditions

Impedance radio max.

W o rkin g Voltage (VDC) 4 6.3 10 16 25 35 50 63
Z-25℃/Z+20℃ 7 4 3 2 2 2 2 2
Z-40℃/Z+20℃ 15 8 6 4 4 3 3 3

Duration time :1000Hrs
Ambient temperature :+105℃
Applied voltage :Rated DC working voltage
After test requirements at +20℃
Capacitance change :≦ ±20% of the initial measured value (4V:≦±30%)
Dissipation factor :≦ 200% of the initial specified value
Leakage current :≦ The initial specified value

Duration time : 500HRS
Ambient temperature :+105℃
Applied voltage None
After test requirements at +20℃ :Same limits as Load life
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

Multiplier for Ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF). Hz 50(60) 120 400 1K 10K 50K-100 K Tem perat ure ℃ 45 60 70 85 105

CAP≦10 0.8 1 1.30 1.45 1.65 1.70 Multiplier 2.10 1.90 1.65 1.40 1.00

Multiplier

10<CAP≦100 0.8 1 1.23 1.36 1.48 1.53

100<CAP≦1000 0.8 1 1.16 1.25 1.35 1.38

Multiplier for Ripple Current vs. Frequency

D Ø
F Ø
d Ø

4 1.5 6.3 8

1.5 2.0 2.5 3.5

0.45 0.5

Case Size

WV (SV)
uF

4

(5)

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.1 4x7 4x7

0.22 4x7 4x7

0.33 4x7 4x7

0.47 4x7 4x7
1 4x7 4x7

2.2 4x7 4x7

3.3 4x7 5x7

4.7 4x7 4x7 4x7 5x7
10 4x7 4x7 4x7 5x7 6.3x7
22 4x7 4x7 5x7 5x7 6.3x7
33 4x7 4x7 5x7 6.3x7 8x7
47 4x7 4x7 5x7 5x7 6.3x7 8x7
100 4x7 5x7 6.3x7 6.3x7 8x7
220 6.3x7 6.3x7 8x7
330 6.3x7 8x7
470 8x7

Maximum Ripple Current

WV (SV)
uF

4

(5)

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.1 3 4

0.22 3 4

0.33 3 4

0.47 5 6
1 10 13

2.2 19 21

3.3 24 26

4.7 15 20 29 33
10 30 30 30 32 35
22 35 37 45 47 50
33 40 42 47 52 62
47 35 40 47 65 65 70
100 40 65 90 92 95
220 65 120 125
330 120 150
470 150

LLLL SSeerriieess LLooww LLeeaakkaaggee CCuurrrreenntt

Features

Extremely low and stable leakage current characteristics.
Close capacitance tolerance ±20% (±10% on requested)

For detail specifications, please refer to Engineering Bulletin No. E109

Specifications

Item Performance Characteristics
Operating T emperat ure Range -40℃to +85℃
Rated Voltage Range 10 to 63 VDC
Capacitance Range 0.1 to1000uF
Capacitance T olerance ±20%(120Hz, +20℃)
Leakage Current (+20℃, max)

Dissipation Factor (tan δ)

Low T emperature Characteristics
(120 Hz)

After 3 minutes, (90 sec.≦10uF) whichever is greater measured with rated working voltage
applied.

W o rkin g Voltage (VDC) 4 6.3 10 16 25 35 50 63
D.F. (%) max. 35 24 20 16 14 12 10 9

(+20℃, at 120Hz)

Impedance radio max.

W o rkin g Voltage (VDC) 6.3 10 16 25 35 50 63
Z-40℃/Z+20℃ 4 3 3 2 2 2 2

I≦0.002CV or 0.4(uA)

*8 for C ≦1uF

Load Life Test conditions:

Duration time :2000Hrs
Ambient temperature :+85℃
Applied voltage :Rated DC working voltage
After test requirements at +20℃
Capacitance change :≦ ±20% of the initial measured value
Dissipation factor :≦ 150% of the initial specified value
Leakage current :≦ The initial specified value

Shelf Life Test conditions

Duration time : 500HRS
Ambient temperature :+85℃
Applied voltage None
After test requirements at +20℃ :Same limits as Load life
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

Multiplier for Ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF). Hz 50(60) 120 400 1K 10K 50K-100K Temperature ℃ 45 60 70 85 95 105

CAP≦10 0.8 1 1.30 1.45 1.65 1.70 Multiplier 1.50 1.30 1.45 1.30 1.15 1.00

Multiplier

10<CAP≦100 0.8 1 1.23 1.36 1.48 1.53

100<CAP≦1000 0.8 1 1.16 1.25 1.35 1.38

Multiplier for Ripple Current vs. Frequency

D Ø
F Ø
d Ø

5 6.3 8 10 13

2.0 2.5 3.5 5.0 5.0

0.5 0.6

Case Size

WV (SV)
uF

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.1 5x11 5x11

0.22 5x11 5x11

0.33 5x11 5x11

0.47 5x11 5x11
1 5x11 5x11

2.2 5x11 5x11

3.3 5x11 5x11

4.7 5x11 5x11
10 5x11 5x11 5x11 6.3x11
22 5x11 5x11 5x11 6.3x11 6.3x11
33 5x11 5x11 5x11 5x11 6.3x11 8x11.5
47 5x11 6.3x11 6.3x11 6.3x11 6.3x11 8x11.5
100 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x20
220 6.3x11 8x11.5 10x12.5 10x12.5 10x20 13x20
330 8x11.5 8x11.5 10x12.5 10x20 13x20 13x25
470 8x11.5 10x12.5 10x20 13x20 13x25
1000 10x16 10x20 13x20 13x25

Maximum Ripple Current

WV (SV)
uF

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.1 8.8 8.8

0.22 8.8 8.8

0.33 8.8 8.8

0.47 8.8 8.8
1 13.2 13.2

2.2 22 22

3.3 28 31

4.7 33 38
10 42 46 51 55
22 60 63 68 75 91
33 66 70 76 83 99 110
47 77 109 116 121 138 149
100 116 138 149 187 198 248
220 193 237 253 330 380 440
330 270 286 369 440 506 594
470 319 407 484 572 671
1000 605 704 847 1012

GGLL SSeerriieess LLooww IImmppeeddaannccee,, LLoonngg LLiiffee

Features

zLow impedance for high frequency, Anti-Solvent design.
zLong life 2000~3000 Hrs at 105℃ depending on case size.

zRadial type for switching power suppliers.
zFor detail specifications, please refer to Engineering Bulletin No. E103

Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +105℃
Rated voltage Range 6.3 to 63VDC
Capacitance Range 0.47 to 4700uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃, max)

After 2 minutes whichever is greater measured with rated working voltage applied.

Dissipation Factor (tan δ)

Working Voltage (VDC) 6.3 10 16 25 35 50 63
D.F. (%) max 15 12 11 9 8 6 5

(+20℃, at 120Hz)
Low T emperature Characteristics
(120Hz)

Impedance radio max.

Working Voltage (VDC) 6.3 10 16 25 35 50 63
Z-25℃/ Z+20℃ 4 3 2 2 1.5 1.5 1.5
Z-40℃/Z+20℃ 6 4 3 3 2 2 2

Z-55℃/Z+20℃ 8 6 5 5 4 4 4
For Capacitance Value 1000uF, Add 0.5 per another 1000uF for -25℃/+20℃
Add 1 per another 1000uF for -40℃/+20℃

Load Life Test conditions

Duration time :as right

Ambient temperature :+105℃

Applied voltage Rated DC working voltage

After test requirements at +20℃

Capacitance change :≦±20% of the initial measured value

Dissipation factor :≦200% of the initial specified value

Leakage current :≦The initial specified value

I ≦0.01CV or 3(uA)

D Ø life hours
5-6.3 Ø 2000
8 Ø 2000
10 Ø ≧ 3000

Shelf Life

Test conditions
Duration time : 500Hrs
Ambient temperature : +105℃

Applied voltage : None

After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

Multiplier for ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF) / Hz 50(60) 120 400 1K 10K 50K-100K

Multiplier Cap≦10

10<CAP≦100

100<CAP≦1000

1000<CAP

0.47 0.59 0.76 0.85 0.97 1 Temperature ℃ 45 60 70 85 95 105

0.52 0.65 0.80 0.89 0.97 1 Multiplier 2.10 1.90 1.65 1.40 1.25 1.00

0.58 0.72 0.84 0.90 0.98 1

0.63 0.78 0.87 0.91 0.98 1

Diagram of Dimension (Unit:mm)

Case Size

D Ø 5 6.3 8 10 13 16 18

F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

d Ø 0.5 0.6 0.8

Ø DxL (mm)

WV (SV)
uF

0.47 5x11 5x11
1 5x11 5x11

2.2 5x11 5x11

3.3 5x11 5x11

4.7 5x11 5x11
10 5x11 5x11 5x11 5x11 5x11
22 5x11 5x11 5x11 5x11 6.3x11 6.3x11
33 5x11 5x11 5x11 5x11 6.3x11 8x11.5
47 5x11 5x11 5x11 6.3x11 8x11.5 8x11.5

100 5x11 5x11 6.3x11 6.3x11

220 6.3x11 6.3x11

330

470

1000

2200

3300

4700

6.3
(8)

6.3x15
8x11.5

6.3x15

10x12.5

10x25
13x20

8x15

10x12.5

13x25

13x30
16x25

10

(13)

6.3x15
8x11.5

8x11.5

8x20

10x16
13x25 13x25

13x30
13x35

16x31.5

16

(20)

6.3x15
8x11.5

8x11.5

8x15

10x12.5

10x25

13x25
16x25

16x31.5

18x25

25

(32)

8x11.5

8x15

10x12.5

10x16 10x20 13x20 16x25.5
10x25

13x25
13x30
16x25
16x30
18x25
16x40

18x35.5

35

(44)

6.3x15
8x11.5

8x15

10x12.5

10x16 10x25

13x30

16x31.5

18x25

50

(63)

8x16 10x16

10x20

13x40

16x31.5
18x35.5

63

(79)

10x25
13x20
10x30
13x25

16x25.5

Maximum Ripple Current

(mA, rms, 100KHz at 105℃)

WV (SV)

uF

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.47 15 16
1 25 27

2.2 33 38

3.3 45 48

4.7 58 62
10 37 56 70 100 105
22 56 70 120 130 135 245
33 58 130 150 175 230 265
47 120 190 220 250 285 351

100 185 205 260 300

220 300 330

330

470

1000

2200

320
390
435
415
710

625
1400
1300

445
430

555

1040
1010

1690 1950

3300 1425 1980

4700

1950
1800

2300
2100

470
455

550
745

722

1180

2410
2340
2650
2570

550
740

720
1040 1150 1490 2000
1580

1530
2480
2405
3050
2960
3600
3490

390
380
740
720

475

900 1020

995 1050

1950
2650

2570

2200
2130

2900

610
590

1200
1160

2450

Maximum Impedance

(Ω,100KHz at 105℃)

WV (SV)

F

6.3
(8)

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

0.47 6.30 6.30
1 4.00 4.00

2.2 2.80 2.80

3.3 2.40 2.40

4.7 2.40 2.40
10 4.00 2.10 2.80 1.80 1.90
22 2.70 2.00 1.80 1.50 1.00 0.85
33 2.20 1.26 1.20 1.30 0.80 0.61
47 1.20 0.52 0.50 0.80 0.50 0.56

100 1.10 0.48 0.31 0.28

220 0.70 0.28

330

470

1000

2200

0.38

0.35

0.25

0.30

0.12

0.20

0.06

0.10

0.15

0.16

0.115

0.070

0.072

0.041 0.035

3300 0.05 0.029

4700

0.025

0.036

0.025

0.031

0.20

0.21

0.12

0.092

0.095

0.050

0.025

0.028

0.024

0.028

0.125

0.085

0.082

0.065 0.050 0.055 0.050

0.038

0.039

0.025

0.028

0.020

0.024

0.016

0.017

0.18

0.19

0.095

0.098

0.18

0.080 0.110

0.065 0.068

0.031

0.025

0.030

0.033

0.036

0.025

0.24

0.25

0.065

0.070

0.032

5

℃

NNPP SSeerriieess NNoonn--ppoollaarr 885

Features
NP Series for crossover networks of high-pitched, mean and low-pitched sounds in high-fidelity sound systems.
The series offers excellent frequency characteristics and minimal capacitance deviation with frequency.
For detail specifications, please refer to engineering Bulletin No.
Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +85℃ -25 to +85℃
Rated voltage Range 6.3 to 100VDC 160 to 250VDC
Capacitance Range 0.47 to 1000uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃, max) I ≦0.03CV or 3(uA)

After 1 minute whichever is greater measured with rated working voltage applied.

Dissipation Factor (tan δ)

Low T emperature Characteristics
(120Hz)
Load Life Test conditions

Shelf Life

Working Voltage (VDC) 6.3 10 16 25 35 50 63 100
D.F. (%) max 25 25 20 15 15 13 10 10

Working Voltage (VDC) 160 200 250
D.F. (%) max 15 15 20

(+20℃, at 120Hz)
For Capacitance Value 1000uF, Add 0.5 per another 1000uF for -25℃/+20℃
Add 1 per another 1000uF for -40℃/+20℃

Duration time :2000Hrs
Ambient temperature :+85℃
Applied voltage Rated DC working voltage

5.Each 250 hours, we will reserve the terminal and test the characteristics.

After test requirements at +20℃
Capacitance change :≦±20% of the initial measured value (4V: ≦±30%)

Dissipation factor :≦150% of the initial specified value
Test conditions
Duration time : 500Hrs
Ambient temperature : +85℃

Applied voltage : None

After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

℃

Multiplier for ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF) / Hz 50(60) 120 400 1K 10K 50K-100K

Multiplier Cap≦10

10<CAP≦100

100<CAP≦1000

1000<CAP

Diagram of Dimensions: (Unit:mm)

0.8 1 1.30 1.30 1.65 1.70 Temperature ℃ 45 60 70 85

0.8 1 1.23 1.23 1.48 1.53 Multiplier 2.10 1.90 1.65 1.40

0.8 1 1.16 1.16 1.35 1.38

0.8 1 1.11 1.11 1.25 1.28

D φ 5 6.3 8 10 13 16
F 2.0 2.5 3.5 5.0 5.0 7.5
D φ 0.5 0.6 0.8

Case Size

WV(SV)

uF

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

100

(125)

160

(200)

200

(250)

250

(300)

0.47 5x11 5x11 5x11 6.3x11 6.3x11
1 5x11 5x11 6.3x11 8x11.5 8x11.5

2.2 5x11 5x11 8x11.5 8x11.5 10x12.5

3.3 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x16

4.7 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20
10 5x11 6.3x11 6.3x11 8x11.5 10x16 10x20 10x20
22 5x11 6.3x11 6.3x11 8x11.5 8x11.5 10x16 13x20 13x20 13x25
33 5x11 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5 10x20 13x20 13x25 16x25
47 5x11 6.3x11 6.3x11 8x11.5 10x12.5 10x16 13x20 13x25
100 6.3x11 8x11.5 8x11.5 10x12.5 10x20 13x20 16x25
220 8x11.5 10x12.5 10x12.5 10x20 13x25 13x25
330 10x12.5 10x12.5 10x16 13x20 16x25
470 10x12.5 10x16 13x20 13x25
1000 10x20 13x21

Maximum Ripple Current

WV(SV)

uF

0.47 11 12 14 17 21 28
1 17 18 21 25 28 34

2.2 25 26 34 38 42 50

3.3 27 28 39 43 47 57

4.7 34 34 47 52 56 89
10 34 43 52 57 71 89 95 135
22 52 57 65 73 89 95 135 150 180 220
33 64 70 80 100 105 135 220 230 265 320
47 76 95 95 120 150 180 240 265
100 125 160 160 230 265 320 425
220 215 275 305 410 480 575
330 345 375 450 505 650
470 410 485 540 655

10

(13)

16

(20)

25

(32)

35

(44)

50

(63)

63

(79)

100

(125)

160

(200)

200

(250)

250

(300)

1000 720 855

5

℃

LLPP SSeerriieess SSnnaapp--iinn TTyyppee 885

Features
Directly mountable on printed circuit board, withou t hol d ers.
Aluminum case designed explosion-proof vent.
For detail specifications, please refer to Engineering Bulletin No. E106
Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +85℃ -25 to +85℃
Rated voltage Range 10 to 100VDC 160 to 450VDC
Capacitance Range 470 to 68000uF 47 to 2700uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃, max) I ≦0.03CV After 5 minutes
Dissipation Factor (tan δ)

Low T emperature Characteristics
(120Hz)

Load Life Test conditions

Shelf Life

Less than the value under table(%)

uF/WVDC 10~16 25~35 50~63 80~100 160~250 315~450

47~390 15 20

470~3900 25 20 20 20 15 20

4700~8200 35 30 30 25

10000~22000 40 35 30

27000~47000 45 40 35

56000~68000 50 45
(+20℃, at 120Hz)
Impedance radio at 120Hz.

-25℃/+20℃: 3 max

-40℃/+20℃:12 max

Duration time :2000Hrs

Ambient temperature :+85℃

Applied voltage Rated DC working voltage

After test requirements at +20℃

Capacitance change :≦±20% of the initial measured value

Dissipation factor :≦200% of the initial specified value

Leakage current :≦The initial specified value
Test conditions
Duration time : 500Hrs
Ambient temperature : +85℃

Applied voltage : None

After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working
voltage for 30 minutes.

℃

Diagram of Dimensions: (Unit: mm)

Multiplier for ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF) / Hz 50(60) 120 1K 10K 50K-100K

Multiplier 10<CAP≦100

100<CAP≦1000

1000<CAP

0.8 1 1.36 1.48 1.53 Temperature ℃ 45 60 70 85

0.8 1 1.25 1.35 1.38 Multiplier 1.55 1.30 1.20 1.00

0.8 1 1.17 1.25 1.28

Case Size and Maximum Ripple Current: (Unit A, rms 120 Hz at 85℃)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

WV uF

(A)

Case Size

Ø DxL(mm)
4700 22x21 2.40 4700 22x21 2.40 4700 22x26 2.64 2200 22x26 2.18
6800 22x26 2.84 6800 22x26 2.84 5600 22x31 2.78 3300 22x26 2.46
8200 22x26 2.90 8200 22x26 2.90 22x31 3900 22x31 2.64

10

10000

12000

15000

18000

22000

22x31 22x31
25x26

3.06 10000
25x26

3.06

25x26
22x31

8200

6800

22x31 22x31
25x26

25x26

22x36 22x36 25x31 22x46

3.94 15000

3.43 12000

25x31

25x31

3.43

10000

3.94

25x26
22x36

30x26
25x41 25x41 22x41
25x31

25x31

22x46 22x46

4.34 18000

25x36 25x36 22x51
30x31

4.80 22000
30x31

4.34

4.80

25

12000

15000

25x36 25x46
30x31

25x41 25x51

2.93

3.05

3.43

3.84

4.39

35

4700

6800

10000

12000

22x31

25x26

22x36

25x31

25x41
30x31

30x36
35x32

Ir

(A)

2.68

3.06

3.60

4.08

27000

25x46 25x46
30x36

7.57 27000
30x36

7.57
18000

25x51 25x51

30x31
25x46

4.80

30x36

15000

18000

33000

30x41 30x41 25x51
35x32

8.20 33000
35x32

8.20
22000

30x41

5.40
22000

30x46 30x46 30x46

39000

35x37

8.33 39000
35x37

8.33 27000
35x37

5.97
27000 35x47 5.78

30x51 30x51 30x51 33000 35x52 6.36

47000

35x42
56000 35x47 10.5 56000 35x47 10.5 39000 35x47 7.10
68000 35x52 10.8 1668000 35x32 10.8

8.96 47000
35x42

8.96 33000

47000 35x52 7.60

35x42

6.24

30x41
35x32
30x46
35x37
30x51
35x42

3.92

4.70

5.45

)

WV uF

Case Size

DxL(mm

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)
1500 22x26 1.44 1000 22x26 1.58 680 22x21 1.34 470 22x21 1.34
2200 22x26 2.04 1500 22x26 1.68 1000 22x26 1.62 680 22x26 1.53
2700 22x31 2.30 22x31 22x31 22x31
3300 22x31 2.64

2200

25x36

2.52 1500
25x26

1.76 1000
25x26

25x26 22x36 22x36 22x36

4700 25x31 2.88

2700

25x31

2.82 1800
25x31

1.82 1200
25x31

30x26 22x41 22x41 22x41
30x31 25x31 25x31 25x36

5600 22x51 3.06

3300

30x26

3.12 2200
30x26

2.52 1500
30x31

25x41 22x46 22x46 22x46
30x31 25x36 25x36 25x41

6800 22x51 3.24

50

25x41 22x51 22x51 22x51
30x31 25x41 25x41 25x41

3900

30x31

63

4700

3.21 2700

80

3.28 3300

30x31

2.76 1800
30x31

100

3.24 2200

Ir

(A)

1.62

1.74

1.85

2.64

8200 25x46 3.48

35x27

30x31

30x36 25x46 25x46 25x46

10000 25x51 3.96 30x36

30x41

5600

35x32

3.86

30x36
25x51 25x51

4700

3900

35x32 25x51

12000 30x46 4.10 30x41 30x46 30x46

6800

4.32

30x41

5600

35x37

35x32

35x37

3.40 2700

3.60 3300

3.78 3900

15000 30x51 4.70 30x46 30x51 30x51

35x42 5.31 35x37
1800 35x47 5.85
2200 35x52

8200

35x42 4.77 8200 35x52 4.92 5600 35x47 3.72

1000 35x52 5.04

4.44 6800
35x42

10000 35x63 5.04

4.60 4700

6800 35x52 4.10

30x31

30x36

3.42

30x41

3.58

35x37

3.72

35x42

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)
180 22x21 1.12 150 22x21 0.96 120 22x21 0.85 100 22x26 0.76
270 22x26 1.35 220 22x26 1.36 150 22x26 0.98 22x31

120

330 22x26 1.44 270 22x26 1.50 180 22x26 1.12

25x26

22x31 22x31 22x31 22x36

390

470

560

25x26
22x31 22x31 22x31
25x26
22x36 22x26 22x36 25x36
25x31 25x31 25x31
30x26

1.66 330
25x26

1.76 390
25x26

2.03 470
30x26

1.89 220

1.92 270

2.23 330

25x26

25x26

30x26

1.36

1.60

1.87

150

180

25x31
30x26
22x41

30x26
22x46

22x41 22x41 22x41 25x41

220

680

25x36 25x36 25x36 30x31
30x26

2.36 560
30x26

2.57 390
30x26

2.04
35x27

22x46 22x46 22x46 25x46

Ir

(A)

0.89

0.99

1.15

1.40

160

820

100

0

120

0

0

0

220

0

270

0

25x41 25x36 25x41 30x36
30x36

2.72 680
200

30x31

2.98 470
250

30x31

2.38 270
350

35x27

1.63

25x46 25x46 25x46 25x51
30x36 30x36 30x36 30x41
35x32

3.13 820
35x27

3.26 560
35x27

2.81 330
35x32

1.88

25x51 25x51 25x51 30x46

100

30x36 30x41 30x41

3.44

3.92 680

3.11

390

35x37

2.12

0

35x32

35x32

35x32

30x51 2.41

470

30x46 30x46 30x46

3.96

35x37
30x51 30x51 30x51 680 35x52 180

4.47

35x42

120

0

150

0

35x37

35x42

4.25 820

4.99 1000

35x37

35x42

3.55

35x42 2.90150

560 35x47 3.20

4.00

180

35x47 4.65

35x47 5.84 1200 35x47 4.55

0

220

35x52 4.76

35x52 6.07 1500 35x52 5.34

0

1800 40x52 6.11

WV uF

47 22x21 0.42 22x51 47 22x26 0.36 30x46
68 22x26 0.51 25x41 22x31
82 22x26 0.83

100

120

400

150

180

560 35x52 3.16

Case Size

Ø DxL(mm)

22x31 25x46 22x36
25x26
22x31
25x26
22x36 30x41 22x51
25x31
30x26
22x41
25x36 35x47
30x31

Ir

(A)

1.03

1.07

1.26

1.46

WV uF

220

270

330

400

390

470

Case Size

Ø DxL(mm)

30x36

30x36
35x32
25x51

35x37
30x46
35x42

40x37

Ir

(A)

1.75

1.96

2.26

2.50

2.80

WV uF

82

100

120

450

150

180

220

Case Size

Ø DxL(mm)

25x26

25x31
22x41
25x36

25x41
30x31
22x51
30x36
25x51
35x37

Ir

(A)

0.89

1.03

1.19

1.39

1.52

1.76

WV uF

Case Size

Ø DxL(mm)

330

35x37
35x42

390

40x37
35x47

470

40x42

560 40x52 3.26

450

Ir

(A)

2.29

2.54

2.89

680 40x52 3.59

HHPP SSeerriieess SSnnaapp--iinn ttyyppee 110055℃℃

Feature

zHighly reliable capacitor that withstand ripple current.

zTwo or three dimensions with same ratings.

zTerminal spacing fixed at 10mm for printed circuit board plug in.

zAluminum case designed explosion-proof vent.

zBest for switching power supplies.

zFor detail specifications, please refer to Engineering Bulletin No. E107

Specifications

Item Performance Characteristics
Operating Temperature Range -40 to +105℃ -25 to +105℃
Rated working voltage Range 10 to 100VDC 160 to 450VDC
Nominal Capacitance Range 330 to 68000uF 33 to 2200uF
Capacitance T olerance ±20% (120Hz, +20℃)
Leakage Current (+20℃) I ≦0.03CV After 5 minutes
Dissipation Factor (120Hz,+20
℃)

Less than the value under table (%) max

uF/WVDC 10~16 25~35 50~63 80~100 160~250 315~450
33~470 15 15 20
560~3900 25 20 20 20 15 20
4700~8200 35 30 30 25
10000~22000 40 35 30
27000~47000 45 40 35
56000~68000 50 45

(+20℃, at 120Hz)

Stability at Low Temperature Impedance radio at 120Hz.

Rated Voltage (V) 10 16 25 35 50 63 100 160 200 250 400 450
Z-25℃/Z+20℃ 5 5 4 4 4 4 4 4 4 4 8 8
Z-40℃/Z+20℃ 15 15 15 12 12 12 12

Load Life Test conditions

Duration time :2000Hrs
Ambient temperature :+85℃
Applied voltage Rated DC working voltage
After test requirements at +20℃
Capacitance change :≦±20% of the initial measured value
Dissipation factor :≦200% of the initial specified value
Leakage current :≦The initial specified value

Shelf Life

Test conditions
Duration time : 500Hrs
Ambient temperature : +85℃

Applied voltage : None

After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working voltage
for 30 minutes.

Diagram of Dimensions: (Unit: mm)

Multiplier for ripple current vs. Frequency Multiplier for Ripple Current vs. Temperature

CAP (uF) / Hz 50(60) 120 400 1K 10K 50K-100K

Multiplier Cap≦10

10<CAP≦100

100<CAP≦1000

1000<CAP

0.8 1 1.30 1.30 1.65 1.70 Temperature ℃ 45 60 85 95 105

0.8 1 1.23 1.23 1.48 1.53 Multiplier 2.10 1.90 1.40 1.25 1.00

0.8 1 1.16 1.16 1.35 1.38

0.8 1 1.11 1.11 1.25 1.28

Case Size and Maximum Ripple Current (A, rms 120 Hz at 105℃)

uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

uF

Case Size

Ø DxL(mm)

Ir

(A)

uF

Case Size

Ø DxL(mm)

(A)

4700 22x26 1.24 3300 22x26 1.17 16 56000 35x52 7.05 1500 22x26 1.26

22x26 22x31 2200 22x26 1.03 22x31

6800

25x26

8200 22x26 2.04 22x31

22x31 25x26 22x31 25x26

10000

25x26
30x26

1.56 4700
25x26

6800

2.20

30x26

8200 22x31 2.20

1.53

2.02

3300

4700

22x26
25x26

25x26
30x26

1.48

1.92

2200

1.35

25x26
22x31

3300

1.84

30x26

3900 22x31 2.23

12000 22x36 2.34 22x36 5600 22x31 2.25 22x36

15000

18000

22x36 25x31 22x31 25x31
25x31

2.76

30x26
22x36 25x31 22x36 25x31

10000

30x26
22x36

12000

2.94

25x31

30x26

22x41 22x51

2.79

3.06

6800

8200

25x26
30x26

25x31
30x26

2.60

3.04

4700

5600

2.42
30x26
22x36

2.89
30x26
22x41

Ir

10

22000

27000

33000

39000

47000

56000

25x36 25x41 22x41 25x36

3.12 15000

3.24

6800

3.24

30x31 30x36 25x36 30x31

10000

35x27

35x32

25

22x46 22x51

30x31
35x27

3.50

35

35x27
22x51

25x36 25x46 22x46 25x41

3.48 18000

3.51

8200

3.57

30x31 30x36 25x41 30x31
35x27
25x46 25x51
30x36 30x46 25x46 30x36

3.72 22000
35x32
25x51 25x51
30x41 30x41 25x51 30x41

4.10 27000
35x32
30x46 33000 30x46

4.38
35x37

35x37

35x32

35x32

35x37

4.08

4.30

4.83

15000

18000

30x31
35x27

30x36
35x32

30x41
35x37
30x46

22000

12000

30x51 30x51
35x42

4.64 3900

35x42

5.78
27000 35x47 5.47 22000 35x52 5.50

35x37

4.02

4.58

4.82

5.12

35x27
25x46

10000

3.96
35x32
25x51

12000

4.21
35x32
30x46

15000

4.69
35x37

18000 35x42 5.07

68000 35x52 4.80 1647000 35x47 6.32

33000 35x52 6.09

)

)

)

)

WV uF

Case Size

DxL(mm

Ir

(A)

WV uF

Case Size

DxL(mm

Ir

(A)

WV uF

Case Size

DxL(mm

Ir

(A)

WV uF

Case Size

DxL(mm

1000 22x26 0.84 680 22x26 0.70 470 22x26 0.63 330 22x26 0.54

22x31 1.10 22x26 22x31 22x31

1500

25x26

1000

25x26

0.85 680
25x26

0.84 470

1800 22x31 1.54 1200 22x26 0.98 820 22x31 1.02 560 25x26 0.96

22x31 1.65 22x31 22x36 22x31

2200

25x26 25x26 25x31 25x26
30x26

1500

30x26

1.10 1000

1.16 680

30x26

22x36 22x31 22x36 22x31

2700

25x31

1.94 1800
25x26

1.40 1200
25x31

1.46 820

22x36 22x36 22x41 22x36

3300

25x31 25x31 25x36 25x31
30x26

2.24 2200
30x26

1.65 1500

1.74 1000

30x31

22x41 22x41 22x46 22x41

3900

25x36 25x36 25x41 25x36

2.54 2700

2.07 1800

1.95 1200

Ir

(A)

0.79

25x26

1.02

30x26

1.24

25x26

1.38

30x26

1.65

50

4700

5600

6800

8200

10000

30x31

30x26

30x31

30x31

22x46 22x51 25x51 22x46

63

100

25x41 25x41 25x46 25x41

2.95 3300

2.48 2200

2.25 1500

1.83

30x31 30x31 30x36 30x31
35x27

35x27

35x32

35x27
22x51 25x46 25x51 25x41
25x46 30x36 30x41 30x36

3900

3.05 2700

2.68 1800

2.52

3.10

30x41
35x32
25x51 30x41 30x51 30x41
30x41

3.26

4700

35x32

5600

30x46

35x32

35x37

35x32

25x51 25x56 25x51

35x32

3.43 3300
35x42

3.30 2200
35x32

3.03

30x46 30x51 30x46
35x37

3.86 3900
35x42

3.85 2700
35x37

4.10

3.58

35x37

6800

30x51

30x51 30x51 30x56
35x42

4.64 4700
35x42

4.29 3300
35x47

4.59

4.11

35x42

8200 35x47 5.05 5600 35x47 5.10 3900 35x47 4.98
12000 35x47 4.62 10000 35x52 5.75 6800 35x52 5.66 4700 35x52 5.43
15000 35x52 5.05

80

WV uF

Case Size

Ø DxL(mm)

Ir

WV uF

(A)

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

Ir

(A)

WV uF

Case Size

Ø DxL(mm)

220 22x26 0.65 100 22x26 0.38 68 22x26 0.27 33 22x26 0.39 33 22x26 0.40
270 22x26 0.74 22x26 22x31 22x26 22x31

22x31

330

25x26 22x31 22x31 56 22x31 0.68 22x31
30x26

0.98
220

22x36

390

1.10

25x31

25x26

25x26 25x26 22x31 5625x26
30x26
22x31 22x31 6830x26

270

150

22x36

470

1.21

25x31
22x41 25x31 25x31 22x36 25x31

560

25x36

1.40

330

30x31
22x46 25x36 25x36 22x36 0.90 25x31

390

25x41

680

1.64

25x26
22x36 22x36 8225x31

30x26
22x41 22x41

30x31

30x36 22x46 22x46

0.54 100

0.92 150

1.03 180

1.21 220

1.39 270

25x26

30x26

25x26

30x26

30x31

0.44 47

0.60

0.69

1.00
100

1.16
120

25x26

25x26 22x36

0.72

22x36

68

25x26

25x31
30x26

0.82
22x36

82

0.56 47

25x31
30x26

0.82

30x26
22x41

100

22x31

30x31

30x26 22x46

Ir

(A)

0.60

0.70

0.80

0.88

0.90

160

1000

35x32

470

25x46 30x31 30x31 25x41

820

30x36

200

1.85
35x32
25x51 25x41 25x36 30x36

560

25x41 25x36 22x46 25x41

1.62 330
250

35x26
22x51 22x46 25x46 25x41

1.85 390

2.15

30x41

30x36

25x56 22x56 25x46 25x51 30x41

1200

30x46
30x51

1500

35x42
30x51 30x41 30x41

1800

35x42

2.46

2.80

3.13

680

820

25x51 30x36 30x41

2.04 470

30x36
25x56 25x51 30x46

2.34 560

35x37

2200 35x52 3.39 30x51 30x46

1000

35x42

2.70 680

30x51 30x51 470 35x52 1.98

1200

35x42

3.00 820

35x26

30x31

35x32

35x32

35x37

35x42

1.28
400

150

1.48 180

1.76 220

270

1.93

330

2.22

390 35x47 1.74 390 35x52 1.86

2.48

560 35x52 2.23

30x31

35x32

35x32

35x37
30x51
35x42

0.98

1.14

1.21

1.40

1.57

120

450

30x31
22x51

150

30x36
25x51

180

35x32
30x46

220

35x37
30x51

270

35x42

330 35x47 1.64

1.00

1.05

1.14

1.24

1.48

1500 35x52 3.43 1000 35x47 2.80

1800 35x52 4.01

1200 35x52 3.17

TTaappiinngg

Fig.1:Formed Fig.2: Straight

Specification Information:

Code D A d P P0 P1 P2 F W W0 W1 W2 H H0 D0 I t

Tol ±0.5 ±1.0 ±0.05 ±1.0 ±0.2 ±0.7 ±1.3

4-6 7.0 0.45 12.7 12.7 3.85 6.35 5.0 18 12.5 9.0 3.0 18.5 16.0 4.0 1.0 0.7 2.0
5-8 12.5 0.5 12.7 12.7 3.85 6.35 5.0 18 12.5 9.0 3.0 18.5 16.0 4.0 1.0 0.7 2.0

+0.8

±0.5 Min ±0.5 Max ±0.75 ±0.5 ±0.2 Max ±0.2 Max Fig

-0.2

△h

1

Item

Package Information:

Case Diameter D

Ammunition Style Package Reel Style Package

5,6 12.5 0.5 12.7 12.7 5.1 6.35 2.5 18 12.5 9.0 3.0 18.5 - 4.0 1.0 0.7 2.0

8 12.5 0.5 12.7 12.7 4.6 6.35 3.5 18 12.5 9.0 3.0 18.5 - 4.0 1.0 0.7 2.0
10 21.0 0.69 12.7 12.7 3.85 6.35 5.0 18 12.5 9.0 3.0 18.5 - 4.0 1.0 0.7 2.0
13 26.0 0.6 15.0 15.0 5.0 7.5 5.0 18 12.5 9.0 3.0 18.5 - 4.0 1.0 0.7 2.0

Ammunition Style Reel Style

Ø(mm)

4 218 50 2500 44 1800
5 285 50 2500 44 1500
6 285 50 2000 44 1000

8 240 55 1000 44 800
10 300 55 800 44 600
13 285 62 500 - -

A W Q’ ty Pcs W Q’ ty Pcs

2

電解電容器製造及品質管制流程圖
ALUMINUM ELECTROLYTIC CAPACITOR PROCESS & QUALITY CONTROL FLOW CHART

電解電容器製造及品質管制流程圖

ALUMINUM ELECTROLYTIC CAPACITOR PROCESS & QUALITY CONTROL FLOW CHART

電解電容器製造及品質管制流程圖

ALUMINUM ELECTROLYTIC CAPACITOR PROCESS & QUALITY CONTROL FLOW CHAR

Features

z85℃ 2000hurs assured.

STG Chip, General Prupose,85℃

zLead free reflow soldering is available.

Specifications.

Item Performance
Operating T emperat ure Range -40℃ to +85℃
Capacitance T olerance ±20% (at 120Hz, 20℃)
Surge Voltage (V) (20℃)

Leakage Current (at 20℃)

Dissipation Factor (Tan δ at 120Hz, 20℃)

WV 4 6.3 10 16 25 35 50 63 100 160 200 250 400 450

SV 5 8 13 20 32 44 63 79 125 200 250 300 450 500

4~100V 4~10 Ø 1=0.01CV or 3 uA, whichever is greater, after 2 minutes at +20

12.5~16Ø 1=0.03CV or 4 uA, whichever is greater, after 1 minute at +20℃
160~450V 12.5~16Ø 1=0.04CV +100uA, after 1 minute at +20℃

Where 1=leakage current, C= rated capacitance in uF, V= rated DC working voltage in V

Shown in the table of standard rating

Low Temperature Characteristic (at 120Hz) Impedance ratio shall not exceed the values given in the table below.

Rated Voltage (V) 4 6.3 10 16 25 35 50 63 100 160~250 400~450

4~10 Ø 7 4 3 2 2 2 2 2 3 - - Z(-25℃)

/Z(+20℃)

Z(-40℃)

/Z(+20℃)

Test Time 2000 Hrs
Case code 4~6.3 Ø 8~16 Ø

12.5~16 Ø - 5 4 3 2 2 2 2 2 3 6
ØD≦10 15 12 8 6 4 3 3 3 4 - -
ØD≧10 - 10 8 6 4 3 3 3 3 6 10

Load Life Test

Impedance

Ratio

Capacitance Change Within ±25% of initial value Within ±20% of initial value

Dissipation Factor Less than 200% of specified value

Leakage current Within specified value

＊The above specifications shall be satisfied when the capacitors are restored to 20℃

after the rated voltage applied with rated ripple current for 2000hours at 85℃

Shelf Life Test Without Voltage Test time 1000hrs; other items are the same as those for the load life test

℃

Diagram of Dimensions: (Unit:mm)

ØD L A B C W P Fig No.
4 5.4±0.3 4.3 4.3 2.0 0.5~0.8 1.0 1
5 5.4±0.3 5.3 5.3 2.3 0.5~0.8 1.5 1

6.3 5.4±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1

6.3 7.7±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1
8 6.2±0.3 8.3 8.3 3.4 0.5~0.8 2.2 1
8 10.2±0.5 8.3 8.3 3.4 0.7~1.1 3.1 1
10 10.2±0.5 10.4 10.4 3.3 0.7~1.1 4.6 1

12.5 13.5±0.5 12.8 12.8 4.9 1.1~1.4 4.6 2

12.5 16±0.5 12.8 12.8 4.9 1.1~1.4 4.6 2
16 16.5±0.5 16.3 16.3 5.8 1.8~2.2 6.0 2

Multiplier For Ripple Current VS. Frequency

CAP

Freq(Hz)

0.1~4.7 uF 0.8 1.0 1.20 1.30 1.50 Multiplier
68~1000uF 0.8 1.0 1.10 1.15 1.20

50(60) 120 500 1K 10K UP

Case Size

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

22 4x5.4 ±20 0.35 19
33 4x5.4 ±20 0.35 26

4

6.3

10

16

47 4x5.4 ±20 0.35 34
100 5x5.4 ±20 0.35 61
220 6.3x5.4 ±20 0.35 82

22 4x5.4 ±20 0.35 20

33

47

100

220

330
470 8x10.2 ±20 0.35 380

1000

22 4x5.4 ±20 0.30 28

33

47 5x5.4 ±20 0.26 43
100

220
330 8x10.2 ±20 0.26 320
470

1000 10x10.2 ±20 0.26 710

4.7 4x5.4 ±20 0.24 20
10 4x5.4 ±20 0.24 22

22

33

47

100

220

330

470

4x5.4 ±20 0.35 28
5x5.4 ±20 0.35 33
4x5.4 ±20 0.35 36
5x5.4 ±20 0.35 46
5x5.4 ±20 0.35 65

6.3x5.4 ±20 0.35 71

6.3x5.4 ±20 0.35 110

6.3x7.7 ±20 0.35 130
8x6.2 ±20 0.35 230

6.3x7.7 ±20 0.35 270
8x6.2 ±20 0.35 300

8x10.2 ±20 0.35 500

10x10.2 ±20 0.30 700

4x5.4 ±20 0.30 29
5x5.4 ±20 0.30 43

6.3x5.4 ±20 0.26 70
8x6.2 ±20 0.26 76

6.3x7.7 ±20 0.26 173
8x6.2 ±20 0.26 250

8x10.2 ±20 0.26 390

10x10.2 ±20 0.26 400

4x5.4 ±20 0.24 31
5x5.4 ±20 0.24 39
5x5.4 ±20 0.24 45

6.3x5.4 ±20 0.24 63
5x5.4 ±20 0.24 58

6.3x5.4 ±20 0.24 70

6.3x5.4 ±20 0.24 80
8x6.2 ±20 0.24 90

6.3x7.7 ±20 0.24 180

8x10.2 ±20 0.24 220
8x10.2 ±20 0.24 320

10x10.2 ±20 0.24 340

8x10.2 ±20 0.24 400

10x10.2 ±20 0.24 420

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

4.7 4x5.4 ±20 0.16 22
4x5.4 ±20 0.16 22
5x5.4 ±20 0.16 28
5x5.4 ±20 0.16 35

6.3x5.4 ±20 0.16 55
5x5.4 ±20 0.16 42

6.3x5.4 ±20 0.16 65

6.3x5.4 ±20 0.16 70
8x6.2 ±20 0.16 89

6.3x7.7 ±20 0.16 120
8x6.2 ±20 0.16 135

8x10.2 ±20 0.16 170
8x10.2 ±20 0.16 230

10x10.2 ±20 0.16 310

8x10.2 ±20 0.16 320

10x10.2 ±20 0.16 360

4x5.4 ±20 0.14 22
5x5.4 ±20 0.14 30

6.3x5.4 ±20 0.14 60
8x6.2 ±20 0.14 70

6.3x7.7 ±20 0.14 90
8x6.2 ±20 0.14 103

6.3x7.7 ±20 0.14 132

8x10.2 ±20 0.14 170

10x10.2 ±20 0.14 190

8x10.2 ±20 0.14 340

10x10.2 ±20 0.14 410

4x5.4 ±20 0.12 18
5x5.4 ±20 0.12 23
5x5.4 ±20 0.12 27

6.3x5.4 ±20 0.12 35

6.3x5.4 ±20 0.12 50

6.3x7.7 ±20 0.12 60
8x6.2 ±20 0.12 65

6.3x7.7 ±20 0.12 65
8x6.2 ±20 0.12 70

8x10.2 ±20 0.12 80

6.3x7.7 ±20 0.12 105
8x6.2 ±20 0.12 110

8x10.2 ±20 0.12 120

10x10.2 ±20 0.12 130

8x10.2 ±20 0.12 220

10x10.2 ±20 0.12 240

25

35

50

10

22

33

47

100

220

330
470 10x10.2 ±20 0.16 450

2.2 4x5.4 ±20 0.14 8

3.3 4x5.4 ±20 0.14 10

4.7 4x5.4 ±20 0.14 22
10
22 6.3x5.4 ±20 0.14 60
33

47

100

220

0.1 4x5.4 ±20 0.12 1

0.22 4x5.4 ±20 0.12 2

0.33 4x5.4 ±20 0.12 3

0.47 4x5.4 ±20 0.12 5
1 4x5.4 ±20 0.12 10

2.2 4x5.4 ±20 0.12 14

3.3 4x5.4 ±20 0.12 16

4.7

10

22

33

47

100
220 10x10.2 ±20 0.12 450

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

0.1 4x5.4 ±20 0.12 1.3

0.22 4x5.4 ±20 0.12 3

0.33 4x5.4 ±20 0.12 4

0.47 4x5.4 ±20 0.12 5
1 4x5.4 ±20 0.12 8

2.2 4x5.4 ±20 0.12 12

3.3 4x5.4 ±20 0.12 17
5x5.4 ±20 0.12 20

6.3x5.4 ±20 0.12 27

6.3x5.4 ±20 0.12 38
8x6.2 ±20 0.12 56

6.3x7.7 ±20 0.12 60

8x10.2 ±20 0.12 65

6.3x7.7 ±20 0.12 70

8x10.2 ±20 0.12 100

10x10.2 ±20 0.12 260

12.5x13.5 ±20 0.14 300

8x10.2 ±20 0.12 90

10x10.2 ±20 0.12 90

63

100

160

200

250

400

450

4.7

10

22

33
47 8x10.2 ±20 0.12 145

68 10x10.2 ±20 0.12 190
100
220 12.5x13.5 ±20 0.14 500

330 12.5x16 ±20 0.14 680
470 16x16.5 ±20 0.14 850

3.3 8x10.2 ±20 0.12 30

4.7 8x10.2 ±20 0.12 50
10 8x10.2 ±20 0.12 55

22
33 10x10.2 ±20 0.12 120

47 10x10.2 ±20 0.12 200
68 12.5x13.5 ±20 0.12 280

100 12.5x13.5 ±20 0.12 380
220 16x16.5 ±20 0.12 500

33 12.5x13.5 ±20 0.20 240
47 12.5x16 ±20 0.20 300
68 16x16.5 ±20 0.20 400
22 12.5x13.5 ±20 0.20 220
33 12.5x16 ±20 0.20 300
47 16x16.5 ±20 0.20 320
68 16x16.5 ±20 0.20 340
10 12.5x13.5 ±20 0.20 105
22 12.5x13.5 ±20 0.20 150
33 12.5x16 ±20 0.20 240
47 16x16.5 ±20 0.20 330

4.7 12.5x13.5 ±20 0.25 90
10 12.5x13.5 ±20 0.25 110
22 16x16.5 ±20 0.25 120
33 16x16.5 ±20 0.25 140

4.7 12.5x13.5 ±20 0.25 120
10 12.5x16 ±20 0.25 130
22 16x16.5 ±20 0.25 140

STK Chip, General Purpose, 105℃

Features

z105℃ 1000~2000 hours assured.

zLead free reflow soldering is available.

Specifications

Item Performance
Operating Tem perature Range -40℃ to +105℃
Capacitance T oleranc e ±20% (at 120Hz, 20℃)

Leakage Current (at 20℃)

Surge Voltage (V) (20℃)

Dissipation Factor (Tan δ at
120Hz, 20℃)
Low Tem perature
Characteristics (at 120Hz)

Load Life Test

Shelf Life Test Without Voltage Test time 1000 hrs; other items are the same as those for the load life test.

Diagram of Dimensions: (Unit:mm)

4~100V 4~10Ø 1=0.01CV or 3uA, whichever is greater, after 2 minutes at +20℃

12.5~16Ø 1=0.03CV or 4uA, whichever is greater, after 1 minutes at +20℃
160~450V 12.5~16Ø 1=0.04CV +100uA after 1 minutes at +20℃

Where 1=leakage current C=rated capacitance in uF. V=rated DC working voltage in V.

WV 4 6.3 10 16 25 35 50 63 100 160 200 250 400 450
SV 5 8 13 20 32 44 63 79 125 200 250 300 450 500

Shown in the table of standard rating.

Impedance ratio shall not exceed the values given in the table below.

Rated Voltage (V) 4 6.3 10 16 25 35 50 63 100 160~250 400~450

4~10 Ø 74322222 3 - - Z(-25℃)

Impedance

Ratio

Capacitance Change Within ±25% of initial value Within ±20% of initial value

Dissipation Factor Less than 200% of specified value

Leakage current Within specified value

＊ The above specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage
supplied with rated ripple current for 2000 hours at 105℃

/Z(+20℃)

Z(-40℃)

/Z(+20℃)

Test Time 1000~2000 Hrs
Case code 4~6.3 Ø 8~16 Ø

12.5~16 Ø -5432222 2 3 6
4~10 Ø 1512864333 4 - -

12.5~16 Ø -10864333 3 6 10

ØD L A B C W P Fig No.
4 5.4±0.3 4.3 4.3 2.0 0.5~0.8 1.0 1
5 5.4±0.3 5.3 5.3 2.3 0.5~0.8 1.5 1

6.3 5.4±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1

6.3 7.7±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1
8 6.2±0.3 8.3 8.3 3.4 0.5~0.8 2.2 1
8 10.2±0.5 8.3 8.3 3.4 0.7~1.1 3.1 1
10 10.2±0.5 10.4 10.4 3.3 0.7~1.1 4.6 1

12.5 13.5±0.5 12.8 12.8 4.9 1.1~1.4 4.6 2

12.5 16±0.5 12.8 12.8 4.9 1.1~1.4 4.6 2
16 16.5±0.5 16.3 16.3 5.8 1.8~2.2 6.0 2

Multiplier For Ripple Current VS. Frequency

CAP

Freq(Hz)

0.1~4.7 uF 0.8 1.0 1.20 1.30 1.50
68 uF UP 0.8 1.0 1.10 1.15 1.20

50(60) 120 500 1K 10K UP

Case Size

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

22 4x5.4 ±20 0.35 20
33 4x5.4 ±20 0.35 26

4

6.3

10

16

47 4x5.4 ±20 0.35 34
100 5x5.4 ±20 0.35 61
220 6.3x5.4 ±20 0.35 68

22 4x5.4 ±20 0.35 29

33 4x5.4 ±20 0.35 43

47 5x5.4 ±20 0.35 46
100 6.3x5.4 ±20 0.35 71

220
330 8x10.2 ±20 0.35 230
470

1000 10x10.2 ±20 0.35 380
2200 12.5x13.5 ±20 0.40 680
3300 12.5x16 ±20 0.40 850
4700 16x16.5 ±20 0.40 1000
6800 16x16.5 ±20 0.40 1000

22 4x5.4 ±20 0.30 25

33 4x5.4 ±20 0.30 40

47 6.3x5.4 ±20 0.30 50
100

220

330

470

1000 10x10.2 ±20 0.26 390
2200 12.5x13.5 ±20 0.38 750
3300 16x16.5 ±20 0.38 1000
4700 16x16.5 ±20 0.38 1000

10 4x5.4 ±20 0.22 17

22 5x5.4 ±20 0.22 30

33 6.3x5.4 ±20 0.22 45

47 6.3x5.4 ±20 0.22 48

100

220

330

470

1000 12.5x13.5 ±20 0.34 550
2200 16x16.5 ±20 0.34 950
3300 16x16.5 ±20 0.34 950

6.3x7.7 ±20 0.35 120
8x6.2 ±20 0.35 130

8x10.2 ±20 0.35 250

10x10.2 ±20 0.35 260

6.3x5.4 ±20 0.30 70
8x6.2 ±20 0.30 75

6.3x7.7 ±20 0.30 120

8x10.2 ±20 0.26 125
8x10.2 ±20 0.26 230

10x10.2 ±20 0.26 240

8x10.2 ±20 0.26 260

10x10.2 ±20 0.26 300

6.3x5.4 ±20 0.22 69

6.3x7.7 ±20 0.22 74
8x6.2 ±20 0.22 80

8x10.2 ±20 0.22 85

6.3x7.7 ±20 0.22 170

10x10.2 ±20 0.22 210

8x10.2 ±20 0.22 240

10x10.2 ±20 0.22 245

8x10.2 ±20 0.22 280

10x10.2 ±20 0.22 320

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

25 4.7 4x5.4 ±20 0.16 13
10 5x5.4 ±20 0.16 23
22 6.3x5.4 ±20 0.16 38
33 6.3x5.4 ±20 0.16 50
47 6.3x5.4 ±20 0.16 60

6.3x7.7 ±20 0.16 65
8x6.2 ±20 0.16 67
100 6.3x7.7 ±20 0.16 100
8x10.2 ±20 0.16 105
220 8x10.2 ±20 0.16 230
10x10.2 ±20 0.16 273
330 10x10.2 ±20 0.16 340
470 10x10.2 ±20 0.16 470
1000 12.5x16 ±20 0.26 550
2200 16x16.5 ±20 0.26 820
35 4.7 4x5.4 ±20 0.14 16
10 5x5.4 ±20 0.14 27
22 6.3x5.4 ±20 0.14 44
33 6.3x5.4 ±20 0.14 54

6.3x7.7 ±20 0.14 57
8x6.2 ±20 0.14 60
47 8x10.2 ±20 0.14 80
10x10.2 ±20 0.14 88
100 8x10.2 ±20 0.14 140
10x10.2 ±20 0.14 190
220 8x10.2 ±20 0.14 280
10x10.2 ±20 0.14 360
330 10x10.2 ±20 0.14 450
470 12.5x13.5 ±20 0.22 520
1000 16x16.5 ±20 0.22 750
50 0.1 4x5.4 ±20 0.12 1

0.22 4x5.4 ±20 0.12 2

0.33 4x5.4 ±20 0.12 3

0.47 4x5.4 ±20 0.12 5
1 4x5.4 ±20 0.12 10

2.2 4x5.4 ±20 0.12 16

3.3 4x5.4 ±20 0.12 16

4.7 5x5.4 ±20 0.12 20
10 6.3x5.4 ±20 0.12 32
22 6.3x5.4 ±20 0.12 40

6.3x7.7 ±20 0.12 47
8x6.2 ±20 0.12 52
33 6.3x7.7 ±20 0.12 65
8x10.2 ±20 0.12 70
47 8x10.2 ±20 0.12 80
10x10.2 ±20 0.12 100
100 8x10.2 ±20 0.12 210
10x10.2 ±20 0.12 230
220 10x10.2 ±20 0.14 375
330 12.5x13.5 ±20 0.14 500
470 12.5x16 ±20 0.14 550

WV Cap (uF) Size (mm) φDxL Tol (%) DF(%)(max) 120Hz, 20℃ RC. (mA, rms) (max) 120Hz, 105℃

63 0.47 4x5.4 ±20 0.12 5
1 4x5.4 ±20 0.12 8

2.2 4x5.4 ±20 0.12 12

3.3 4x5.4 ±20 0.12 17

4.7 6.3x5.4 ±20 0.12 22
10 6.3x5.4 ±20 0.12 32
22 6.3x7.7 ±20 0.12 58
8x10.2 ±20 0.12 60
33 8x10.2 ±20 0.12 100
10x10.2 ±20 0.12 130
47 8x10.2 ±20 0.12 140
10x10.2 ±20 0.12 170
100 10x10.2 ±20 0.12 310
220 12.5x13.5 ±20 0.14 470
330 16x16.5 ±20 0.14 700
470 16x16.5 ±20 0.14 700
100 10 8x10.2 ±20 0.12 55
22 8x10.2 ±20 0.12 90
10x10.2 ±20 0.12 100
33 10x10.2 ±20 0.12 150
47 12.5x13.5 ±20 0.14 250
100 12.5x13.5 ±20 0.14 380
220 16x16.5 ±20 0.14 450
160 33 12.5x13.5 ±20 0.20 95
47 12.5x16 ±20 0.20 110
100 16x16.5 ±20 0.20 190
200 10 12.5x13.5 ±20 0.20 80
22 12.5x13.5 ±20 0.20 90
33 12.5x16 ±20 0.20 110
47 16x16.5 ±20 0.20 220
250 3.3 12.5x13.5 ±20 0.20 65

4.7 12.5x13.5 ±20 0.20 68
10 12.5x13.5 ±20 0.20 72
22 12.5x13.5 ±20 0.20 90
33 16x16.5 ±20 0.20 150
47 16x16.5 ±20 0.20 180
400 4.7 12.5x13.5 ±20 0.25 50
10 12.5x13.5 ±20 0.25 65
22 16x16.5 ±20 0.25 85
450 3.3 12.5x13.5 ±20 0.25 40

4.7 12.5x13.5 ±20 0.25 50
10 12.5x16 ±20 0.25 55
22 16x16.5 ±20 0.25 85

STR Chip, Low Impedance & ESR, 105℃

Features
Load life: 105℃ 1000~2000 hours.

For high density mounting.
Low impedance at 100kHz.
Specifications

Item Performance
Operating T emperat ure Range -40℃ to +105℃
Rated Working V ol tage 6.3~50VDC
Capacitance T olerance ±20% (at 120Hz, 20℃)
Leakage Current (at 20℃) 1≦0.01 CV or 3(uA) whichever is greater (after 2 minutes)

Where, C=rated capacitance in uF, V=rated DC working voltage in V.

Surge Voltage (at 20℃)

Dissipation Factor (Tan δ at 120Hz,
20℃)

Low temperature Stability Impedance ratio at 120Hz

Load Life Test ＊ After hours (ØD≦6.3mm 1000hours, ØD≦8mm 2000 hours) application of WV at +105

Shelf Life Test Without Voltage Test time: 1000hrs; other items are the same as those for the load life test.
Standards Satisfies Characteristic W of JIS C 5141

W.V. 6.3 10 16 25 35 50

S.V. 8 13 20 32 44 63

Rated Voltage 6.3 10 16 25 35 50

Tan δ (max)

Add 0.02 per 1000uF for more than 1000uF

Rated Voltage(V) 6.3 10 16 25 35 50

Impedance Ratio

℃ the capacitor shall meet the following limits.
Capacitance Change ≦±25% of initial value
Dissipation Factor Less than 200% of specified value
Leakage Current With specified value

Ø4~Ø6.3 0.24 0.20 0.16 0.14 0.12 0.12

Ø8~Ø10 0.28 0.24 0.20 0.16 0.14 0.14

Z(-25℃)/Z(+20℃) 3 2 2 2 2 2
Z(-40℃)/Z(+20℃) 5 4 4 3 3 3

Diagram of Dimensions: (Unit: mm)

ØD L A B C W P Fig No.

4 5.4±0.3 4.3 4.3 2.0 0.5~0.8 1.0 1
5 5.4±0.3 5.3 5.3 2.3 0.5~0.8 1.5 1

6.3 5.4±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1

6.3 7.7±0.3 6.6 6.6 2.7 0.5~0.8 2.0 1
8 10.2±0.3 8.3 8.3 3.4 0.7~1.1 3.1 1

10 10.2±0.3 10.3 10.3 3.5 0.7~1.1 4.6 1

Multiplier For Ripple Current V.S. Frequency

Freq. (Hz)

V.D C(V)

6.3~50 0.55 0.65 0.85 0.90 1.00

50(60) 120 1K 10K 100K

Case Size

WV Cap (uF) Size (mm) φDxL Imp. (Ω) 100KHz, 20℃ RC. (mA, rms) (max) 100KHz, 105℃

22 4x5.4 1.80 80
33 5x5.4 0.76 150
47 5x5.4 0.76 150
56 5x5.4 0.76 150
68 6.3x5.4 0.44 230

100 6.3x5.4 0.44 230

6.3

10

16

150 6.3x5.4 0.44 230
220 6.3x7.7 0.44 230
330 6.3x7.7 0.34 280
470 8x10.2 0.17 450

680 8x10.2 0.17 450
1000 8x10.2 0.17 450
1500 10x10.2 0.09 670

22 4x5.4 1.80 80
27 5x5.4 0.76 150
33 5x5.4 0.76 150
47 6.3x5.4 0.44 230
56 6.3x5.4 0.44 230

68 6.3x5.4 0.44 230
100 6.3x5.4 0.44 230
150 6.3x5.4 0.44 230
220 6.3x7.7 0.34 280
330 8x10.2 0.17 450
470 8x10.2 0.17 450
680 10x10.2 0.09 670

1000 10x10.2 0.09 670

10 4x5.4 1.80 80

15 4x5.4 1.80 80

22 5x5.4 0.76 150

27 5x5.4 0.76 150

33 6.3x5.4 0.44 230

47 6.3x5.4 0.44 230

56 6.3x5.4 0.44 230

68 6.3x5.4 0.44 230
100 6.3x5.4 0.44 230
150 6.3x7.7 0.34 280
220 6.3x7.7 0.34 280
330 8x10.2 0.17 450
470 8x10.2 0.17 450
680 10x10.2 0.09 670

WV Cap (uF) Size (mm) φDxL Imp. (Ω) 100KHz, 20℃ RC. (mA, rms) (max) 100KHz, 105℃

25 10 4x5.4 1.80 80

15 5x5.4 0.76 150
22 5x5.4 0.76 150
27 6.3x5.4 0.44 230
33 6.3x5.4 0.44 230
47 6.3x5.4 0.44 230
56 6.3x5.4 0.44 230
68 6.3x5.4 0.44 230
100 6.3x7.7 0.34 280
150 8x10.2 0.17 450
220 8x10.2 0.17 450
330 8x10.2 0.17 450
470 10x10.2 0.9 670

35 4.7 4x5.4 1.80 80

6.8 5x5.4 1.20 120
10 5x5.4 0.76 150
15 5x5.4 0.76 150
22 5x5.4 0.76 150
27 6.3x5.4 0.44 230
33 6.3x5.4 0.44 230
47 6.3x5.4 0.44 230
56 6.3x7.7 0.34 280
68 6.3x7.7 0.34 280
100 8x10.2 0.17 450
150 8x10.2 0.17 450
220 8x10.2 0.17 450
330 10x10.2 0.09 670

50 1.0 4x5.4 5.00 30

2.2 4x5.4 5.00 30

3.3 4x5.4 5.00 30

4.7 5x5.4 1.52 85

6.8 5x5.4 1.20 120
10 6.3x5.4 0.88 165
15 6.3x5.4 0.88 165
22 6.3x5.4 0.88 165
27 6.3x7.7 0.68 185
33 6.3x7.7 0.68 185
47 6.3x7.7 0.68 185
56 8x10.2 0.34 300
68 8x10.2 0.34 300
100 8x10.2 0.34 300
150 10x10.2 0.18 670
220 10x10.2 0.18 670

CODE

□□□ □□□□□ □□□ □□ ━ □

SMD TYPE & Code Capacitance (uF) Rated Voltage (V) Size & Code Production Line
General Purpose, 85℃
General Purpose, 105℃

Low Impedance & ESR STR 0.33 10 6.3*5.4 D1 G

0.47 16 6.3*7.7 D2 P

STG 0.1 4 4*5.4 B A
STK 0.22 6.3 5*5.4 C C

1 25 8*6.2 E L

2.2 35 8*10.2 F

3.3 40 10*10.2 G

4.7 50 12.5*13.5 H
10 63 12.5*16 H1
22 80 16*16.5 I
33 100
47 160
68 200
82 250

100 350
150 400

━

180 450
220
330
470
560

680
1000
2200
3300
4700

Carrier T ape

Unit: mm

φ DxL A B φ d F P P1 P2 t1 t2 W1 W2 Fig. No.

4x5.3 5.0 5.0 1.5 5.5 8 2.0 4.0 0.4 5.8 12.0 1.75 1-1
4x5.7 5.0 5.0 1.5 5.5 8 2.0 4.0 0.4 6.2 12.0 1.75 1-1
5x5.3 6.0 6.0 1.5 5.5 12 2.0 4.0 0.4 5.8 12.0 1.75 1-1
5x5.7 6.0 6.0 1.5 5.5 21 2.0 4.0 0.4 6.2 12.0 1.75 1-1

6.3x5.3 7.0 7.0 1.5 7.5 12 2.0 4.0 0.4 5.8 16.0 1.75 1-2

6.3x5.7 7.0 7.0 1.5 7.5 12 2.0 4.0 0.4 6.2 16.0 1.75 1-2

6.3x6.0 7.0 7.0 1.5 7.5 12 2.0 4.0 0.4 6.2 16.0 1.75 1-2

6.3x7.0 7.0 7.0 1.5 7.5 12 2.0 4.0 0.4 6.8 16.0 1.75 1-2

6.3x7.7 7.0 7.0 1.5 7.5 12 2.0 4.0 0.4 8.3 16.0 1.75 1-2
8x6.5 8.7 8.7 1.5 7.5 12 2.0 4.0 0.4 6.8 16.0 1.75 1-2
8x7.0 8.7 8.7 1.5 7.5 12 2.0 4.0 0.4 6.8 16.0 1.75 1-2
8x10 8.7 8.7 1.5 11.5 16 2.0 4.0 0.4 11.0 16.0 1.75 1-2

8x11.8 8.7 8.7 1.5 7.5 12 2.0 4.0 0.4 13.0 16.0 1.75 1-2

10x8.0 10.7 10.7 1.5 11.5 16 2.0 4.0 0.4 10.0 24.0 1.75 1-2

10x10 10.7 10.7 1.5 11.5 16 2.0 4.0 0.4 11.0 24.0 1.75 1-2

10x12.7 10.7 10.7 1.5 11.5 16 2.0 4.0 0.4 14.0 24.0 1.75 1-2

12.5x13.5 13.4 13.4 1.5 14.2 24 2.0 4.0 0.5 14.0 32.0 1.75 1-3

12.5x16 13.4 13.4 1.5 14.2 24 2.0 4.0 0.5 17.5 32.0 1.75 1-3
16x16.5 17.5 17.5 1.5 20.2 28 2.0 4.0 0.5 17.5 44.0 1.75 1-3

Tol. ±0.2 ±0.2 +0.1/-0 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.2 ±0.3 ±0.15

Reel Package

Unit:mm

Ø DxL 4 5 6.3 8X 6. 5~ 7.0 8X10~ 11.8 10 12.5 16

W 14 14 18 18 26 26 34 46

A 380 380 380 380 380 380 380/450 380/450

t 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0