Samcon LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
u
e
S
EMT
● Enduarnce with ripple current: 105℃ 6000 hours
● Non solvent-proof type
◆ SPECIFICATIONS
ItemCharacteristics
Category Temperature Range
Voltage Range
Nominal Cap. Range
Capacitance Tolerance
Leakage Current
Dissipation Factor(tanδ)
(at 120Hz,20℃)
Low Temp. ImpedanceRated voltage(V.DC)
Stability at 120HzZ - 25℃ /Z + 20℃
High Temp. Load Test
High Temp. Non-Load Test
I≦3√CV
I: Leakage Current (μA) C: Nominal Capacitance (μF) V: Rated Voltage (V)
Rated voltage(V.DC)160 to 400V
tanδ(max)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage
with the rated ripple current is applied for 6000 hours at 105℃.
Capacitance Change
tanδ
Leakage Current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing
them for 1000 hours at 105℃ without voltage applied.
Capacitance Change
tanδ≦150% of the initial specified value
Leakage Current
RoHS
compliance
-25~+105℃
160 ~ 450V.DC
47 ~ 2200 μF
±20%(M) 20℃, 120Hz
0.20
160 to 400V
4
≦±20% of the initial measured val
≦ 250% of the initial specified valu
≦ the initial specified value
≦±15% of the initial measured value
≦ the initial specified value
(at 20℃ after 5min.)
420&450V
0.2
420&450V
8
P. V. C Sleeve
L± 2
6. 3
±1
nap- i n t er minal
Φ D ± 1
1
0
±
1
●PERMISSIBLE RIPPLE CURRENT MULTIPLIES
⊙Frequency Multipliers