General Purpose Relays
1
SCHRACK
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
Miniature Power PCB RY II & RY II reflow-solderable
I
1 pole 8 A, 1 CO or 1 NO or 1 NC contact
I
Low component height 12.3 mm
I
5 kV / 8 mm coil-contact
I
Reinforced insulation (protection class II)
I
Pinnings: 3.2 and 5 mm
I
reflow-solderable version
I
Sockets with PCB-type terminals
I
Especially suitable for resistive and inductive loads on NO and NC contacts
I
Plastic materials according to IEC60335-1 (domestic appliances)
(not at reflow-solderable version)
I
RoHS compliant (Directive 2002/95/EC) as per product date code 0403
Applications: heating control, interface technology, domestic appliances, timers,
temperature control
Approvals
V REG.-Nr. 5358, Z E214025
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1NO or 1NC
Contact set single contact
Type of interruption micro disconnection
Rated current 8 A
Rated voltage / max. switching voltage AC 250/400 VAC
Maximum breaking capacity AC 2000 VA
Contact material AgNi0,15, AgSnO2, AgCdO
Mechanical endurance 30x106cycles
Rated frequency of operation with / without load 6 / 1200 min
-1
Contact ratings
Type Load Cycles
RY**1*** NO, 8 A, 250 VAC, resistive, 70°C 1x10
5
RY**1*** NC, 8 A, 250 VAC, resistive, 70°C 5x10
4
RY**(0,1,2)*** 8 A, 30 VDC, UL 508 3 x10
4
RY**(0,1,2)*** 0,28 A, 250 VDC, UL 508 3 x10
4
RY**(0,1,2)*** 1/2 HP, 240 VDC, UL 508
RY**(0,1,2)*** 1/4 HP, 120 VDC, UL 508
RY**(0)*** 8 A, 415 VAC, resistive, UL 508 6 x10
3
RY**(0,1,2)*** Pilot duty - B300, UL 508 6000
RY*** *** CO, 8 A, 250 VAC, resistive, 70°C 5x10
3
RY**1 *** 6(4)A, 250 VAC, 85°C, EN60730 1x10
5
Coil data
Rated coil voltage range DC coil 5...60 VDC
Coil power DC coil typ. 220 mW
Operative range 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
005 5 3,5 0,5 112+10% 223
006 6 4,2 0,6 162+10% 222
009 9 6,3 0,9 320+10% 253
012 12 8,4 1,2 627+10% 230
024 24 16,8 2,4 2350+10% 245
048 48 33,6 4,8 9391+10% 245
060 60 42,0 6,0 14000+10% 257
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
F0142-F