Datasheet RT314F05 Specification

Download

Page 1

General Purpose Relays

PCB Relays

Power PCB Relay RT1 bistable

1 pole 16A, 1 form C (CO) or 1 form A (NO) contact

Polarized bistable version with 1 or 2 coils

5kV/10mm coil-contact

Reinforced insulation

Typical applications Battery powered equipment or applications with “memory function”

SCHRACK

F0176-C

Approvals

VDE Cert. No. 40007571, UL E214025, cCSAus 1142018

Technical data of approved types on request

Contact Data

Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A Limiting continuous current 16A, UL: 20A Limiting making current, max. 4s, duty factor 10% 30A Breaking capacity max. 4000VA Contact material AgNi 90/10 Frequency of operation, with/without load 360/72000h Operate/Reset time max. 10/10ms Bounce time max., form A/form B 3/6ms

Contact ratings

Type Contact Load Cycles

IEC 61810

RT314 A (NO) 16A, 250VAC resistive, 85°C 30x10 RT314 C (CO) 16A, 250VAC resistive, 85°C 10x10

UL 508

RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x10 RT334 A (NO) 16A, 250VAC, general purpose, 85°C 50x103 RT314 A (NO) 1hp, 240VAC, 40°C 1x10

Mechanical endurance >5x106 operations

-1

Coil Data, bistable coils 1 coil 2 coils

Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at <10% duty factor Coil insulation system according UL1446 class F

Coil versions, bistable coil

Coil Rated Set Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW

bistable 1 coil

A03 3 2.1 1.7 21 429 A05 5 3.5 2.8 62 403 A06 6 4.2 3.3 90 400 A12 12 8.4 6.6 360 400 A24 24 16.8 13.2 1440 400 bistable 2 coils F03 3 2.1 1.7 15 600

F05 5 3.5 2.8 42 595

F06 6 4.2 3.3 55 655 F12 12 8.4 6.6 240 600

F24 24 16.8 13.2 886 650

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Bistable coils - operation

Version 1 coil 2 coils Coil terminals A1 A2 A1 A3 A2 Operate + - + - Reset - + - + Contact position not deﬁned at delivery

Datasheets and product speciﬁcation according to IEC 61810-1 and to be used only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Deﬁnitions’ section, available at http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations are subject to change.

Page 2

General Purpose Relays PCB Relays

SCHRACK

Power PCB Relay RT1 bistable

Insulation Data

Initial dielectric strength between open contacts 1000V between contact and coil 5000V Clearance/creepage between contact and coil ≥ 10/10mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Category of environmental protection IEC 61810 RTII - ﬂux proof, RTIII - wash tight Vibration/shock resistance (functional), opening B contact 3/5g opening closed A contact 6/15g Shock resistance (destructive) 100g

Dimensions

rms

(Continued)

Other Data (continued)

Terminal type PCB-THT, plug-in Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII - ﬂux proof 270°C/10s RTIII - wash tight 260°C/5s Packaging/unit tube/20 pcs., box/500 pcs.

1) socket available for 1 coil version only, see Accessories.

Accessories

For 1 coil version, details see datasheet NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply.

PCB layout / terminal assignment

Bottom view on solder pins

Accessories Industrial Power Relay RT

S0272-BC

a) Indicated contact position during or after coil

energization with reset voltage.

b) for 2 coil version only

12A, pinning 3,5mm, 1 form A (NO) contact

16 A, pinning 5 mm, 1 form A (NO) contact

S0418-CM

*) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used.

16 A, pinning 5 mm, 1 form C (CO) contact

S0418-CM

*) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used.

S0163-DI

Datasheets and product speciﬁcation according to IEC 61810-1 and to be used only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Deﬁnitions’ section, available at http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ section, application notes and all speciﬁcations are subject to change.

Page 3

General Purpose Relays PCB Relays

SCHRACK

Power PCB Relay RT1 bistable

(Continued)

Product code structure Typical product code RT 3 1 4 F24

Type RT Power PCB Relay RT1 bistable Version 1 12A, pinning 3,5mm, ﬂux proof 3 16A, pinning 5mm, ﬂux proof D 16A, pinning 5mm, wash tight Contact conﬁguration 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table

Product code Version Contacts Contact material Coil version Coil Part number

RT314A03 16A; 1 form C (CO) AgNi 90/10 Bistable 1coil RT314A05 pinning 5mm, contact 5VDC 7-1393239-8 RT314A06 ﬂux proof 6VDC 7-1393239-9 RT314A12 12VDC 8-1393239-0 RT314F03 RT314F05 5VDC 8-1393239-5 RT314F06 6VDC 8-1393239-6 RT314F12 12VDC 8-1393239-7 RT314F24

RT134F12

Other types on request. This list represents the most common types and does not show all variants covered by this datasheet.

pinning 3,5mm,

12A,

ﬂux proof

1 form A (NO)

contact

AgNi 90/10

Bistable 2 coils

3VDC

3VDC 8-1393239-4

24VDC

12VDC 4-1415382-1

7-1393239-7

8-1393239-8

Datasheets and product speciﬁcation according to IEC 61810-1 and to be used only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Deﬁnitions’ section, available at http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations are subject to change.