Page 1
Features
• Current or Voltage Input Types
• SCR Output
• Zero Crossing Switching
• Standard 16−Lead DIP Type Package with 4 Pins
RS4 Series
Printed Circuit Board Mountable
Solid State Relay, 1 Amp.
D63
Input Specifications
RS4−1D1−A (Current Input Type)
Control Current Range: 10−35mA
Must Turn−On Current: 10mA
Must Turn−Off Current: 1mA
RS4−1D1−B (Voltage Input Type)
Control Voltage Range: 3.5−10VDC
Nom. Input Impedance: 270Ω
Typ. Input Current (@ 5VDC): 15mA
Must Turn−On Voltage: 3.5VDC
Must Turn−Off Voltage: 1.0VDC
Output Specifications
Operating Voltage Range: 20−280V (RMS)
Load Current Range: 0.01−1.0A (RMS)
Transient Over−Voltage: 600V (Peak)
Max. Surge Current (16.6ms): 30A (Peak)
Min. Off−State dv/dt: 500V/µs at max. rated voltage
Max. Off−State Leakage Current: 0.01mA (RMS) at rated voltage
Max. On−State Voltage Drop: 1.2V (Peak) at rated current
Max. Turn−On Time: 1/2 cycle
Max. Turn−Off Time: 1/2 cycle
Power Factor (Min.) with Max. Load: 0.5
Electrical Specifications
Dielectric Strength (Input−Output Isolation): 3750V (RMS)
Min. Insulation Resistance (@ 500VDC): 10
Max. Capacitance (Input−Output): 2.0pF
Environmental Characteristics
Operating: −30°C to +80°C
Storage: −30
°C to +125°C
9
Ω
16 10
18
.850 (21.6)
Max
.600 (15.24)
.700 (17.78)
.265 (6.7)
Max
.190
(4.8)
.125
(3.18)
Pin Connection Diagram
+
Input Output
−
AC
AC
.300 (7.6)
Max
NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com
103
Loading...