Datasheet RP10-1205DE, RP10-1205SE, RP10-1212DE, RP10-1212SE, RP10-1215DE Datasheet (RECOM)
...Page 1
PO 36 www.recom-international.comAugust 2002
RP10-4805SE: Derating & Efficiency Curves
POWERLINE - DC/DC-Converter
E-Series, 10W, 1.6 kV Isolation, 2:1 Wide Input Range (Single & Dual Output)
● 10 Watts Output Power
● 2:1 Wide Input Voltage Range
● International Safety Standard
Approvals
● Six-Sided Continuous Shield
● High Efficiency up to 86%
● Standard 50.8 x 25.4 x 10.2mm
Package
● Fixed Switching Frequency
● UL 1950 Component Recognised
Features
Part Number Input Output Output Input Current Efficiency Capacitive
Voltage Voltage Current (see note 6) (see note 7) Load
max.
VDC VDC mA mA % µF
RP10-123.3SE 9-18 3.3 2000 724 80 6800
RP10-1205SE 9-18 5 2000 1082 81 4700
RP10-1212SE 9-18 12 830 1064 82 690
RP10-1215SE 9-18 15 670 1088 81 470
RP10-1205DE 9-18 ±5 ±1000 1068 82 ±680
RP10-1212DE 9-18 ±12 ±416 1053 83 ±330
RP10-1215DE 9-18 ±15 ±333 1041 84 ±110
RP10-243.3SE 18-36 3.3 2000 362 80 6800
RP10-2405SE 18-36 5 2000 534 82 4700
RP10-2412SE 18-36 12 830 519 84 690
RP10-2415SE 18-36 15 670 523 84 470
RP10-2405DE 18-36 ±5 ±1000 548 80 ±680
RP10-2412DE 18-36 ±12 ±416 520 84 ±330
RP10-2415DE 18-36 ±15 ±333 520 84 ±110
RP10-483.3SE 36-75 3.3 2000 183 79 6800
RP10-4805SE 36-75 5 2000 260 84 4700
RP10-4812SE 36-75 12 830 253 86 690
RP10-4815SE 36-75 15 670 258 85 470
RP10-4805DE 36-75 ±5 ±1000 267 82 ±680
RP10-4812DE 36-75 ±12 ±416 254 86 ±330
RP10-4815DE 36-75 ±15 ±333 260 84 ±110
Selection Guide 12V, 24V and 48V Input Types
125
75
50
25
0
100
Ambient Temperature Range (°C)
-40-25 -10 0 50 60 70 80 90 100
Output Power (%)
Natural Convection
125
75
50
25
0
100
Ambient Temperature Range (°C)
-40-25 -10 0 50 60 70 80 90 100
Output Power (%)
Natural Convection
125
75
50
25
0
100
Ambient Temperature Range (°C)
-40-25 -10 0 50 60 70 80 90 100
Output Power (%)
Natural Convection
83
75
70
50
Output Load (A)
0.5
Efficiency (%)
76
77
78
79
80
81
82
65
11.251.5 1.75 2
RP10-4805SE Derating Curve RP10-4805SE-M1 Derating Curve RP10-4805SE-M2
RP10-4805S Efficiency vs Output Load
Page 2
PO 37www.recom-international.com August 2002
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Power 10W max.
Voltage Accuracy (full Load and nominal Vin) ±2%
Minimum Load 10% of FL
Line Regulation (LL-HL at full load) ±1%
Load Regulation (10% to 100% FL) Single ±1%
Dual ±2%
Cross Regulation (asymmetrical load 25%/100% FL) Dual ±5%
Ripple and Noise (20MHz bandwith) Single 50mVp-p
Dual 75mVp-p
Temperature Coefficient ±0.02%/°C, max.
Transient Response (25% load step change) 500µsec
Over Voltage Protection (with zener diode clamp) 3.3V output 3.9V
5V output 6.2V
12V output 15V
15V output 18V
Over Load Protection (% of full load at nominal Vin) 150% max.
Short Circuit Protection Hiccup, automatic recovery
Input Voltage Range RP10 12V nominal input 9-18VDC
RP10 24V nominal input 18-36VDC
RP10 48V nominal input 36-75VDC
Input Filter Pi Type
Input Surge Voltage (100 ms max.) 12V input 36VDC
24V input 50VDC
48V input 100VDC
Input Reflected Ripple (nominal Vin and full load, see note 1) 30mAp-p
Start Up Time (nominal Vin and constant resistor load) 20ms typ.
Remote ON/OFF (see note 2) Positive logic DC-DC ON Open or 3.5V < Vr < 12V
DC-DC OFF Short or 0V < Vr < 1.2V
Negative logic DC-DC ON Short or 0V < Vr < 1.2V
DC-DC OFF Open or 3.5V < Vr < 12V
Remote Off Input Current Nominal input 2.5mA
Efficiency see „Selection Guide“ table
Isolation Voltage 1600VDC min.
Isolation Resistance 109Ω min.
Isolation Capacitance 300pF max.
Switching Frequency 300kHz typ.
Approved to Safety Standards UL 1950, EN60950
Case Material Nickel-coated copper
Base Material Non-conducted black plastic
Potting Material Epoxy (UL94-V0)
Weight 27g
Dimensions 50.8 x 25.4 x 10.2 mm
MTBF (see note 3) 1.976 x 10
6
Hours
continued on next page
POWERLINE - DC/DC-Converter
E-Series, 10W, 1.6 kV Isolation, 2:1 Wide Input Range (Single & Dual Output)
Page 3
PO 38 www.recom-international.comAugust 2002
Pin Pitch Tolerance ±0.35 mm
Package Style and Pinning (mm)
2.50
5.10
25.40
3
12
54
20.30
50.80
dia.
1.0
10.20
5.6
10.20
10.20
12.70
15.20
Bottom
View
6
Specifications continued (typical at nominal input and 25°C unless otherwise noted)
Operating Temperature Range (see derating curves on previous page) Standard –25°C to +85°C (with derating)
M1 (see note 4) –40°C to +85°C (non-derating)
M2 –40°C to +85°C (with derating)
Maximum Case Temperature +100°C
Storage Temperature Range –55°C to +105°C
Thermal Impedance (see note 5) Natural convection 12°C/Watt
Thermal Shock MIL-STD-810D
Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity 5% to 95% RH
Conducted Emissions EN55022 Level A
Radiated Emissions EN55022 Level A
Conducted Immunity EN61000-4-6 Perf. Criteria 2
Radiated Immunity EN61000-4-3 Perf. Criteria 2
Surge EN61000-4-5 Perf. Criteria 2
Fast Transient EN61000-4-4 Perf. Criteria 2
ESD EN61000-4-2 Perf. Criteria 2
Notes
1. Simulated source impedance of 12uH. 12uH inductor in series with +Vin.
2. The ON/OFF control is an optional function . There are positive logic and negative logic.The pin voltage is referenced to negative input.
To order positive logic ON-OFF control add the suffix ' P ' (Ex: RP10-2405P)
To order negative logic ON-OFF control add the suffix ' N ' (Ex: RP10-2405N)
3. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40 °C. (Ground fixed and controlled environment).
4. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version.
5. Heat sink is optional and P/N: 7G -0020A, Thermal impedance is 10°C/Watt for natural convection.
6. Maximum value at nominal input Voltage and full load of standard type.
7. Typical value at nominal input voltage and full load.
Pin Connections
Pin # Single Dual
1+Vin +Vin
2–Vin –Vin
3+Vout +Vout
4NoPin Common
5–Vout –Vout
6 CTRL (Optional) CTRL (Optional)
POWERLINE - DC/DC-Converter
E-Series, 10W, 1.6 kV Isolation, 2:1 Wide Input Range (Single & Dual Output)
Loading...