Page 1
RN2107F∼RN2109F
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)
RN2107F,RN2108F,RN2109F
Switching, Inverter Circuit, Interface Circuit
and Driver Circuit Applications
z With built-in bias resistors
z Simplify circuit design
z Reduce a quantity of parts and manufacturing process
z Complementary to RN1107F~RN1109F
Equivalent Circuit and Bias Resister Values
Type No. R1 (kΩ) R2 (kΩ)
RN2107F 10 47
RN2108F 22 47
RN2109F 47 22
Absolute Maximum Ratings
(Ta = 25°C)
Unit: mm
JEDEC ⎯
EIAJ ⎯
TOSHIBA 2-2HA1A
Weight: 2.3 mg (typ.)
Characteristic Symbol Rating Unit
Collector-base voltage V
Collector-emitter voltage
Emitter-base voltage
Collector current IC −100 mA
Collector power dissipation PC 100 mW
Junction temperature Tj 150 °C
Storage temperature range
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
RN2107F
~RN2109F
RN2107F −6
RN2108F −7
RN2109F
RN2107F
~RN2109F
−50 V
CBO
V
−50 V
CEO
V
EBO
−15
T
−55~150 °C
stg
V
2007-11-01 1
Page 2
RN2107F∼RN2109F
Electrical Characteristics
Characteristic Symbol
Collector cut-off
current
Emitter cut-off current
DC current gain
Collector-emitter
saturation voltage
Input voltage (ON)
Input voltage (OFF)
Transition frequency
Collector Output
capacitance
Input resistor
Resistor ratio
RN2107F
~RN2109F
RN2107F V
RN2108F V
RN2109F
RN2107F 80 ― ―
RN2108F 80 ― ―
RN2109F
RN2107F
~RN2109F
RN2107F
RN2108F
RN2109F
RN2107F
RN2108F
RN2109F
RN2107F
~RN2109F
RN2107F
~RN2109F
RN2107F
RN2108F
RN2109F
RN2107F
RN2108F
RN2109F
(Ta = 25°C)
V
V
V
Test
Circuit
I
CBO
I
CEO
I
EBO
h
FE
CE (sat)
I (ON)
I (OFF)
f
―
T
C
―
ob
R1 ― ―
R1/R2 ― ―
―
―
―
―
―
―
Test Condition Min Typ. Max Unit
V
= −50V, IE = 0 ― ― −100 nA
CB
V
= −50V, IB = 0 ― ― −500 nA
CE
= −6V, IC = 0 −0.081 ― −0.15
EB
= −7V, IC = 0 −0.078 ― −0.145
EB
V
= −15V, IC = 0 −0.167 ― −0.311
EB
V
= −5V,
CE
= −10mA
I
C
70 ― ―
I
= −5mA,
C
= −0.25mA
I
B
V
= −0.2V,
CE
I
= −5mA
C
V
= −5V,
CE
= −0.1mA
I
C
V
= −10V,
CE
IC = −5mA
V
= −10V, IE = 0,
CB
f = 1MH
z
― −0.1 −0.3
−0.7 ― −1.8
−1.0 ― −2.6
−2.2 ― −5.8
−0.5 ― −1.0
−0.6 ― −1.16
−1.5 ― −2.6
― 200 ―
― 3 6
7 10 13
15.4 22 28.6
32.9 47 61.1
0.191 0.213 0.232
0.421 0.468 0.515
1.92 2.14 2.35
mA
―
V
V
V
MHz
pF
kΩ
―
2007-11-01 2
Page 3
RN2107F∼RN2109F
2007-11-01 3
Page 4
RN2107F∼RN2109F
2007-11-01 4
Page 5
Type Name Marking
RN2107F
RN2108F
RN2109F
RN2107F∼RN2109F
2007-11-01 5
Page 6
RN2107F∼RN2109F
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
20070701-EN GENERAL
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
2007-11-01 6
Loading...