Datasheet PWR1203, PWR1204, PWR1205, PWR1206, PWR1207 Datasheet (cdtechno)

Product Data Sheet

PWR12XX

FEATURES

 LOW COST

 INDUSTRY-STANDARD PACKAGE

 SINGLE AND DUAL OUTPUTS

 24-PIN DIP PACKAGE

 BUILT-IN STANDOFFS

 INTERNAL INPUT AND OUTPUT FILTERING

3 WATTS UNREGULATED

DC/DC CONVERTERS

DESCRIPTION

The PWR12XX Series offers a broad line of low-cost, high­performance, unregulated, single and dual output DC/DC
converters in a 24-pin DIP package. These miniature
converters offer better performance and lower cost in
industry-standard packages and pinouts. The PWR12XX
Series is internally filtered. No external parts are necessary.

Surface mounted components and a low thermal resistance
encapsulant allow for superior reliability, excellent thermal
dissipation, and an extended temperature range of –25°C
to +85°C at no extra cost.

The PWR12XX Series is ideal for use on high-density PC
boards where isolated, unregulated, power is needed.
Standoffs allow for PC board cleaning, helping preserve
isolation. They also allow for visual inspection of solder
joints.

MECHANICAL

TOP VIEW

.805+0.010

(20.45)

MATERIAL: Units are encapsulated in a low thermal resistance
molding compound which has excellent chemical resistance, wide
operating temperature range, and good electrical properties under
high humidity environments. The encapsulant and outer shell of the
unit have UL94V-0 ratings. Lead material is brass with a solder plated
surface to allow ease of solderability.

PWR12XX 11/98 REV C Page 1

PWR12XX

1.270+0.010
(32.25)

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Phone: [phone] Fax: [phone]

.010+.005

(0.25)

BOTTOM VIEW

Internet: http://www.cdpowerelectronics.com

SIDE VIEW

0.100+0.015
(2.54)

1 2 3 10 11 12

24 23 22 15 14 13

.020+0.002

(0.51)

0.400+0.010
(10.16)

0.170
MIN

(4.32)

0.60

15.23

(.1025)

2.601

Power Electronics Division, Europe

C&D Technologies (Power Electronics) Ltd.

132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland

Tel: [phone] Fax:[phone]

NC = Do Not Connect

Duplicate pin functions are internally connected.

All dimensions are in inches (millimeters).

GRID: 0.100 inches (2.54 millimeters)

PIN PLACEMENT TOLERANCE: ± 0.015"

PIN # SINGLES DUALS

1 +VIN +VIN
2NC–VOUT
3 NC Common

10 –VOUT Common
11 +VOUT +VOUT
12 –VIN –VIN

13 –VIN –VIN
14 +VOUT +VOUT
15 –VOUT Common

22 NC Common
23 NC –VOUT
24 +VIN +VIN

ELECTRICAL SPECIFICATIONS

Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted.

NOMINAL RATED RATED REFLECTED

INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT NO LOAD RATED LOAD RIPPLE CURRENT

MODEL (V

DC)(VDC) (mA) (mA) (mA) (mAp-p)

PWR1200 5 5 600 30 800 45
PWR1201 5 12 250 30 800 45
PWR1202 5 15 200 30 800 45
PWR1203 5 ±5 ±300 30 800 45
PWR1204 5 ±12 ±125 30 800 45
PWR1205 5 ±15 ±100 30 800 45

PWR1206 12 5 600 30 330 25
PWR1207 12 12 250 30 330 25
PWR1208 12 15 200 30 330 25
PWR1209 12 ±5 ±300 30 330 25
PWR1210 12 ±12 ±125 30 330 25
PWR1211 12 ±15 ±100 30 330 25

PWR1212 15 5 600 30 265 20
PWR1213 15 12 250 30 265 20
PWR1214 15 15 200 30 265 20
PWR1215 15 ±5 ±300 30 265 20
PWR1216 15 ±12 ±125 30 265 20
PWR1217 15 ±15 ±100 30 265 20

PWR1218 24 5 600 30 165 20
PWR1219 24 12 250 30 165 20
PWR1220 24 15 200 30 165 20
PWR1221 24 ±5 ±300 30 165 20
PWR1222 24 ±12 ±125 30 165 20
PWR1223 24 ±15 ±100 30 165 20

PWR1240 5 9 333 30 800 45
PWR1241 12 9 333 30 330 25
PWR1242 15 9 333 30 265 20
PWR1243 24 9 333 30 165 20

INPUT CURRENT

COMMON SPECIFICATIONS

Specifications typical at TA = +25°C, rated input voltage, rated output current unless otherwise noted.

PARAMETER CONDITIONS MIN TYP MAX UNITS

INPUT

Voltage Range 4.5 5 5.5 V

ISOLATION

Rated Voltage 500 V
Test Voltage 60 Hz, 10 Seconds 500 Vpk
Resistance 10 GW
Capacitance 90 pF
Leakage Current V

OUTPUT

Rated Power 3 W
Voltage Setpoint Accuracy Rated Load, Nominal V
Temperature Coefficient ±0.02 %/%°C
Ripple and Noise

ISO = 240VAC, 60HZ 10 µArms

IN ±3 ±5 %

(BW = DC to 20MHz) No External Components 150 mVp-p

10µF Across Each Output 10 mVrms

Voltage No Load,V

10µF Across Each Output 30 mVp-p

No Load,VOUT = ±12V ±15 VDC

No Load,VOUT = ±15V ±18 VDC

OUT = +5V 7 VDC

Line Regulation 1.2 %/%V
Load No Load To Rated Load 6 %

GENERAL

Package Weight 12 g
Switching Frequency 150 kHz
MTTF per
Efficiency 75 %

MIL-HDBK-217, Rev E* Circuit Stress Method 700 kHr

TEMPERATURE

Specification –25 +25 +85 °C
Operation –40 +125 °C
Storage –40 +125 °C

10.8 12 13.2 VDC

13.5 15 16.5 VDC

21.6 24 26.4 VDC

DC

DC

IN

* For demonstrated MTTF results reference Power Convertible's Reliability Report PWR1205

PWR12XX 11/98 REV CPage 2

ABSOLUTE MAXIMUM RATINGS

Output Short-Circuit Duration ................................................... Momentary

Internal Power Dissipation .................................................................. 1.3W

Lead Temperature (soldering, 10 seconds max) ............................ +300°C

ORDERING INFORMATION

APPLICATION NOTES

UNBALANCED LOADS

Unbalanced loads may be used on dual output models
with either side providing up to its rated current. Output
voltages, by design, will track each other in an unbal­anced state within ±10% of one another.

PWR 12XX

Device Family

PWR indicates DC/DC converter

Model Number
Selected from Table of Electrical Characteristics

TYPICAL PERFORMANCE CURVES

TA = +25°C, Rated Input Voltage, Rated Output Current unless otherwise noted.

OUTPUT NOISE

Output noise can be reduced to 30mVp-p, typically, by
adding a 10µF tantalum capacitor with an equivalent
series resistance (ESR) of less than 150mW at 10kHz
across each output.

PWR12XX 11/98 REV C Page 3

TYPICAL PERFORMANCE CURVES

TA = +25°C, Rated Input Voltage, Rated Output Current unless otherwise noted.

Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D
Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein
may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or
in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in
user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications.

PWR12XX 11/98 REV CPage 4