Page 1
DISCRETE SEMICONDUCTORS
DATA SH EET
ook, halfpage
M3D088
PLVA2600A series
Low-voltage avalanche regulator
double diodes
Product specification
Supersedes data of 1999 May 10
2001 Oct 15
Page 2
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
FEATURES
• Very low dynamic impedance at
low currents: approximately1⁄20 of
conventional series
• Hard breakdown knee
• Low noise: approximately1⁄10 of
conventional series
• Total power dissipation:
max. 250 mW
• Small tolerances of V
Z
• Working voltage range:
nom. 5.0 to 6.8 V
• Non-repetitive peak reverse power
dissipation: max. 30 W.
APPLICATIONS
• Low current, low power, low noise
applications
• CMOS RAM back-up circuits
• Voltage stabilizers
• Voltage limiters
• Smoke detector relays.
MARKING
TYPE NUMBER MARKING CODE
PLVA2650A ∗9J
PLVA2653A ∗9K
PLVA2656A ∗9L
PLVA2659A ∗9M
PLVA2662A ∗9N
PLVA2665A ∗9O
PLVA2668A ∗9P
Note
1. ∗ = p : Made in Hong Kong.
∗ = t : Made in Malaysia.
∗ = W: Made in China.
PINNING
PIN DESCRIPTION
1 cathode (k1)
2 cathode (k2)
3 common anode
(1)
DESCRIPTION
The PLVA2600A series consists of
two high performance voltage
regulator diodes with common
anodes, in small SOT23 plastic SMD
packages.
The seriesconsists of PLVA2650A to
PLVA2668A.
21
21
3
Top view
Fig.1 Simplified outline (SOT23) and symbol.
3
MAM245
2001 Oct 15 2
Page 3
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
I
F
I
ZRM
P
ZSM
P
tot
T
stg
T
j
Note
1. Device mounted on an FR4 printed circuit-board.
continuous forward current − 250 mA
repetitive peak working current tp= 100 µs; δ = 10% − 250 mA
non-repetitive peak reverse power
tp= 100 µs; Tj= 150 °C − 30 W
dissipation
total power dissipation single diode loaded;
T
=25°C; note 1
amb
double diode loaded;
=25°C; note 1
T
amb
− 250 mW
− 180 mW
storage temperature −65 +150 °C
junction temperature − 150 °C
2001 Oct 15 3
Page 4
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
ELECTRICAL CHARACTERISTICS
Tj=25°C unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
F
V
Z
R
Z
S
Z
I
R
forward voltage IF=10mA −−0.9 V
working voltage IZ= 250 µA
PLVA2650A 4.80 5.00 5.20 V
PLVA2653A 5.10 5.30 5.50 V
PLVA2656A 5.40 5.60 5.80 V
PLVA2659A 5.70 5.90 6.10 V
PLVA2662A 6.00 6.20 6.40 V
PLVA2665A 6.30 6.50 6.70 V
PLVA2668A 6.60 6.80 7.00 V
working voltage I
=10µA
Z
PLVA2650A − 4.30 − V
PLVA2653A − 5.20 − V
PLVA2656A − 5.51 − V
PLVA2659A − 5.85 − V
PLVA2662A − 6.19 − V
PLVA2665A − 6.49 − V
PLVA2668A − 6.80 − V
dynamic resistance 1 kHz superimposed;
I
is 10% of I
PLVA2650A −−700 Ω
ZAC
; IZ= 250 µA
ZDC
PLVA2653A −−250 Ω
PLVA2656A to PLVA2668A −−100 Ω
temperature coefficient IZ= 250 µA
PLVA2650A − 0.20 − mV/K
PLVA2653A − 1.60 − mV/K
PLVA2656A − 1.90 − mV/K
PLVA2659A − 2.40 − mV/K
PLVA2662A − 2.65 − mV/K
PLVA2665A − 2.90 − mV/K
PLVA2668A − 3.40 − mV/K
reverse current VR= 80%; VZnominal
PLVA2650A −−20000 nA
PLVA2653A −−5000 nA
PLVA2656A −−1000 nA
PLVA2659A −−500 nA
PLVA2662A −−100 nA
PLVA2665A −−50 nA
PLVA2668A −−10 nA
2001 Oct 15 4
Page 5
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
I
R
∆V
Z
V
n
reverse current VR= 50%; VZnominal
PLVA2650A − 34 − nA
PLVA2653A − 22 − nA
PLVA2656A − 1.1 − nA
PLVA2659A − 0.9 − nA
PLVA2662A − 0.9 − nA
PLVA2665A − 0.9 − nA
PLVA2668A − 0.8 − nA
reverse current V
= 90%; VZnominal
R
PLVA2650A − 21 −µA
PLVA2653A − 3.5 −µA
PLVA2656A − 1.3 −µA
PLVA2659A − 1.0 −µA
PLVA2662A − 0.05 −µA
PLVA2665A − 0.04 −µA
PLVA2668A − 0.006 −µA
line regulation
PLVA2659A to PLVA2668A I
PLVA2656A I
PLVA2650A I
PLVA2653A I
noise voltage density f = 1 kHz; B = 1 kHz; IZ= 250 µA −−1.0
=10µA; IHi=1mA −−0.1 V
LO
=50µA; IHi=1mA −−0.1 V
LO
= 100 µA; IHi=1mA −−0.4 V
LO
= 100 µA; IHi=1mA −−0.2 V
LO
µV
----------- Hz
THERMAL CHARACTERISTICS
SYMBOL PARAMETER CONDITIONS VALUE UNIT
R
R
th j-tp
th j-a
thermal resistance from junction to tie-point 360 K/W
thermal resistance from junction to ambient note 1 500 K/W
Note
1. Device mounted on an FR4 printed circuit-board.
2001 Oct 15 5
Page 6
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
PACKAGE OUTLINE
Plastic surface mounted package; 3 leads SOT23
D
3
A
A
1
12
e
1
b
p
e
w M
B
E
H
E
detail X
AB
Q
L
p
X
v M
A
c
0 1 2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
0.1
b
cD
p
0.48
0.15
3.0
0.38
0.09
IEC JEDEC EIAJ
2.8
1.4
1.2
e
E
1.9
REFERENCES
0.95
e
1
UNIT
A
max.
1.1
mm
0.9
OUTLINE
VERSION
SOT23 TO-236AB
2001 Oct 15 6
H
2.5
2.1
L
Qwv
p
E
0.55
0.45
0.15
0.45
0.2
0.1
EUROPEAN
PROJECTION
ISSUE DATE
97-02-28
99-09-13
Page 7
Philips Semiconductors Product specification
Low-voltage avalanche regulator double diodes PLVA2600A series
DATA SHEET STATUS
PRODUCT
DATA SHEET STATUS
Objective data Development This data sheet contains data from the objective specification for product
Preliminary data Qualification This data sheet contains data from the preliminary specification.
Product data Production This data sheet contains data from the product specification. Philips
(1)
STATUS
(2)
DEFINITIONS
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseor at any otherconditionsabovethose given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythat such applications will be
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusingorselling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
theuseof any of these products, conveys nolicenceortitle
under any patent, copyright, or mask work right to these
products,and makes no representations orwarrantiesthat
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
2001 Oct 15 7
Page 8
Philips Semiconductors – a w orldwide compan y
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2001
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands 613514/04/pp8 Date of release: 2001 Oct 15 Document order number: 9397 750 08768
SCA73
Loading...