Datasheet PDA2446-D-SF, PDA2446-D-US, PDA2446-B-AP, PDA2446-B-AS, PDA2446-B-SF Datasheet (HP)

Analog Pigtailed PIN
Photodiodes

Technical Data

PDA2446

Features

• Variety of Flange/Pinout
Options

• Compact Package

• High Reliability Planar
InGaAs PIN Photodiode

• High Responsivity

• High Linearity

• Low Back Reflection

• High Bandwidth >1.5 GHz

• –40°C to +85°C Operating
Temperature Range

Applications

• CATV/CCTV

• Fiber in the Loop (FITL)

Description

The PDA range of products
includes a variety of compact
fiber pigtailed devices designed
for wide operating temperature,
low cost applications such as
fiber in the loop. The planar
InGaAs photodiodes are manufac­tured using MOVPE growth
technology and give low leakage
and high responsivity perform­ance with excellent reliability.

The construction of the devices
includes a hermetically sealed
photodiode and an actively
aligned fiber pigtail and is
designed to be compatible with
the environmental requirements
of the Bellcore TA-NWT-000983
document.

The product range includes a
variety of pinout, fiber type, and
package mounting bracket

options, designed to match the
majority of offerings in the
marketplace. If the specific
arrangement or performance you
require is not listed, please
contact Hewlett-Packard. High
flexible design and manufacturing
processes allow both physical and
electro-optic customization to
suit your needs.

532

5965-7314E (4/97)

PDA Pigtailed Photodiode Specifications
Absolute Maximum Ratings

Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that
each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that
limiting values of more than one parameter can be applied to the product at the same time.

Parameter Symbol Minimum Maximum Units

Reverse Voltage Vr - 20 V
Reverse Current Ir - 1 mA
Forward Voltage Vf - 1 V
Forward Current If - 5 mA
Power Dissipation - - 50 mW
Operating Temperature Tc –40 +85 °C
Storage Temperature Ts –40 +85 °C
Soldering – 10 seconds - - +260 °C
Fiber Pull - - 10 N

Performance Specifications

Test Conditions:

Unless Otherwise Stated PDA2446

Parameter Symbol Vr = 5 V, Tc = +25°C Min. Max. Units

Dark Current Id - 1 nA

Tc= +85°C-50nA

Reverse Breakdown Voltage Vbr Ir = 10 µA35-V
Capacitance C 1 MHz - 1.7 pF
Responsivity R λ = 1300 nm 0.7 - A/W
Operating Wavelength λ 80% points 1200 1650 nM
Small Signal Bandwidth Bw 1.5 - GHz

Linearity X

Second Order - Vr = 15 V -70 dBc

Third Order - As above -85 dBc

1

fl = 135 MHz

f2 = 190 MHz

70% Modulation

0 dBm Optical Power

Fiber Pigtail: Tight jacketed, self-mode stripping, singlemode fiber

Parameter Minimum Maximum Units

Length 1.0 - m
Core Diameter 8 10 µm
Cladding Diameter 122 128 µm
Concentricity Error - 8 %
Secondary Jacket Diameter 0.8 1.0 mm

533

PDA Mechanical Outline Options

PDA2446-B

A

DC F

∅B

∅G

PDA2446-D

K

H

F

J

∅N

∅E

MAX.

DIM.

A

∅B

C
D

∅E

F
G

25.0

6.5
–

8.5

MIN.

12.0

0.41

1000

DIM.

0.41

∅E

1000

F

2.54 NOM.

∅G

MAX.

25.0

–

6.5

–

–

8.5

–

0.47

18.0
–

MAX.

0.47
–

MIN.

DIM.

12.7 NOM.

H

–

J

0.9

K

–

L

3.8

M

2.54 NOM.

∅N

2.1

∅P

MAX.

7.5

1.1

7.5

4.2

2.4

MIN.

DIM.

–

A

–

∅B

12.0

C

–

D

ALL DIMENSIONS IN MILLIMETERS

A

D

C G

∅E

L

∅P

M

∅B

ALL DIMENSIONS IN MILLIMETERS

MIN.

PDA2446 Electrical Pin-Outs

2

13

PIN 1: CATHODE +VE
PIN 2: CASE
PIN 3: ANODE –VE

13

534

Ordering Information

PDA2446 - XI - XX

Connector Type:
AP = Angle Polished FC/PC
AS = Angle Polished SC/PC
US = Ultra Polished SC/PC
SF = Super Polished FC/PC

Flange Type:
B = Barrel
D = 2 hole PCB mount, 12.7 mm between centers

Additional options are available to meet your specific needs. Please contact your local representative for
details.

535

Discrete Pin-Preamplifiers

Preliminary Technical Data

PPA0052, PPA1052
PPA0155, PPA1155

Features

• Integrated InGaAs PIN and
GaAs Preamplifier

• FC or SC Receptacle or
Fiber Pigtailed

• Compact Package

• High Reliability Planar
InGaAs PIN Photodiode

• High Responsivity

Applications

• SONET/SDH

• Instrumentation

• O-E Converters

• Single and Multimode Fiber
Communications Systems

• Data Communication
Receivers

• FDDI

Description

The PPA*052 and PPA*155 are
compact connectorized or
pigtailed InGaAs photodiodes
with preamplifier designed for
wide operating temperature
range, low cost applications such
as SONET/SDH and Fiber in the
Loop. The planar InGaAs
photodiodes are manufactured
using MOVPE growth technology
which gives low leakage and high
responsivity performance with
excellent reliability. The wide
dynamic range GaAs IC pre­amplifier ensures compliance
with SONET/SDH standards.

The construction of the devices
includes a hermetically sealed
photodiode and amplifier actively
aligned within a receptacle
housing or to a fiber pigtail and is
designed to be compliant with
Bellcore TA-TSY-000983.

Preliminary Product Disclaimer

This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development
and targeted for release during 1997. Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices,
specifications, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time.

536

(5/97)

Performance Specifications
Absolute Limiting Ratings

Absolute (limiting) ratings mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that
each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that
limiting values of more than one parameter can be applied to the product at the same time.

Parameter Symbol Minimum Maximum Units

Supply Voltage V

DD

Photodiode Voltage (Negative) V pin - –7 V
Power Dissipation - - 350 mW
Operating Temperature Tc –40 +85 °C
Storage Temperature Ts –40 +85 °C
Soldering – 10 seconds - - +260 °C
Fiber Pull - - 10 N

- 5.5 V

Performance Specifications

[1]

Parameter Minimum Maximum Units

Responsivity 0.75 - A/W
Sensitivity

[2]

52 Mb/s –39 - dBm

155 Mb/s –36

Overload

[2,3]

–7 - dBm

Bandwidth 52 Mb/s 35 - MHz

155 Mb/s 90
Output Impedance 30 60 ohms
VDD Supply Voltage 4.75 5.25 V
VDD Supply Current - 50 mA
Photodiode Supply –7 –4.5 V

Notes:

1. Measured over the operating temperature range and power supply tolerance.

2. Measured at the data rate specified for 1 x 10

3. Higher overload performance available. Contact your local Hewlett-Packard Components representative for details.

-10

using an infinite extinction ratio laser source modulated with a 2

23-1

Fiber Pigtail: Tight jacketed, self-mode stripping, multimode

Parameter Minimum Maximum Units

Length 0.4 1.2 m
Core Diameter 47 53 µm
Cladding Diameter 122 128 µm
Concentricity Error - 8 %
Secondary Jacket Diameter 0.8 1.0 mm

PRBS pattern.

Schematic Diagram

1. GND

2. V

OUT

3. V pin

4. +V

DD

V pin -5 V

3

4

+5 V

V

DD

2

O/P

GND

1

537

Drawing Dimensions

PPA0052-FC-A
PPA0155-FC-A

1

42

3

∅Q

SLOT

PPA0052-SC-A
PPA0155-SC-A

1

4

∅L

3

2

∅K

1. GND

2. V

3. V pin

4. +V

∅D

∅F

∅H

∅J

SLOT

OUT

DD

E

C

C

∅R

∅J

B

B

H

A

MIN.

DIM. MIN.

A
B
C

∅D

A

E

∅F

M8 x 0.75

∅G

H

ALL DIMENSIONS IN MILLIMETERS

DIM. MIN.

A
B
C

M

D
E
F

ALL DIMENSIONS IN MILLIMETERS

–
–
–
–

12.0

0.27

13.35

MIN.

12.0

MAX.

19.5

9.5

15.0

9.1
–

0.33

13.55

MAX.

9.5

–

23.0

–

13.5

–

15.5

–

8.0

–

–

DIM.

2.08

∅J

–

L

–

M

–

N

–

P

2.54 NOM.

∅Q

–

∅R

DIM.

2.0

G

0.27

∅H

–

∅J

2.08

∅K

2.54 NOM.

∅L

17.8

M

MAX.

2.32

1.65

2.2

6.8

8.2

4.2

MAX.

3.0

0.33

7.5

2.5

18.2

N

F

E

P

∅G

L

M

D

G

PPA1052-A
PPA1155-A

L

B

42

538

H

1

3

∅G

∅M

∅E

A

C

D

∅N

K

F

MIN.

DIM. MIN.

–

A

–

B

12.0

C

–

D

0.27

∅E

400

F

ALL DIMENSIONS IN MILLIMETERS

MAX.

25.0

19.5
–

9.5

0.33

1200

DIM.

2.54 NOM.

∅G

–

H

–

K

13.35

L

2.1

∅M

–

∅N

MAX.

9.5

2.0

13.55

2.4

6.25

PPA1052-D
PPA1155-D

J

K

1

L

B

42

3

∅G

C F

∅E

P

∅M

D

H

∅N

A

MIN.

DIM. MIN.

–

A

–

B

12.0

C

–

D

0.27

∅E

400

F

2.54 NOM.

∅G

ALL DIMENSIONS IN MILLIMETERS

MAX.

25.0

18.0
–

9.5

0.33

1200

DIM.

3.8

H
J

0.9

K

12.7 NOM.

L

2.1

∅M

∅N

P

MAX.

4.2

–

7.5

1.1

2.4

–

6.25

–

7.5

Ordering Information

Allowable Part Numbers: PPA0052 - XX - A
PPA0052 - FC - A PPA0155 - XX - A
PPA0052 - SC - A Receptacle Type:
PPA1052 - A - FP FC = FC
PPA1052 - A - ST SC = SC
PPA1052 - A - DN
PPA1052 - A - SC PPA1052 - X - XX
PPA1052 - D - FP PPA1155 - X - XX
PPA1052 - D - ST Connector Type:
PPA1052 - D - DN FP = FC/PC
PPA1052 - D - SC ST* = ST

DN = DIN
PPA0155 - FC - A SC = SC
PPA0155 - SC - A
PPA1155 - A - FP Flange Type:
PPA1155 - A - ST A = 2 hole Panel mount, 13.4 mm between centers
PPA1155 - A - DN D = 2 hole PCB mount, 12.7 mm between centers
PPA1155 - A - SC
PPA1155 - D - FP
PPA1155 - D - ST
PPA1155 - D - DN
PPA1155 - D - SC

*ST is a registered trademark of AT&T.

539