Datasheet PD30CND10NAM5SA, PD30CND10PAM5SA Specification

Photoelectrics
Diffuse-reflective

Type PD30CND10....SA

• Miniature sensor range

• Range: 1 m

• Sensitivity adjustment by Potentiometer

• Modulated, red light 625 nm

• Supply voltage: 10 to 30 VDC

• Output: 100 mA, NPN or PNP preset

• Make and break switching function

• LED indication for output, stability and power ON

• Protection: reverse polarity, short circuit and transients

• Cable and plug versions

• Excellent EMC performance

Product Description

The PD30CND10 sensor
family comes in a compact
10 x 30 x 20 mm reinforced
PMMA/ABS housing.
The sensors are useful in
applications where high-ac­curacy detection as well as
small size is required.
Compact housing and high
power LED for excellent
performance-size ratio.

The Potentiometer function
for adjustment of the sen­sitivity makes the sensors
highly flexible. The output
type is preset (NPN or PNP),
and the output switching
function is NO and NC out­put.

Ordering Key

Type
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection type
Sensitivity adjustment

PD30CND10NAM5SA

Type Selection

Housing Range Connection Ordering no. Ordering no.
W x H x D Sn NPN PNP
Make and break switching Make and break switching

10 x 30 x 20 mm 1000 mm Cable PD 30 CND 10 NASA PD 30 CND 10 PASA
10 x 30 x 20 mm 1000 mm Plug PD 30 CND 10 NAM5SA PD 30 CND 10 PAM5SA

Specifications EN 60947-5-2

Rated operating distance (Sn) Up to 1 m,
reference target Kodak test
card R27, white, 90%
reflective, 200 x 200 mm

Blind zone ≤ 20 mm @ maximum
distance

Sensitivity
Electrical adjustment 210˚

Mechanical adjustment 240˚
Temperature drift ≤ 0.2%/ºC
Hysteresis (H) 5% to 20%
Rated operational volt. (UB ) 10 to 30 VDC

(ripple included)

Ripple (U
Output current

Continuous (Ie) ≤ 100 mA
Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)

No load supply current (Io) ≤ 25 mA @ UB max
Minimum operational current (Im)

) ≤ 10%

rpp

≤ 0.5 mA

OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud ) ≤ 2 VDC @ Ie max
Protection

and transients

Light source InGaAlP, LED, 625 nm
Light type Red, modulated
Emitter angle ± 2º @ half sensing

distance
Light spot

1.5 times the sensing distance 110 mm

Ambient light ≤ 10,000 lux
Operating frequency (f) ≤ 1000 Hz
Response time

OFF-ON (tON) ≤ 0.5 ms
ON-OFF (t

Power ON delay (tv) ≤ 30 ms
Output function

Open collector NPN or PNP by sensor type
Output switching function N.O. and N.C.

) ≤ 0.5 ms

OFF

Short-circuit, reverse polarity

Specifications are subject to change without notice (14.06.2016) 1

PD30CND10....SA

Specifications (cont.)

Indication

Output ON LED, yellow
Signal stability ON and

Power ON

LED, green. See curve for

condition of stability
Environment

Installation category III (IEC 60664/60664A;
60947-1)
Pollution degree 3 (IEC 60664/60664A;
60947-1)
Degree of protection IP 67 (IEC 60529; 60947-1)

Ambient temperature
Operating

-25° to +60°C (-13° to +140°F)

Storage -40° to +70°C (-40° to +158°F)
Vibration 10 to 150 Hz, 1.0 mm/15 G

(IEC 60068-2-6)
Shock 30 g / 11ms, 3 pos, 3 neg

per axis
(IEC 60068-2-6, 60068-2-32)

Operation Diagram

Tv = Power ON delay

ON

Power supply

Object

Break Output (N.C.)

Make Output (N.O.)

OFF

Present
Not Present

ON
OFF

ON
OFF

Tv

Rated insulation voltage ≤ 500 VAC (rms)
Housing material

Body ABS Light Grey
Frontglas PMMA Red
Trimmer shaft POM Dark Grey

Connection
Cable PVC, black, 2 m
4 x 0.14 mm2, Ø = 3.3 mm
Plug M8, 4-pin (CON. 54-series)

Weight
Cable version ≤ 50 g
Plug version ≤ 20 g

CE-marking Yes
Approvals cULus (UL508 + CSA)

Tv

Signal Stability Indication

Excess Gain

1.10

1.0

0.90

Green LED ON

Yellow LED ON

Operation level x 1.10

Operation level
Operation level x 0.90

Time

Wiring Diagrams

NPN

PNP

1BN

2WH
4BK

3BU

1BN

4BK
2WH

3BU

2 Specifications are subject to change without notice (14.06.2016)

PD30CND10....SA

PD30CNP
06NPM5T

R

L

U

xxxxxxS

10-30 V
100 mA

BN: V+
BU: V-
BK: OUT
WH: ET

PD30CNP
06NPM5T

R

L

U

xxxxxxS

10-30 V
100 mA

BN: V+
BU: V-
BK: OUT
WH: ET

> 100 mm

Incorrect

Correct

Sensor

Detection Diagram

Sender

Y

X

R27
Kodac test card

Distance (Inches)

0,0 7,9 15,7 23,6 31,5 39,4 47,2 55,1

50
40
30
20
10

0

(mm)

-10

-20

-30

-40

-50
0 200 400 600 800 1.000 1.200 1.400

Distance (mm)

Dimensions

Cable version

10.6

20

Output LED

Yellow

1.1

17

Receiver

Optical axis

Power / Stability LED
Green

10.6

10.8

Two, 9.5 dia.

Lenses

2,0
1,6
1,2
0,8
0,4
0,0

-0,4

-0,8

-1,2

-1,6

-2,0

Potentiometer

Excess Gain

1.000

100

(Inches)

Excess Gain

1.1

7

Distance (Inches)

0,0 0,4 3,9 39,4 393,7

10

1

1 10 100 1.000 10.000

Distance (mm)

Plug version

10.6

20

Output LED

Yellow

17

Receiver

Optical axis

Power / Stability LED
Green

10.6

10.8

Two, 9.5 dia.

Potentiometer

Lenses

1.000

100

10

1

7

5.55.5

Correct

Correct

> 100 mm

22

Emitter

30

25.4

Two M3

Installation Hints

To avoid interference from inductive voltage /
current peaks, separate the proximity switch
cables from any other power cables. E.g.
Engine, contactor or solenoid cables

Incorrect

Delivery Contents

• Photoelectric switch: PD30CND10 ...

• Screwdriver

• Packaging: Plastic bag

5.55.5

30

25.4

15

Two M3

Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier

Incorrect

Incorrect

10.25

22

15

Emitter

Correct

The cable should not be pulled

A proximity switch should not serve
as mechanical stop

Any repetitive flexing of the
cable should be avoided

Accessories

• Mounting bracket APD30-MB1 or APD30-MB2 to be
purchased separately.

Specifications are subject to change without notice (14.06.2016) 3