Datasheet P172ABCJ, P172PCCF, P172PCCJ, P172PCCS, P172PBCJ Datasheet (AGERE)

P172-Type Receiver

Advance Data Sheet

August 2001

Features

■

Low-profile, 8-lead mini-DIL or gull-wing style
package:
— Suitable for SONET/SDH applications

■

Metal package:
— Offers superior shielding for high noise

immunity

■

Planar structure for high reliability

■

Operating wavelength range:
— 1.25 µm—1.6 µm

The P172-Type PIN/Preamp and APD/Preamp receivers are
available in a mini-DIL package (top) or a gull-wing package
(bottom).

■

Available in 8 µm core single-mode fiber or

62.5 µm core multimode fiber pigtails

■

Wide operating temperature range:
— APD/PIN, –40 °C to +85 °C

■

Scheduled to be qualified according to

Technologies

■

Typical sensitivity:

™ GR-468-CORE

Telcordia

— APD, –32 dBm
— PIN, –23 dBm

■

Thermistor in APD version

Applications

■

Long-reach or metro SONET OC-48 and
SDH STM-16, or multidata-rate telecommunica­tions applications

■

SONET/SDH receivers and transponders

■

Line terminal equipment

Benefits

■

Compact size

■

Easily board mounted

Advance Data Sheet

P172-Type Receiver August 2001

DATA

Description

The P172-type receiver consists of a PIN or APD cou­pled to a single-mode or multimode fiber pigtail and a
linear preamplifier. Both the PIN and APD are rear-illu­minated planar diode structures with a low-capacitance
active area for maximum responsivity and speed.

This device incorporates the new Laser 2000 manufac­turing process from the Optoelectronics Products unit
of Agere Systems Inc. Laser 2000 is a low-cost plat­form that targets high-volume manufacturing and tight
product distributions on all optical subassemblies. This
platform incorporates an advanced optical design that
is produced on Agere Systems’ highly automated pro­duction lines. The Laser 2000 platform is qualified for
central office and uncontrolled environments, and can
be used for applications requiring high performance
and low cost.

GND GND

DATA V

4321

56

DATA

GND GND

Figure 1. P172P PIN/Preamp Schematic (Top View)

PD

78

V

CC

1-902(F).b

GND
4321

5678

THERMISTOR

Figure 2. P172A APD/Preamp (Top View)

Table 1. P172-Type PIN/Preamp and APD/Preamp

Pin Descriptions

Pin Number Description

1 Photodiode Bias
2 Case Ground
3DATA*
4 Case Ground
5 Thermis tor /Cas e Grou nd
6DATA
7 Case Ground
8V

* Logic high when light is on.
† Thermistor in APD version; case ground in PIN version
‡ Logic low when light is on.

DATA

GND V

GND

PD

V

CC

‡

CC

1-902(F).c

†

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso­lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.

Parameter Symbol Min Max Unit

Positive Supply Voltage V
Optical Input Power:

APD
PIN

Operating Case Temperature Range:

APD/PIN T
Storage Temperature Range T
Lead Soldering Temperature — — 250 °C
Lead Soldering Time — — 10 s

CC

IN

P

IN

P

C

stg

–0.5 4.0 V

—
—

0

8.0

dBm
dBm

–40 85 °C
–40 85 °C

2

2

Agere System s Inc.

Advance Data Sheet
August 2001 P172-Type Receiver

Electrical Characteristics

Minimum and maximum values specified over operating case temperature range and end of life (EOL), and typical
values are for 25 °C and beginning of life (BOL), unless otherwise specified

Table 2. Electrical Characteristic

Parameter Symbol Min Typ Max Unit

dc Power Supply Voltages:

Positive Supply
APD Operating Bias Voltage

V

V
APD Operating Voltage Temperature Coefficient
PIN Operating Bias Voltage

V

dc Power Supply Currents:

Positive Supply
APD Bias Supply at V
PIN Bias Supply at V

OP

OP

I

I

I
dc Power Dissipation P
Small Signal (<10 µA) Transimpedance T
Input Noise Current (100 kHz—2 GHz) N
Output Return Loss (130 MHz—5 GHz) S
3 dB Bandwidth f
Thermistor resistance at 25 °C* R

CC
OP

—

OP

CC

APD

PIN
DISS

z

rms

22

C

TH

3.15
45

0.07

3.0

—
—
—

3.3
—
—

5.0

55
—
—

3.45
70

0.14
15

101

4
4

— 200 350 mW

1.7 2.5 3.1 kΩ
— 322 466 nArms
— –15 –9 dB

1.7 2.0 — GHz

9.5 10 10.5 kΩ

V
V

V/°C

V

mA
mA
mA

* The resistance of the thermistor is inversely proportional to the temperature. The temperature can be calculated from the resistance value

using the Steinhart-Hart equation: 1/T = A + B ln(R) + C ln(R)
C = 4.5421 x 10

–8

.

3

;

where A, B, and C are constants: A = 1.0267 x 10

–3

,

B = 2.565 x 10

–4

,

Agere Systems Inc.

3

Advance Data Sheet

P172-Type Receiver August 2001

Optical Characteristics

Minimum and maximum values specified over operating case temperature range and end of life (EOL), and typical
values are for 25 °C and beginning of life (BOL), unless otherw is e speci fied .

Table 3. Optical Characteristics

Parameter Symbol Min Typ Max Unit

Optical Wavelength for Rated Sensitivity λ 1.25 — 1.6 µm

P

P

R

RMIN

RMAX

—
—

9.0

8.6

0.81

0.70

—
—

—
—

–6

0

—
—

—
—
—
—

–32.5
–31.5

–23
–22

–3

1

—
—

—
—
—
—

–31
–30

–22
–21

—
—

–27
–14

A/W
A/W
A/W
A/W

dBm
dBm

dBm
dBm

dBm
dBm

dB
dB

Responsivity (at 1310 nm, V

BIAS

= VOP):
APD at –30 dBm, 25 °C
APD at –30 dBm, –40 °C to +85 °C
PIN at –20 dBm, 25 °C
PIN at –20 dBm, –40 °C to +85 °C

Sensitivity (2.5 Gbits/s, 2

23

– 1 PRBS, 1 x 10

1310 nm, 8.2 dB Extinction Ratio, V

APD Version:

At 25 °C
At –40 °C to +85 °C

PIN Version:

At 25 °C
At –40 °C to +85 °C

Overload (2.5 Gbits/s, 2

23

– 1 PRBS, 1 x 10

1550 nm, 8.2 dB Extinction Ratio, V

APD Version
PIN Version

Optical Return Loss:

Single-mode Fiber
Multimode Fiber

BIAS

BIAS

–10

= VOP):

–10

BER,

= VOP):

BER,

4

Agere System s Inc.

Advance Data Sheet
August 2001 P172-Type Receiver

Outline Diagrams

P172-Type Through-Hole Package

Dimensions are in inches and (millimeters).

0.045 (1.14)

0.010
(0.25)

LEAD TRIM

0.315
(8.00)

0.195
(4.95)

4321

5678

0.565

(14.35)

0.100
(2.54)

NOSE GEOMETRY

0.974

(24.74)

BEND LIMITER

0.016 (0.41) 8 PLACES

0.155
(3.94)

MIN.

0.144
(3.66)

0.900 µm

FIBER

0.170
(4.32)

0.300
(7.62)

0.010
(0.25)

8 PLACES

0.079
(2.01)

MIN

0.431

(10.95)

STANDOFF

0.010 (0.25) MAX

CONNECTOR

FIBER LENGTH

1-1057F

Agere Systems Inc.

5

Advance Data Sheet

P172-Type Receiver August 2001

Outline Diagrams

(continued)

P172-Type Gull-Wing Package

Dimensions are in inches and (millimeters).

0.045 (1.14)

0.315
(8.00)

0.010

(0.25)

LEAD TRIM

0.195
(4.95)

4321

5678

0.565

(14.35)

0.100
(2.54)

NOSE GEOMETRY

0.974

(24.74)

MIN.

BEND LIMITER

0.016 (0.41) 8 PLACES

0.155
(3.94)

0.144
(3.66)

0.900 M

0.170

µ

FIBER

(4.32)

0.047 ± 0.008
(1.19 ± 0.20)

0.020 ± 0.005
(0.50)

0.079
(2.01)

MIN

0.431

(10.95)

STANDOFF

0.010(0.25) MAX

CONNECTOR

FIBER LENGTH

1-1057F.a

6

Agere System s Inc.

Advance Data Sheet

y

g

g

y

August 2001 P172-Type Receiver

Qualification Information

The P172-type receiver is scheduled to complete the following qualification tests and meet the intent of

Technologies

Table 4. P172Type Qualification Information

Mechanical Shock
and Vibration

Thermal Shock MIL-STD-883

Lead Integrity MIL-STD-883

Solderability MIL-STD-883

Low Temperature
Storage

High Temperature
Storage

Temperature
Cycling

Damp Heat MIL-STD-883

Cyclic Moisture
Resistance

ESD Threshold

Internal Moisture MIL-STD-883

GR-468-CORE.

Test Reference Conditions Sample Size Pass/Fail Criteria

Telcordia Technologies

GR-468-CORE,

Section 8.3.2

Method 1011

Method 2004

Method 2003

—

—

Telcordia Technologies

GR-468-CORE,

Section 5.20

Method 103

Telcordia Technologies

GR-468-CORE,

Section 5.23

Telcordia Technologies

GR-468-CORE,

Section 5.22

Method 1018

500 g, 0.5 ms
Condition A, 20 g,
20 Hz to 2000 Hz,

4 min./cycle,

4 cycles

0°C to 100 °C,

20 c

cles

Condition A To Be Provided by

—To Be Provided by

–40 °C stora

2000 hours

85°C stora

2000 hours

–40 °C to +85 °C,

500 c

85 °C/85% RH

1000 hours

— 11 10% Responsivity

—6

— 11 Pieces After

e

e

cles

11 10% Responsivity

Change After Completion

of Both Tests

11 Physical Attributes and

Leak Check

the Supplier

the Supplier

11 10% Responsivity

Change After Completion

of Test

11 10% Responsivity

Change After Completion

of Test

11 10% Responsivity

Change After Completion

of Test

11 10% Responsivity

Change After Completion

of Test

Change After Completion

of Test

Telcordia

Max 5000 ppm Water

Thermal Shock

Test

Vapor After Other Test

Cells

—

—

Requirement

Telcordia

Agere Systems Inc.

7

Advance Data Sheet

P172-Type Receiver August 2001

Ordering Information

Table 5. P172-Type Receiver Ordering Information

Product Code Detector Type Connector type Lead type Fiber type Comcode

P172ABCA APD SC/PC Through Hole SMF 108566076

P172ABCF APD FC/PC Through Hole SMF 108566084

P172ABCS APD LC Through Hole SMF TBD

P172ABCJ APD MU Through Hole SMF TBD

P172ACCA APD SC/PC Gull Wing SMF 109122325

P172ACCF APD FC/PC Gull Wing SMF TBD

P172ACCS APD LC Gull Wing SMF TBD

P172ACCJ APD MU Gull Wing SMF TBD

P172PBCA PIN SC/PC Through Hole SMF 108566100

P172PBCF PIN FC/PC Through Hole SMF 108566118

P172PBCS PIN LC Through Hole SMF TBD

P172PBCJ PIN MU Through Hole SMF TBD
P172PCCA PIN SC/PC Gull Wing SMF TBD
P172PCCF PIN FC/PC Gull Wing SMF TBD
P172PCCS PIN LC Gull Wing SMF TBD

P172PCCJ PIN MU Gull Wing SMF TBD

P172PBAA PIN SC/PC Through Hole MMF TBD

P172PBAF PIN FC/PC Through Hole MMF 109113274

P172PBAS PIN LC Through Hole MMF TBD

P172PBAJ PIN MU Through Hole MMF TBD

P172PCAA PIN SC/PC Gull Wing MMF TBD

P172PCAF PIN FC/PC Gull Wing MMF TBD
P172PCAS PIN LC Gull Wing MMF TBD

P172PCAJ PIN MU Gull Wing MMF TBD

Table 6. Related Product Information

Product Code Description Document Number

R485 2.5 Gbits/s Receiver with Clock Recovery DS01-005OPTO
R480 2.5 Gbits/s Receiver with CML Data Output DS01-011OPTO

Telcordia Technologies

For additional information, contact your Agere Systems Account Ma na ger or the following:
INTERNET:
E-MAIL:
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286

ASIA: Agere Systems Hong Kong Ltd., Suites 3201 & 3210-12, 32/F, Tower 2, The Gateway, Harbour City, Kowloon

EUROPE:

Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.

Copyright © 2001 Agere Systems Inc.
All Rights Reserved

August 2001
DS01-283OPTO (Replaces DS99-198L WP-2 )

is a trademark of Telcordia Technologies, Inc.

http://www.agere.com
[e-mail]

1-800-372-2447
Tel. [phone]

CHINA:
JAP AN:

Tel. [phone]

, FAX [phone] (In CANADA:

(86) 21-5047-12 12
(81) 3-5421-160 0

, FAX [phone]

(Shanghai),

(Tokyo), KOREA:

, FAX [phone]

1-800-553-2448

(86) 10-6522-5566

(82) 2-767-1850

, FAX [phone])

(Beijing),

(86) 755-695-7224

(Seoul), SINGAPORE:

(Shenzhen)

(65) 778-8833

, TAIWAN:

(886) 2-2725-5858

(Taipei)