Low-profile, 4-lead mini-DIL package:
— Suitable for SONET applications
■
Optional differential output in a 6-lead mini-DIL
package
■
Transimpedance amplifier with automatic gain
control (AGC)
■
Metal package:
— Offers superior shielding for high noise
immunity
■
High performance:
— High speed (<0.5 ns typical rise and fall time)
The P171-Type PIN/Preamp features a rear -illuminated planar
diode structure with low capacitance.
— High responsivity (0.85 A/W typical)
— Low dark current
■
Planar structure for high reliability
■
Wavelength: 1.1 µ m—1.6 µ m
■
50 µ m core multimode fiber
■
Wide operating temperature range:
— –40 ° C to +85 ° C
■
Wide bandwidth
■
Qualification program:
Telcordia Technologies
TA-NWT-983
■
Typical sensitivity:
— –38 dBm at 155 Mbits/s
— –33 dBm at 622 Mbits/s
*
Applications
■
Long-reach SONET OC-3/OC-12 and SDH
STM-1/STM-4 telecommunications applications
■
Secure digital data systems
■
Line terminal equipment
Benefits
■
Compact size
■
Easily board mounted
*
T elcordia Technologies
Technologies, Inc.
is a registered trademark of Telcordia
Page 2
Advance Data Sheet
P171-Type PIN/PreampNovember 2000
Description
The P171-type mini-DIL PIN/preamp consists of a PIN
coupled to a multimode fiber pigtail and a wideband linear preamplifier. The PIN incorporated is a rear-illuminated planar diode structure with a low-capacitance
active area for maximum responsivity and speed.
This device incorporates the new laser 2000 manufacturing process from the Optoelectronics Products unit
of Agere Systems Inc. Laser 2000 is a low-cost platform that targets high-volume manufacturing and tight
product distributions on all optical subassemblies. This
platform incorporates an advanced optical design that
is produced on highly automated production lines. The
laser 2000 platform is qualified for central office and
uncontrolled environments, and can be used for applications requiring high performance and low cost.
DATAPHOTODIODE
V
CC
12
BIAS
43
DATAPHOTODIODE
V
CC
1A
DATA
3A
12
BIAS
43
Figure 2. P171-Type R-PAK PIN/Preamp with
Optional Differential Output Schematic
(T op View)
Table 2. Pin Descriptions for Optional Differential
Output Connection
Pin NumberDescription
1Photodiode bias
ATA
1A
D
2DATA
3V
CC
3ANC
4Case ground
Figure 1. P171-Type R-PAK PIN/Preamp Schematic
(T op View)
Table 1. Pin Descriptions
Pin NumberDescription
1Photodiode bias
2DATA
3V
CC
4Case ground
22
Agere Systems Inc.
Page 3
°
°
Advance Data Sheet
November 2000P171-Type PIN/Preamp
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
ParameterSymbolMinMaxUnit
Operating Temperature RangeT
Storage Temperature RangeT
Forward VoltageV
Reverse Voltage*V
V
CC
A
stg
F
R
V
CC
Photocurrent——4mA
Humidity——95%
* The recommended reverse bias voltage is 5 V to 15 V.
–4085
–4090
C
C
—0V
—30V
06V
Agere Systems Inc.
3
Page 4
λ
µ m
Advance Data Sheet
P171-Type PIN/PreampNovember 2000
Electrical Characteristics
T
C
= 25 ° C.
Table 3A. Electrical Characteristics
ParameterSymbolMinTypMaxUnit
Dark CurrentI
D
Table 3B. Electrical Characteristics at 155 Mbits/s and 622 Mbits/s
—1 5nA
ParameterSymbol
155 Mbits/s 622 Mbits/s
MinTypMaxMinTypMax
V
CC
V
PIN
Transimpedance (differential-ended
V
CC
V
PIN
4.555.533.33.6V
35153515V
Z200—2604.567.5k Ω
output, 6-pin) Linear Range*
Transimpedance (single-ended output,
Z45—80———k
4-pin) Linear Range*
* Open circuit small signal gain. AGC activates beyond approximately –30 dBm.
Optical Characteristics
T
C
= 25 ° C.
Table 4A. Optical Characteristics
ParameterSymbolMinTypMaxUnit
ResponsivityR0.750.85—A/W
Wavelength Range
Table 4B. Optical Characteristics at 155 Mbits/s and 622 Mbits/s
1.1—1.6
Unit
Ω
ParameterSymbol
Unit
MinTypMaxMinTypMax
BandwidthBW110150—460590700MHz
155 Mbits/s 622 Mbits/s
SensitivityP
OverloadP
Lower Cut-off Frequencyf
4
LOW
HIGH
CUTOFF
—–38–36—–33–30dBm
00.5—–8–6—dBm
——10——150kHz
Agere Systems Inc.
Page 5
Advance Data Sheet
November 2000P171-Type PIN/Preamp
Outline Diagrams
P171-Type PIN/Preamp—Standard Output
Dimensions are in inches and (millimeters).
21
Ø 0.180
(4.57)
0.250
(6.35)
0.195
(4.95)
0.114
(2.90)
0.016
(0.41)
34
0.310
(7.87)
0.100
(2.54)
+
Ø 0.04
(1.02)
0.012
TYP
(0.30)
A
45.28 ±1.57
1.25 MAX
(31.75)
0.100
A
(2.54)
(1150 ±40)
FIBER
0.300
(7.62)
SECTION A-A
Agere Systems Inc.
OPTICAL
CONNECTOR
1-933
5
Page 6
Advance Data Sheet
P171-Type PIN/PreampNovember 2000
Outline Diagrams
(continued)
P171-Type PIN/Preamp—Differential Output
Dimensions are in inches and (millimeters).
21A1
0.250
(6.35)
33A4
0.310
(7.87)
A
1.25 MAX
(31.75)
FIBER LENGTH
Ø 0.04
(1.02)
Ø 0.180
(4.57)
0.012
TYP
(0.30)
+
0.300
(7.62)
SECTION A-A
0.195
(4.95)
0.114
(2.90)
0.016 (0.41)
0.050 (1.27)
0.100 (2.54)
FIBER
0.100
A
(2.54)
OPTICAL
CONNECTOR
1-932
6
Agere Systems Inc.
Page 7
∆
Advance Data Sheet
November 2000P171-Type PIN/Preamp
Qualification Information
The P171-type PIN/preamp is scheduled to complete the following qualification tests and meets the intent of
cordia Technologies
TR-NWT-000468 for interoffice environments and TA-NWT-000983 for outside plant environ-
ments.
Table 5. P171-Type PIN/Preamp Qualification Test Plan
TestConditionsSample SizeReference
Mechanical Shock500 G11 MIL-STD-883
Method 2002
Vibration20 g, 20 Hz—2000 Hz11 MIL-STD-883
Method 2007
Solderability—11 MIL-STD-883
Method 2007
Thermal Shock
T = 100 ° C11 MIL-STD-883
Method 2003
Fiber Pull1 kg; 3 times11
Accelerated (biased) Aging85 ° C, 5000 hrs.25
Telcordia T echnolo-
gies
983
Telcordia T echnolo-
gies
983
Section 5.18
High-temperature Storage85 ° C, 2000 hrs.11
Temperature Cycling500 cycles11
Telcordia T echnolo-
gies
983
Telcordia T echnolo-
gies
983
Section 5.20
Cyclic Moisture Resistance10 cycles11
Telcordia T echnolo-
gies
983
Section 5.23
Damp Heat40 ° C, 95% RH, 1344 hrs.11 MIL-STD-202
Method 103
Internal Moisture<5000 ppm water vapor11 MIL-STD-883
For additional information, contact your Agere Systems Account Manager or the following:
INTERNET:
E-MAIL:
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286
ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
CHINA:Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC
JAPAN:Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
EUROPE:Data Requests: DATALINE:
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.