Datasheet OVSARGB3R8 Datasheet (OPTEK)

Full Color PLCC4 LED

OVSARGB3R8

x Surface mount device packaged in 8 mm tape on 7” diameter reel
x Compatible with automatic placement equipment
x Compatible with infrared and vapor phase reflow solder
x Dimensions: 3.5 x 2.8 x 1.9 mm
x 120° viewing angle

The OVSARGB3R8 provides full color light output from a single package, 3-die design. This surface mount
package is an efficient solution in modular applications that require uniform brightness and color-on-demand.
Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging
from hand-held appliances to automotive interiors.

Applications

x RGB + white full-color indoor and outdoor displays
x Backlighting
x Coupling into light guides
x Automotive interiors
x Entertainment equipment

Product Photo Here

Part Number

OVSARGB3R8

1,3,4 CATHODE 2 ANODE

RoHS

Chip

Type Material Emitted Color Intensity Typ. mcd

R AlInGaP Red 300
G InGaN Green 450
B InGaN Blue 110

Pin # Description

1 Red-Cathode
2 Common Anode
3 Blue-Cathode
4 Green-Cathode

2

[MILLIMETERS]

DIMENSIONS ARE IN:

INCHES

DO NOT LOOK DIRECTLY

AT LED WITH UNSHIELDED

EYES OR DAMAGE TO

RETINA MAY OCCUR.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Lens Color

Water Clear

1

3

4

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A.1 07/06

Page 1 of 7

Full-Color PLCC4 LED

OVSARGB3R8

Absolute Maximum Ratings

TA = 25o C unless otherwise noted

PARAMETER

UNIT

R G B

Storage Temperature -40 ~ +100 °C
Operating Temperature -40 ~ +100 °C

RATING

Reverse Voltage V

5

Continuous Forward Current1 50 25 25 mA

Peak Forward Current (10% Duty Cycle, PW  sec) 200 100 100 mA

Power Dissipation 130 105 105 mW

Junction Temperature 110 110 110 °C

Junction/ambient (1 chip on)2 450 400 450 °C/W

Junction/ambient (3 chips on)2 650 580 680 °C/W

Junction/solder point (1 chip on) 300 280 300 °C/W

Junction/solder point (3 chips on) 450 430 480 °C/W

Notes:

1. Single color light

2. Rth test condition: Mounted on PC board FR 4 (pad size



2

)

Electrical Characteristics

TA = 25o C unless otherwise noted

SYMBOL PARAMETER

UNIT CONDITIONS

R G B

Min 180 280 71

VALUES

IV Luminous Intensity

Typ 300 450 110

mcd I

F

Typ 2.3 3.6 3.6

VF Forward Voltage

V I

Max 2.6 4.2 4.2

IR Reverse Current (max) 10 10 10 µA VR = 5 V

Dominant Wavelength

D

Wavelength at Peak Emission

P

2 ½ 50% Power Angle

Spectrum Radiation Bandwidth

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

612–625 520–540 460–480 nm I

620 520 465 nm I

120 120 120 deg I

24 38 28 nm I

= 20 mA

= 20 mA

F

= 20 mA

F

= 20 mA

F

= 20 mA

F

= 20 mA

F

Issue A.1 07/06
Page 2 of 7

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Full-Color PLCC4 LED

OVSARGB3R8

Standard Bins (I

=2 0 mA)

F

Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown.
Orders for OVSARGB3R8 may be filled with any or all bins contained as below.

Red

450

280 T

Luminous

Intensity (mcd)

180 S

612 625

Dominant Wavelength (nm)

Green

710

450 U

Luminous

Intensity (mcd)

280 T

520 540

Dominant Wavelength (nm)

Luminous intensity is at
S bin or above.

Luminous intensity is at
T bin or above.

Blue

180

112 R

Luminous

Intensity (mcd)

Notes:

1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.

2. Tolerance of measurement of luminous intensity is ±10%.

3. Tolerance of measurement of dominant wavelength is ±1 nm.

4. Tolerance of measurement of VF is ±0.05V.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

71 Q

460 480

Dominant Wavelength (nm)

Luminous intensity is at
Q bin or above.

Issue A.1 07/06

Page 3 of 7

Full-Color PLCC4 LED

OVSARGB3R8

Typical Electro-Optical Characteristics Curves

Relative Intensity vs Dominant Wavelength

IF(mA)

IF(mA)

VF(V)

VF(V)

Forward Current vs Forward Voltage

Percent (%)

IF(mA)

Percent (%)

IF(mA)

Relative Luminous Intensity vs Forward Current

Issue A.1 07/06
Page 4 of 7

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Full-Color PLCC4 LED

OVSARGB3R8

Typical Electro-Optical Characteristics Curves

1 Chip On 3 Chips On

IF(mA)

IF(mA)

IF(mA)

TA(°C)

TA(°C)

Maximum Forward DC Current vs Solder Point Temperature

1 Chip On 3 Chips On

IF(mA)

TA(°C)

TA(°C)

Maximum Forward DC Current vs Ambient Temperature

50% Power Angle: 120°

Far Field Pattern

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A.1 07/06

Page 5 of 7

Full-Color PLCC4 LED

OVSARGB3R8

CIE Graph

Notes:

1. The color coordinates of the mixed light can be expected within the area of the color triangle marked a).

2. The achromatic point (x = 0.33, y = 0.33) is marked “+”.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Issue A.1 07/06
Page 6 of 7

Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Full-Color PLCC4 LED

OVSARGB3R8

Reel Dimensions: 7-inch reel

Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel

Moisture Resistant Packaging

Label Aluminum Moisture-proof Bag Desiccant Bar Code Label

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com

Issue A.1 07/06

Page 7 of 7