Page 1
Stationary read device OPC120P-F201-B17
Function
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and
detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces
and at varying intervals, or performing various detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor close at hand.
Electrical connection
R
Model Number
OPC120P-F201-B17
Optical Print Inspector, reading of Data
Matrix codes, PROFINET, speeds up to
10 m/sec, polarization filter
Features
• Reading on highly reflective surfaces
with new polarization filter
• PROFINET interface with integrated
switch
• Reads Data Matrix codes at high
speeds of up to 10 m/s at
50 readings/s
Pinout
Main
Bus
1
2
3
4
5
6
7
8
1
2
3
4
IN TRIGGER
+ UB
USB_DM
USB_DP
NC
NC
GND
NC
TX +
RX +
TX -
RX -
Profinet 1 & 2Main
1
8
7
2
6
53
4
1
4
2
3
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Technical data
General specifications
Light type Integrated LED lightning (white)
Polarization filter yes
Symbologies Data Matrix
Read distance 70 ... 180 mm
Reading field Minimum read field: 28 mm x 45 mm
Modul size Minimum module size: 0.2 mm
Evaluation frequency up to 50 Hz
Target velocity triggered ≤ 10 m/s
Data Matrix
Symbol size rectangular up to 144 x 144 modules
Data format ASCII, C40, Text, X12, Edifact, Base 256 , all according to
Orientation omnidirectional
Nominal ratings
Camera
Ty p e CMOS , Global shutter
Number of pixels 752 x 480 pixels
Gray scale 256
Image recording real-time , Program-controlled or triggered externally
Functional safety related parameters
MTTFd 40.5 a
Mission Time (TM) 8 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
LED indicator 7 LEDs (communication, alignment aid, status information)
Nominal distance: 120 mm
Read field at nominal distance: 45 mm x 70 mm
Maximum read field: 65 mm x 105 mm
rectangular up to 16 x 48 modules
ISO 646
1
Page 2
OPC120P-F201-B17Stationary read devic e
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
No-load supply current I
Power consumption P
Interface
Interface type 100 BASE-TX
Protocol PROFINET IO Real-Time (RT) Conformance class A
Transfer rate 100 MBit/s
Output
Switching type PNP
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Cable length max. 30 m
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 85 °C (-4 ... 185 °F)
Relative humidity 90 % , noncondensing
Mechanical specifications
Degree of protection IP65
Connection 8-pin, M12x1 connector, standard (supply+IO) ,
Material
Housing PC/ABS
Optical face Plastic pane
Installation 4 x M6 threading
Mass approx. 200 g
Compliance with standards and directives
Standard conformity
Noise immunity EN 61326-1:2006
Emitted interference EN 61000-6-4:2007/A1:2011
Degree of protection EN 60529
Laser class IEC 60825-1:2007
max. 300 mA
0
6 W
0
4-pin, M12x1 socket, D-coded (LAN) ,
4-pin, M12x1 socket, D-coded (LAN)
Accessories
V19-G-2M-PUR-ABG
Female cordset, M12, 8-pin, shielded,
PUR cable
V1SD-G-2M-PUR-ABG-V45-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V1SD-G-2M-PUR-ABG-V45X-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V19-G-ABG-PG9
Female connector, M12, 8-pin, shielded,
field attachable
V19-G-0,2M-YOPC-0,2M-V1S/V31-G
Y connection cable
ries can be found at
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source, Type 1
CCC approval CCC approval / marking not required for products rated ≤36 V
Approvals CE
enclosure
Curves / Diagrams
Image field dimensions
Image field
60
50
40
30
20
10
0
10
20
30
40
50
0 20 40 60 80 100 120 140 160 180 200
Width Y
Width X
(Nominal distance)Operating distance [mm]
60
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Page 3
Stationary read device OPC120P-F201-B17
Read ranges
DataMatrix
0 40 60 80 100 120 140 160 180 200
Dimensions
0.5 mm
0.4 mm
0.3 mm
M6 x 9 (4x)
(Nominal distance)Operating distance
25
[mm]
25
21.75
12.5
M12
83.8
70
M12
54
12
70
10
Indicators/Controls
The Optical Print Inspector is equipped with seven indicator LEDs for carrying out visual
function checks and rapid diagnostics. In addition, the device is fitted with two buttons on the
back of the unit.
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
3
Page 4
OPC120P-F201-B17Stationary read devic e
1
CONFIG
BUS / ERR
GOOD / BAD
BUS TX / RX
2
BUS LINK
LED 1 2 3 4 5 6 7
TRIGGER
RUN
DIAGNOSTIC
INTERNAL
LED Color Label Description
1Green BUS Link PROFINET connection activated
2 Yellow BUS TX / RX PROFINET data transfer
3 Red BUS / ERR PROFINET communication error
4 Green/red GOOD / BAD Reading successful/failed
5 Yellow TRIGGER Trigger sensor triggered
6 Yellow RUN Device ready for operation
7Red/yel-
low/green
INTERNAL
DIAGNOSTICS
Diagnostic message
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
4
Loading...