Page 1
D
ATA SHEET
O K I L A S E R P R O D U C T S
OD9601N (1.25 Gbps)
OD9602N (622 Mbps)
OD9604N (2.488 Gbps)
+ 3.3-V Photo Diode Preamp Modules
February 2000
Page 2
■ ■
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CONTENTS
OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family
OD9601N
OD9602N
OD9604N
...................................................................................................................................... 3
...................................................................................................................................... 7
.................................................................................................................................... 11
..................... 1
Oki Semiconductor
Page 3
OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family
InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9601N, OD9602N, and OD9604N PD Preamp Module Family are surface-mount
1.3-µm, InGaAs PIN photo diodes combined with a transimpedance amplifier. The OD9601N operates at
1.25 Gbps in STM4/OC12/OC24 environments. The OD9602N operates at 622 Mbps in STM4/OC12
environments. The OD9604N operates at 2.488 Gbps in STM16/OC48 environments.
The OD9601N, OD9602N, and OD9604N use a single + 3.3-V power supply, provide a differential output
signal, and are available in an 8-pin Mini-Dil package. These photo diode preamp modules are coupled
to a single-mode fiber with a pigtail.
GENERAL FEATURES
• Surface-mount Mini-Dil package
• Low cost
• Operating Performance:
- OD9601N 1.25 Gbps operation
- OD9602N 622 Mbps operation
- OD9604N 2.488 Gbps operation
• Peak-sensitivity wavelength: 1300 nm
GENERAL APPLICATION
• Optical transmission systems
- OD9601N 1.25 Mbps,
- OD9602N 622 Mbps,
- OD9604N 2.488 Gbps,
• Optical transmission modules (receiver section)
• Optical receivers
• Inter-office interconnection
• Gigabit Ethernet (OD9601N / OD9604N)
• Ethernet (OD9602N)
STM4/OC12/OC24
STM4/OC12
STM16/OC48
1Oki Semiconductor
Page 4
■
OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family ■ ––––––––––––––––––––––––––––––––
Notes
2 Oki Semiconductor
Page 5
OD9601N Photo Diode Preamp Module
1.25-Gbps InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9601N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9601N is designed to operate at 1.25 Gbps in
STM4/OC12/OC24 environments. This photo diode uses a single + 3.3-V power supply and provides a
differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode
fiber with a pigtail.
FEATURES
• Surface-mount Mini-Dil package
• Low cost
• 1.25 Gbps operation
• Peak-sensitivity wavelength: 1300 nm
APPLICATION
• Optical transmission modules (receiver section)
• Optical receivers
• Inter-office interconnection
• Gigabit Ethernet
3Oki Semiconductor
Page 6
■
OD9601N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage
Incident Optical Power
Operating Case Temperature
Storage Temperature
Soldering Profile
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.
Optical and Electrical Characteristics
(Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted)
Parameter
Supply Voltage
Supply Current
Low Frequency Cutoff
Rise / Fall Time
Sensitivity
Differential Output Voltage
Optical Modulation Bandwidth -3 dBm
Differential Responsivity Differential, measured with -22 dBm input signal 2.7 3.4 4.1 kV / W
Input Noise Equivalent Optical Power BW=1500 MHz, Pin=0 mW - 0.23 - µW
Symbol Ratings Units
V
s
P
IOP
T
opr
T
stg
T
sol
Pin= -22 dBm, fr = 50 MHz
BER < 10
Pin= - 22 dBm, fr = 50 MHz
6
-3
- 40 to + 85
- 40 to + 85
230 (30)
Test Conditions Min. Typ. Max. Units
- +3.0 +3.3 +3.6 V
- - 26 50 mA
-3 dBm
20% to 80%
Pin= -3 dBm
-12
(See note 1) - -28 - dBm
Pin= -3 dBm 185 250 415 mV
mW
dBm
°C
°C
°C (sec)
- 44 - kHz
- - 300 ps
750 820 1100 MHz
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2
Contact Oki Semiconductor sales office for reliability report.
23
-1.
Connector and Fiber Specifications
Connector FC-PC, SC-PC, MUJ-PC etc
Fiber 1.31-µm single-mode fiber
4 Oki Semiconductor
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Page 7
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9601N Photo Diode Preamp Module
PACKAGE DIMENSIONS
(Units: mm)
■
2.5
2.5
R1
7.62
1.0
1. 8
0.25
0.46
11.2
8
1 4
2.54 x 3
5
1.75
Pin Configuration
Pin No.
01 V
02 GND 06 NC
03 GND 07 NC
04 Output (-) 08 GND
Description Pin No. Description
CC
05 Output (+)
5.6
0.17
(TOP VIEW)
3 max
5Oki Semiconductor
Page 8
■
OD9601N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
6 Oki Semiconductor
Page 9
OD9602N Photo Diode Preamp Module
622 Mbps InGaAs Technology (+ 3.3 V)
introduction
Oki Semiconductor’s OD9602N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9602N is designed to operate at 622 Mbps in
STM4/OC12 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber
with a pigtail.
FEATURES
• Surface-mount Mini-Dil package
• Low cost
• 622 Mbps operation
• Peak-sensitivity wavelength: 1300 nm
APPLICATION
• Optical transmission modules (receiver section)
• Optical receivers
• Inter-office interconnect
• Ethernet
7Oki Semiconductor
Page 10
■
OD9602N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage
Incident Optical Power
Operating Case Temperature
Storage Temperature
Soldering Profile
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device
Optical and Electrical Characteristics
(Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted)
Parameter
Supply Voltage
Supply Current
Low Frequency Cutoff
Sensitivity
Differential Output Voltage
Optical Modulation Bandwidth -3 dBm
Differential Responsivity Differential, measured with -22 dBm input signal 3.7 - 6.8 kV / W
Symbol Ratings Units
Vs
P
IOP
Topr
Tstg
Tsol
Test Conditions Min. Typ. Max. Units
Pin= -23 dBm, fr = 50 MHz
BER < 10
Pin= - 22 dBm, fr = 50 MHz
5.5
4
- 40 to + 85
- 40 to + 85
230 (30)
- +3.0 +3.3 +3.6 V
-122535mA
-3 dBm
-10
(See note 1) - -33.2 - dBm
Pin= -3 dBm - - 950 mV
V
dBm
°C
°C
°C (sec)
- - 150 kHz
450 590 - MHz
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2
Contact Oki Semiconductor sales office for reliability report.
23
-1.
Connector and Fiber Specifications
Connector FC-PC, SC-PC, MUJ-PC etc
Fiber 1.31-µm single-mode fiber
8 Oki Semiconductor
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Page 11
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9602N Photo Diode Preamp Module
PACKAGE DIMENSIONS
(Units: mm)
■
2.5
2.5
R1
7.62
1.0
1. 8
0.25
0.46
11.2
8
1 4
2.54 x 3
5
1.75
Pin Configuration
Pin No.
01 V
02 GND 06 NC
03 GND 07 GND
04 Output (-) 08 GND
Description Pin No. Description
CC
05 Output (+)
5.6
0.17
(TOP VIEW)
3 max
9Oki Semiconductor
Page 12
■
OD9602N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
10 Oki Semiconductor
Page 13
OD9604N Photo Diode Preamp Module
2.488 Gbps InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9604N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9604N is designed to operate at 2.488 Gbps in
STM16/OC48 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber
with a pigtail.
FEATURES
• Surface mount Mini-Dil package
• Low cost
• 2.488 Gbps operation
• Peak-sensitivity wavelength: 1300 nm
APPLICATION
• High-speed optical transmission modules (receiver section)
• High-speed optical receivers
• Inter-office interconnect
• Gigabit Ethernet
11Oki Semiconductor
Page 14
■
OD9604N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage V
Optical Input Power P
Operating Case Temperature (Ta) T
Storage Temperature T
Soldering Profile T
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.
Optical and Electrical Characteristics
(Ta=25°C, V
Supply Voltage - +3.0 +3.3 +3.6 V
Supply Current - - 26 50 mA
Optical Modulation Bandwidth f
Responsivity Differential, measured with -17 dBm input signal 1230 - 1860 V / W
Input Current before Clipping - -16 - - dBm
Differential Output Voltage - 185 250 415 mVp-p
Sensitivity BER < 10
Optical Overload AC Input -2 - - dBm
Low Frequency Cutoff f
=3.3 V, λ=1310 nm unless otherwise noted)
CC
Parameter
Symbol Ratings Units
s
IOP
opr
stg
sol
Test Conditions Min. Typ. Max. Units
6V
4mW
- 40 to + 85 °C
- 40 to + 85 °C
260 (10) °C (sec)
3 dB
-10
(See note) - -23.0 - dBm
3 dB
1400 - - MHz
- 44 - kHz
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2
Contact Oki Semiconductor sales office for reliability report.
23
-1.
Connector and Fiber Specifications
Connector FC-PC, SC-PC, MUJ-PC etc
Fiber 1.31-µm single-mode fiber
12 Oki Semiconductor
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Page 15
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9604N Photo Diode Preamp Module ■
PACKAGE DIMENSIONS
(Units: mm)
2.5
2.5
R1
7.62
1.0
1. 8
0.25
0.46
11.2
8
1 4
2.54 x 3
5
5.6
1.75
3 max
0.17
Pin Configuration
Pin Mo. Description Pin No. Description
01 V
CC
02 GND 06 NC
03 GND 07 GND
04 Output (+) 08 GND
05 Output (-)
(TOP VIEW)
13Oki Semiconductor
Page 16
■ OD9604N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
14 Oki Semiconductor
Page 17
The information contained herein can change without notice owing to product and/or technical improvements.
Please make sure before using the product that the information you are referring to is up-to-date.
The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action
and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in
the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect,
improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited
to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with
the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a
third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges,
including but not limited to operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office
automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for
use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application
where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such
applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including
life support and maintenance.
Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser
assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their
own expense, for export to another country.
Copyright 2000 Oki Semiconductor
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by
Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki
Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is
granted under any patents or patent rights of Oki.
Oki Semiconductor
Page 18
Oki REGIONAL SALES OFFICES
Northwest Area
785 N. Mary Avenue
Sunnyvale, CA 94086
Tel: 408/720-8940
Fax: 408/720-8965
North Central Area
300 Park Blvd.
Suite 365
Itasca, IL 60143
Tel: 630/250-1313
Fax: 630/250-1414
Northeast Area
138 River Road
Shattuck Office Center
Andover, MA 01810
Tel: 978/688-8687
Fax: 978/688-8896
Southwest Area
2302 Martin Street
Suite 250
Irvine, CA 92715
Tel: 949/752-1843
Fax: 949/752-2423
Southeast Area
1590 Adamson Parkway
Suite 220
Morrow, GA 30260
Tel: 770/960-9660
Fax: 770/960-9682
Oki Web Site:
http://www.okisemi.com
For Oki Literature:
Call toll free 1-800-OKI-6388
(6 a.m. to 5 p.m. Pacific Time)
Oki Stock No:
320191-001
Corporate Headquarters
785 N. Mary Avenue
Sunnyvale, CA 94086-2909
Tel: 408/720-1900
Fax: 408/720-1918
Loading...