Page 1
max
Organic Conductive Polymer Capacitors
OCR
Features
‧
105℃, 2,000 hours assured
‧
Ultra low ESR with large permissible ripple current
‧
RoHS Compliance
SPECIFICATIONS
Items Performance
Date code
Series name
Rated cap
.
Rated voltage
-55℃ ~ +105℃
±20% (at 120Hz, 20℃)
Within ±20% of initial value
Within ±20% of initial value
Within ±10% of initial value
φD
L 5.5 6.5 11 11.5 10 12.5
P 2.5 3.5 5.0
φd
α
β
6.3 8 10
0.45 0.6
1.0 1.5
Category Temperature Range
Capacitance Tolerance
Leakage Current (at 20 )℃*
Dissipation Factor
(Tanδ at 120Hz, 20 )℃
ESR (at 100k ~ 300k Hz, 20 )℃ See Standard Ratings
Test Time 2,000 Hrs
Capacitance Change
Endurance Dissipation Factor Less than 150% of specified value
ESR Less than 150% of specified value
Leakage Current Within specified value
Test Time 1,000 Hrs
Capacitance Change
Moisture Resistance Dissipation Factor Less than 150% of specified value
ESR Less than 150% of specified value
Leakage Current Within specified value
Resistance to Soldering Heat *
(Please refer to page 10 for soldering
conditions)
Ripple Current &
Frequency Multipliers
* For any doubt about measured values, measure the leakage current again after the following voltage treatment.
Voltage treatment: Applying DC rated voltage to the capacitors for 2 hours at 105 oC.
Rated voltage applied, after 2 minutes at 20℃.
See Standard Ratings
See Standard Ratings
* The above specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied
for 2,000 hours at 105℃.
* The above specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them at 60℃,
90 to 95% RH for 1,000 hours. Leakage current should be tested after voltage treatment*.
Frequency (Hz)
Multiplier 0.05 0.3 0.7 1.0
Capacitance Change
Dissipation Factor Less than 130% of specified value
ESR Less than 130% of specified value
Leakage Current Within specified value
120 ≦ f < 1k 1k ≦ f < 10k 10k ≦ f < 100k 100k ≦ f < 500k
DIAGRAM OF DIMENSIONS
LEAD SPACING AND DIAMETER Unit: mm
L+α max
d
φ
15 min
4 min
φD+β
0.5
±
P
MARKING
φ
D = 6.3
Negative
polarity
a1
10
16V
Date code
Rated cap.
Rated voltage
φ
D = 8 ~ 10
Negative
polarity
a1
OCR
470
6.3V
Marking color: Blue
0.5
2011 Verison
Page 2
STANDARD RATINGS
W. V. (V)
2.5V (0E)
4V (0G)
6.3V (0J)
10V (1A)
16V (1C)
20V (1D)
25V (1E)
35V (1V)
50V (1H)
Capacitance
(µF)
220 6.3×5.5 0.12 110 28 2,390
390 6.3×11 0.12 195 18 3,160
680 8×11.5 0.18 340 10 5,230
1,000 10×10 0.18 500 14 4,700
1,500 10×12.5 0.18 750 8 5,500
150 6.3×5.5 0.12 120 40 1,810
270 6.3×11 0.12 216 15 3,200
560 8×11.5 0.18 448 10 5,230
1,200 10×12.5 0.18 960 8 5,500
100 6.3×5.5 0.12 126 40 1,810
220 6.3×11 0.12 277 18 3,160
330 6.3×6.5 0.12 416 28 2,390
390 8×11.5 0.15 491 12 4,770
470 8×11.5 0.15 592 12 4,770
820 10×12.5 0.15 1,033 10 5,500
100 6.3×6.5 0.12 200 45 1,700
220 10×10 0.15 440 17 3,950
330 8×11.5 0.12 660 14 4,420
560 10×12.5 0.12 1,360 12 5,300
47 6.3×5.5 0.10 150 50 1,650
100 6.3×11 0.10 320 22 2,820
180 8×11.5 0.12 576 16 4,360
330 10×10 0.12 1,056 16 4,360
330 10×12.5 0.12 1,056 14 5,050
22 6.3×5.5 0.10 88 60 1,450
56 6.3×11 0.10 224 25 2,650
100 8×11.5 0.15 400 24 3,320
100 10×10 0.15 400 24 3,320
150 10×12.5 0.15 600 20 4,320
6.8 6.3×5.5 0.10 170 80 1,200
33 8×11.5 0.12 165 24 3,320
56
68 8×11.5 0.12 340 24 3,320
100 10×12.5 0.12 500 20 4,320
22 8×11.5
39 8×11.5
47 10×12.5
68 10×12.5
27 8×11.5
47 10×12.5
Organic Conductive Polymer Capacitors
OCR
Dimension: φD×L(mm)
Ripple Current: mA/rms at 100k Hz, 105℃
Size
φD×L(mm)
8x11.5 0.12 280 24 3,320
10×12.5 0.12 280 20 4,320
Tanδ
(120Hz, 20 )℃
0.12 154 50 2,300
0.12 273 31 2,100
0.12 329 30 3,650
0.12 476 28 2,700
0.12 270 36 2,000
0.12 470 31 2,500
L C
(µA)
(mΩ/at 100k ~ 300k Hz, 20 Max)℃
E S R
(mA/rms at 100k Hz, 105 )℃
Rated R. C.
2011 Version
Loading...