Datasheet ntms4816n Datasheet

Download

Page 1

NTMS4816N

Power MOSFET

30 V, 11 A, N-Channel, SO-8

Features

•Low R

•Low Capacitance to Minimize Driver Losses

•Optimized Gate Charge to Minimize Switching Losses

•This is a Pb-Free Device

Applications

•Disk Drives

•DC-DC Converters

•Printers

MAXIMUM RATINGS (T

Drain-to-Source Voltage V

Gate-to-Source Voltage V

Continuous Drain Current R

Power Dissipation R (Note 1)

Continuous Drain Current R

Power Dissipation R (Note 2)

Continuous Drain Current R (Note 1)

Power Dissipation

, t v 10 s(Note 1)

Pulsed Drain Current

Operating Junction and Storage Temperature TJ,

Source Current (Body Diode) I

Single Pulse Drain-to-Source Avalanche Energy (T

= 25°C, VDD = 30 V, VGS = 10 V,

= 12.5 Apk, L = 1.0 mH, RG = 25 W)

Lead Temperature for Soldering Purposes (1/8″ from case for 10 s)

THERMAL RESISTANCE MAXIMUM RATINGS

Junction-to-Ambient – Steady State (Note 1)

Junction-to-Ambient – t v 10 s (Note 1)

Junction-to-Foot (Drain)

Junction-to-Ambient – Steady State (Note 2)

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

1. Surfacemounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces).

2. Surfacemounted on FR4 board using the minimum recommended pad size.

to Minimize Conduction Losses

DS(on)

= 25°C unless otherwise stated)

Parameter

Steady

(Note 1)

(Note 2)

, t v 10 s

Parameter Symbol Value Unit

State

Steady

State

Steady

State

Steady

State

Steady

State

TA = 25°C, tp = 10 ms

Symbol Value Unit

DSS

TA = 25°C

TA = 70°C 7.2

TA = 25°C P

TA = 25°C

TA = 70°C 5.4

TA = 25°C P

TA = 25°C

TA = 70°C 8.8

TA = 25°C P

stg

30 V

±20 V

9.0

1.37 W

6.8

0.78 W

2.04 W

33 A

-55 to 150

2.7 A

78 mJ

260 °C

91.5

61.3

22.5

159.5

°C

°C/W

http://onsemi.com

(BR)DSS

30 V

DS(ON)

10 mW @ 10 V

16 mW @ 4.5 V

N-Channel

MAX ID MAX

11 A

MARKING DIAGRAM/

PIN ASSIGNMENT

SO-8 CASE 751 STYLE 12

4816N = Device Code A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package

(Note: Microdot may be in either location)

Source Source Source

AYWWG

4816N

Gate

Top View

Drain Drain Drain Drain

ORDERING INFORMATION

Device Package Shipping

NTMS4816NR2G SO-8

(Pb-Free)

†For information on tape and reel specifications,

including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.

2500/Tape & Reel

†

© Semiconductor Components Industries, LLC, 2007

December, 2007 - Rev. 0

1 Publication Order Number:

NTMS4816N/D

Page 2

NTMS4816N

ELECTRICAL CHARACTERISTICS (T

Parameter

= 25°C unless otherwise specified)

Symbol Test Condition Min Typ Max Unit

OFF CHARACTERISTICS

Drain-to-Source Breakdown Voltage

Drain-to-Source Breakdown Voltage Temperature Coefficient

Zero Gate Voltage Drain Current I

Gate-to-Source Leakage Current I

(BR)DSS

(BR)DSS/TJ

DSS

GSS

VGS = 0 V, ID = 250 mA

VGS = 0 V, VDS = 24 V

VDS = 0 V, VGS = ±20 V ±100 nA

ON CHARACTERISTICS (Note 3)

Gate Threshold Voltage

Negative Threshold Temperature Coefficient

Drain-to-Source On Resistance R

GS(TH)

GS(TH)/TJ

DS(on)

VGS = VDS, ID = 250 mA

VGS = 10 V, ID = 9 A 8.2 10 mW

VGS = 4.5 V, ID = 7.2 A 12.7 16

Forward Transconductance g

VDS = 1.5 V, ID = 9 A 26 S

CHARGES, CAPACITANCES AND GATE RESISTANCE

Input Capacitance

Output Capacitance C

Reverse Transfer Capacitance C

Total Gate Charge Q

Threshold Gate Charge Q

Gate-to-Source Charge Q

Gate-to-Drain Charge Q

Total Gate Charge Q

iss

oss

rss

G(TOT)

G(TH)

G(TOT)

VGS = 0 V, f = 1.0 MHz, VDS = 25 V

VGS = 4.5 V, VDS = 15 V, ID = 9 A

VGS = 10 V, VDS = 15 V, ID = 9 A 18.3 nC

SWITCHING CHARACTERISTICS (Note 4)

Turn-On Delay Time

Rise Time t

Turn-Off Delay Time t

Fall Time t

d(on)

d(off)

VGS = 10 V, VDS = 15 V,

= 1.0 A, RG = 6.0 W

DRAIN-SOURCE DIODE CHARACTERISTICS

Forward Diode Voltage

Reverse Recovery Time t

Charge Time t

Discharge Time t

Reverse Recovery Charge Q

VGS = 0 V, IS = 2.7 A

VGS = 0 V, dIS/dt = 100 A/ms,

= 2.7 A

PACKAGE PARASITIC VALUES

Source Inductance

Drain Inductance L

Gate Inductance L

Gate Resistance R

TA = 25°C 0.66 nH

TA = 25°C 0.20 nH

TA = 25°C 1.5 nH

TA = 25°C 1.5 2.3

3. Pulse Test: pulse width = 300 ms, duty cycle v 2%.

4. Switching characteristics are independent of operating junction temperatures.

30 V

26 mV/°C

TJ = 25°C 1.0 mA

TJ = 100°C 10

1.5 3.0 V

6.0 mV/°C

1060

220

126

9.2

2.4

4.4

3.8

8.0

3.8

21.6

8.0

TJ = 25°C 0.75 1.0

TJ = 125°C 0.55

9.0

9.0 nC

http://onsemi.com

Page 3

NTMS4816N

TYPICAL PERFORMANCE CURVES

4.5 V

6 V

5 V

10V

TJ = 25°C

3.6 V

4.2 V

4 V

DRAIN CURRENT (AMPS)

0 0.5 1.0 1.5 2.0 2.5 3.0

3.8 V

2.8 V

, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

3.4 V

3.2 V

3.0 V

Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics

0.050

0.045

0.040

0.035

0.030

0.025

0.020

0.015

0.010

DRAIN-TO-SOURCE RESISTANCE (W)

0.005 246 810

DS(on),

VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)

TJ = 25°C I

= 9 A

VDS ≥ 10 V

TJ = 100°C

DRAIN CURRENT (AMPS)

TJ = 25°C

TJ = -55°C

12 34

VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)

0.02 TJ = 25°C

0.0175

0.015

0.0125

VGS = 4.5 V

0.01

0.0075

0.005

0.0025

DRAIN-TO-SOURCE RESISTANCE (W)

5101520

DS(on),

VGS = 10 V

DRAIN CURRENT (AMPS)

Figure 3. On-Resistance vs. Gate-to-Source

Voltage

1.6 ID = 9 A

1.5 V

= 10 V

1.4

1.3

1.2

1.1

1.0

DRAIN-TO-SOURCE

0.9

0.8

DS(on),

RESISTANCE (NORMALIZED)

0.7

0.6

-50 -25 0 25 50 75 100 125 150

TJ, JUNCTION TEMPERATURE (°C)

Figure 5. On-Resistance Variation with

Temperature

100000

10000

, LEAKAGE (nA)

1000

DSS

100

http://onsemi.com

Figure 4. On-Resistance vs. Drain Current and

Gate Voltage

VGS = 0 V

TJ = 150°C

TJ = 100°C

3 6 9 12151821242730

VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

Figure 6. Drain-to-Source Leakage Current

vs. Voltage

Page 4

NTMS4816N

TYPICAL PERFORMANCE CURVES

1500

1200

iss

900

600

oss

C, CAPACITANCE (pF)

300

rss

0510

15 25

DRAIN-TO-SOURCE VOLTAGE (VOLTS)

Figure 7. Capacitance Variation Figure 8. Gate-To-Source and

1000

VDD = 15 V I

= 1 A

= 10 V

100

t, TIME (ns)

1 10 100

RG, GATE RESISTANCE (OHMS)

TJ = 25°C

VGS = 0 V

d(off)

d(on)

, GATE-TO-SOURCE VOLTAGE (VOLTS)

QG, TOTAL GATE CHARGE (nC)

Drain-To-Source Voltage vs. Total Charge

4.5

VGS = 0 V

= 25°C

3.5

2.5

1.5

, SOURCE CURRENT (AMPS)

0.5

0.4 0.5 0.6 0.7

VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)

, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

4 ID = 9 A T

= 25°C

16 20

0.8

Figure 9. Resistive Switching Time

Variation vs. Gate Resistance

100

VGS = 20 V SINGLE PULSE TC = 25°C

0.1

, DRAIN CURRENT (AMPS)

0.01

0.1 10 100

LIMIT

DS(on)

THERMAL LIMIT PACKAGE LIMIT

VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

Figure 11. Maximum Rated Forward Biased

Safe Operating Area

10 ms

100 ms

1 ms

10 ms

AVALANCHE ENERGY (mJ)

EAS, SINGLE PULSE DRAIN-TO-SOURCE

http://onsemi.com

Figure 10. Diode Forward Voltage vs. Current

25 50 75 100

TJ, STARTING JUNCTION TEMPERATURE (°C)

Figure 12. Maximum Avalanche Energy vs.

Starting Junction Temperature

ID = 12.5 A

150125

Page 5

-Y-

-Z-

NTMS4816N

PACKAGE DIMENSIONS

SOIC-8

CASE 751-07

-X-

ISSUE AJ

0.25 (0.010)

SEATING PLANE

0.10 (0.004)

0.25 (0.010) Z

SXS

X 45

SOLDERING FOOTPRINT*

1.52

0.060

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION.

4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE.

5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION.

6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDARD IS 751-07.

MILLIMETERS

DIMAMIN MAX MIN MAX

4.80 5.00 0.189 0.197

B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8

____

N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244

STYLE 12:

PIN 1. SOURCE

2. SOURCE

3. SOURCE

4. GATE

5. DRAIN

6. DRAIN

7. DRAIN

8. DRAIN

INCHES

7.0

0.275

0.6

0.024

4.0

0.155

1.270

0.050

SCALE 6:1

inches

*For additional information on our Pb-Free strategy and soldering

details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected]

N. American Technical Support: 800-282-9855 Toll Free USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81-3-5773-3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local Sales Representative

NTMS4816N/D