Datasheet ntljf3117p-d Datasheet

NTLJF3117P

Power MOSFET and Schottky Diode

-20 V, -4.1 A, P-Channel, with 2.0 A Schottky Barrier Diode, 2x2 mm, mCool] Package

Features

•FETKYt Configuration with MOSFET plus Low Vf Schottky Diode

•mCOOLt Package Provides Exposed Drain Pad for Excellent

Thermal Conduction

•2x2 mm Footprint Same as SC-88 Package Design

•Independent Pinout Provides Circuit Design Flexibility

•Low Profile (< 0.8 mm) for Easy Fit in Thin Environment

•High Current Schottky Diode: 2 A Current Rating

•This is a Pb-Free Device

Applications

•Optimized for Portable Applications like Cell Phones, Digital

Cameras, Media Players, etc.

•DC-DC Buck Circuit

•Li-Ion Battery Applications

•Color Display and Camera Flash Regulators

MAXIMUM RATINGS (T

Parameter

Drain-to-Source Voltage V

Gate-to-Source Voltage V

Continuous Drain Current (Note 1)

Power Dissipation (Note 1)

Continuous Drain Current (Note 2)

Power Dissipation (Note 2)

Pulsed Drain Current

Operating Junction and Storage Temperature TJ, T

Source Current (Body Diode) (Note 2) I

Lead Temperature for Soldering Purposes (1/8″ from case for 10 s)

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

1. Surface Mounted on FR4 Board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces).

2. Surface Mounted on FR4 Board using the minimum recommended pad size of 30 mm

2

, 2 oz Cu.

= 25°C unless otherwise noted)

J

Symbol Value Unit

DSS

GS

I

P

I

P

DM

T

D

STG

S

L

T

= 25°C

Steady

State

t ≤ 5 s T

Steady

State

t ≤ 5 s 2.3

Steady

State

A

T

= 85°C -2.4

A

= 25°C -4.1

A

T

= 25°C

A

T

= 25°C

A

T

= 85°C -1.6

A

T

= 25°C

A

t

= 10 ms

p

-20 V

±8.0 V

-3.3

-2.3

0.71 W

-20 A

-55 to 150

-1.9 A

260 °C

1.5

A

W

A

°C

http://onsemi.com

MOSFET

(BR)DSS

-20 V

R

MAX

DS(on)

100 mW @ -4.5 V

135 mW @ -2.5 V

200 mW @ -1.8 V

I

MAX (Note 1)V

D

-4.1 A

SCHOTTKY DIODE

VR MAX IF MAXVF TYP

30 V

G

P-CHANNEL MOSFET

0.47 V

D

S

SCHOTTKY DIODE

2.0 A

A

K

MARKING DIAGRAM

1

WDFN6

CASE 506AN

JH = Specific Device Code M = Date Code G = Pb-Free Package (Note: Microdot may be in either location)

1 2 3

JHMG

G

6 5 4

PIN CONNECTIONS

K

D

K

6

G

5

4

S

N/C

A

1

2

D

3

(Top View)

ORDERING INFORMATION

See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.

© Semiconductor Components Industries, LLC, 2006

July, 2006 - Rev. 2

1 Publication Order Number:

NTLJF3117P/D

NTLJF3117P

SCHOTTKY DIODE MAXIMUM RATINGS (T

Parameter

Peak Repetitive Reverse Voltage V

DC Blocking Voltage V

Average Rectified Forward Current I

= 25°C unless otherwise noted)

J

Symbol Value Unit

RRM

R

F

THERMAL RESISTANCE RATINGS

Parameter Symbol Max Unit

Junction-to-Ambient – Steady State (Note 3)

Junction-to-Ambient – t ≤ 5 s (Note 3)

Junction-to-Ambient – Steady State Min Pad (Note 4)

3. Surface Mounted on FR4 Board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces).

4. Surface Mounted on FR4 Board using the minimum recommended pad size of 30 mm

MOSFET ELECTRICAL CHARACTERISTICS (T

Parameter

Symbol Test Conditions Min Typ Max Unit

= 25°C unless otherwise noted)

J

OFF CHARACTERISTICS

Drain-to-Source Breakdown Voltage

Drain-to-Source Breakdown Voltage Temperature Coefficient

Zero Gate Voltage Drain Current I

Gate-to-Source Leakage Current I

V

(BR)DSS

V

(BR)DSS/TJ

DSS

GSS

V

DS

V

GS

I

= -250 mA, Ref to 25°C

D

= -16 V, V

V

= 0 V, V

DS

= 0 V, I

GS

= -250 mA

D

= 0 V

GS

TJ = 25°C -1.0 mA

TJ = 85°C -10

= ±8.0 V ±100 nA

ON CHARACTERISTICS (Note 5)

Gate Threshold Voltage

Negative Threshold Temperature Coefficient

Drain-to-Source On-Resistance R

Forward Transconductance g

V

GS(TH)

V

GS(TH)/TJ

DS(on)

FS

V

GS

V

GS

V

GS

V

GS

V

DS

= VDS, I

= -4.5, I

= -2.5, I

= -1.8, I

= -5.0 V, I

= -250 mA

D

= -2.0 A 75 100 mW

D

= -2.0 A 101 135

D

= -1.6 A 150 200

D

= -2.0 A 3.1 S

D

CHARGES, CAPACITANCES AND GATE RESISTANCE

Input Capacitance

Output Capacitance C

Reverse Transfer Capacitance C

Total Gate Charge Q

Threshold Gate Charge Q

Gate-to-Source Charge Q

Gate-to-Drain Charge Q

Gate Resistance R

C

ISS

OSS

RSS

G(TOT)

G(TH)

GS

GD

G

V

= 0 V, f = 1.0 MHz,

GS

V

DS

V

= -4.5 V, V

GS

I

D

= -10 V

DS

= -2.0 A

= -10 V,

SWITCHING CHARACTERISTICS (Note 6)

Turn-On Delay Time

Rise Time t

Turn-Off Delay Time t

Fall Time t

t

d(ON)

r

d(OFF)

f

V

GS

I

D

= -4.5 V, V

= -1.0 A, R

= -5.0 V,

DD

= 6.0 W

G

5. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%.

6. Switching characteristics are independent of operating junction temperatures.

2

, 2 oz Cu.

R

q

JA

R

q

JA

R

q

JA

-20 V

-0.4 -0.7 -1.0 V

30 V

2.0 A

83

54

°C/W

177

9.95 mV/°C

2.44 mV/°C

531

pF

91

56

5.5 6.2

nC

0.7

1.0

1.4

8.8

5.2

W

ns

13.2

13.7

19.1

http://onsemi.com

2

NTLJF3117P

MOSFET ELECTRICAL CHARACTERISTICS (T

= 25°C unless otherwise noted)

J

Parameter UnitMaxTypMinTest ConditionsSymbol

SWITCHING CHARACTERISTICS (Note 6)

Turn-On Delay Time

Rise Time t

Turn-Off Delay Time t

Fall Time t

t

d(ON)

r

d(OFF)

f

V

GS

I

D

= -4.5 V, V = -2.0 A, R

= -10 V,

DD

= 2.0 W

G

DRAIN-SOURCE DIODE CHARACTERISTICS

Forward Recovery Voltage

Reverse Recovery Time t

Charge Time t

Discharge Time t

Reverse Recovery Time Q

V

SD

RR

a

b

RR

VGS = 0 V, IS = -1.0 A

V

= 0 V, d

GS

ISD/dt

I

= -1.0 A

S

TJ = 25°C -0.75 -1.0

TJ = 125°C -0.64

= 100 A/ms,

5. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%.

6. Switching characteristics are independent of operating junction temperatures.

SCHOTTKY DIODE ELECTRICAL CHARACTERISTICS (T

Parameter

Maximum Instantaneous Forward Voltage

Maximum Instantaneous Reverse Current

Symbol Test Conditions Min Typ Max Unit

V

F

I

R

SCHOTTKY DIODE ELECTRICAL CHARACTERISTICS (T

= 25°C unless otherwise noted)

J

I

= 0.1 A 0.34 0.39

F

I

= 1.0 A 0.47 0.53

F

V

= 30 V 17 20

R

V

= 20 V 3.0 8.0

R

V

= 10 V 2.0 4.5

R

= 85°C unless otherwise noted)

J

Parameter Symbol Test Conditions Min Typ Max Unit

I

Maximum Instantaneous Forward Voltage

Maximum Instantaneous Reverse Current

V

F

I

R

SCHOTTKY DIODE ELECTRICAL CHARACTERISTICS (T

Parameter

Maximum Instantaneous Forward Voltage

Maximum Instantaneous Reverse Current

Symbol Test Conditions Min Typ Max Unit

V

F

I

R

SCHOTTKY DIODE ELECTRICAL CHARACTERISTICS (T

= 0.1 A 0.22 0.35

F

I

= 1.0 A 0.40 0.50

F

V

= 30 V 0.22 2.5

R

V

= 20 V 0.11 1.6

R

V

= 10 V 0.06 1.2

R

= 125°C unless otherwise noted)

J

I

= 0.1 A 0.2 0.29

F

I

= 1.0 A 0.4 0.47

F

V

= 30 V 2.0 20

R

V

= 20 V 1.1 10.9

R

V

= 10 V 0.63 8.4

R

= 25°C unless otherwise noted)

J

Parameter Symbol Test Conditions Min Typ Max Unit

Capacitance C V

7. Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces).

8. Surface-mounted on FR4 board using the minimum recommended pad size of 30 mm

= 5.0 V, f = 1.0 MHz 38 pF

R

2

, 2 oz cu.

9. Pulse Test: pulse width v 300 ms, duty cycle v2%.

10.Switching characteristics are independent of operating junction temperatures.

5.5

15

19.8

21.6

16.2

10.6

5.6

5.7 nC

ns

V

ns

V

mA

V

mA

V

mA

http://onsemi.com

3

NTLJF3117P

TYPICAL PERFORMANCE CURVES (T

5

4.5

4

3.5

3

2.5

2

1.5

, DRAIN CURRENT (AMPS)

1

D

-I

0.5

0

0 4.521

-V

, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

DS

Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics

0.1

VGS = -4.5 V

0.09

0.08

0.07

VGS = -1.9 V to -6 V

3

2.51.50.5

TJ = 100°C

TJ = 25°C

3.5

-1.8 V

-1.7 V

-1.6 V

-1.5 V

-1.4 V

-1.3 V

-1.2 V

4

= 25°C unless otherwise noted)

J

5

VDS ≥ 10 V

4

3

2

TJ = 25°C

, DRAIN CURRENT (AMPS)

1

D

-I TJ = 125°C

0

-V

GS

1

, GATE-TO-SOURCE VOLTAGE (VOLTS)

0.15 TJ = 25°C

0.1

TJ = -55°C

1.5

VGS = -2.5 V

VGS = -4.5 V

20.5

2.5

3

0.06

0.05

, DRAIN-TO-SOURCE RESISTANCE (W)

0.04

DS(on)

1.0 2.01.5

R

TJ = -55°C

-ID, DRAIN CURRENT (AMPS)

Figure 3. On-Resistance versus Drain Current

1.6 ID = -2.2 A

V

= -4.5 V

GS

1.4

1.2

1.0

(NORMALIZED)

0.8

, DRAIN-TO-SOURCE RESISTANCE

0.6

DS(on)

-50 50250-25 75 125100

R

TJ, JUNCTION TEMPERATURE (°C)

Figure 5. On-Resistance Variation with

Temperature

0.05

, DRAIN-TO-SOURCE RESISTANCE (W)

2.5 3

12

R

0

DS(on)

-ID, DRAIN CURRENT (AMPS)

Figure 4. On-Resistance versus Drain Current

and Gate Voltage

10000

1000

, LEAKAGE (nA)

DSS

-I

150

100

10

VGS = 0 V

TJ = 150°C

TJ = 100°C

212104

6 8 14 16 18

-VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

Figure 6. Drain-to-Source Leakage Current

versus Voltage

4

5

20

http://onsemi.com

4

NTLJF3117P

TYPICAL PERFORMANCE CURVES (T

1200

VDS = 0 V

1000

C

iss

800

600

400

C

rss

C, CAPACITANCE (pF)

200

0

5 5 15 20

GATE-TO-SOURCE OR DRAIN-TO-SOURCE VOLTAGE (VOLTS)

1000

VDD = -15 V I

= -2.2 A

D

V

GS

100

VGS = 0 V

C

oss

010

V

GS

V

DS

Figure 7. Capacitance Variation

= -4.5 V

TJ = 25°C

= 25°C unless otherwise noted)

J

5

QT

4

, GATE-TO-SOURCE VOLTAGE (VOLTS)

-V

GS

3

V

DS

Q

GS

2

Q

GD

1

0

V

GS

43

ID = -2.2 A T

QG, TOTAL GATE CHARGE (nC)

Figure 8. Gate-To-Source and Drain-To-Source

Voltage versus Total Charge

3

VGS = 0 V

2.5

2

= 25°C

J

5

-V

20

DS

, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

16

12

8

4

0

621

t

f

t

t, TIME (ns)

10

t

d(off)

t

d(on)

r

1

1 10 100

RG, GATE RESISTANCE (OHMS)

Figure 9. Resistive Switching Time

Variation versus Gate Resistance

100

TC = 25°C T

= 150°C

J

SINGLE PULSE

10

1

*See Note 2 on Page 1

0.1

, DRAIN CURRENT (AMPS)

D

-I

0.01

0.1 1 100

-V

, DRAIN-TO-SOURCE VOLTAGE (VOLTS)

DS

Figure 11. Maximum Rated Forward Biased

, SOURCE CURRENT (AMPS)

s

-I

R

LIMIT

DS(on)

THERMAL LIMIT PACKAGE LIMIT

Safe Operating Area

1.5

1

0.5 TJ = 150°C

TJ = 25°C

0

0.1 0.7 0.90.50.3

-V

, SOURCE-TO-DRAIN VOLTAGE (VOLTS)

SD

0.6

0.80.40.2

Figure 10. Diode Forward Voltage versus Current

10 ms

100 ms

1 ms

10 ms

dc

10

1.0

http://onsemi.com

5

NTLJF3117P

1000

r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE

100

10

0.1

1

D = 0.5

0.2

0.1

0.05

0.02

0.01

TYPICAL PERFORMANCE CURVES (T

SINGLE PULSE

t, TIME (s)

Figure 12. Thermal Response

= 25°C unless otherwise noted)

J

P

(pk)

t

1

t

2

DUTY CYCLE, D = t1/t

*See Note 2 on Page 1

R

(t) = r(t) R

q

JA

q

JA

D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t T

J(pk)

2

10.010.00001

- TA = P

(pk)

1

R

q

JA

100 1000100.10.0010.00010.000001

(t)

http://onsemi.com

6

NTLJF3117P

)

TYPICAL SCHOTTKY PERFORMANCE CURVES (T

10

1.0

0.1

, INSTANTANEOUS FORWARD CURRENT (AMPS

F

I

TJ = 85°C

TJ = 125°C

TJ = 25°C

TJ = -55°C

0.1 0.2 0.4

VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)

0.6 0.8

10

1.0

0.1

, INSTANTANEOUS FORWARD CURRENT (AMPS)

0.90.70.3 0.5

F

I

= 25°C unless otherwise noted)

J

TJ = 85°C

TJ = 125°C

VF, MAXIMUM FORWARD VOLTAGE (VOLTS)

TJ = 25°C

0.6 0.80.1 0.2 0.4

0.90.70.3 0.5

Figure 13. Typical Forward Voltage Figure 14. Maximum Forward Voltage

1.0E+0

100E-3

10E-3

1.0E-3

100E-6

10E-6

, REVERSE CURRENT (AMPS)

R

I

1.0E-6

100E-9

0

VR, REVERSE VOLTAGE (VOLTS)

TJ = 125°C

TJ = 85°C

TJ = 25°C

10 20

30

1.0E+0

100E-3

10E-3

1.0E-3

100E-6

10E-6

1.0E-6

R

I , MAXIMUM REVERSE CURRENT (AMPS)

100E-9

TJ = 125°C

TJ = 85°C

TJ = 25°C

0

10 20 30

, REVERSE VOLTAGE (VOLTS)

V

R

Figure 15. Typical Reverse Current Figure 16. Maximum Reverse Current

ORDERING INFORMATION

Device Package Shipping

NTLJF3117PT1G WDFN6

(Pb-Free)

NTLJF3117PTAG WDFN6

(Pb-Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

3000 / Tape & Reel

†

http://onsemi.com

7

NTLJF3117P

PACKAGE DIMENSIONS

WDFN6 2x2

CASE 506AN-01

ISSUE C

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN

0.15 AND 0.20mm FROM TERMINAL.

4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS.

MILLIMETERS

DIMAMIN MAX

0.70 0.80

A1 0.00 0.05 A3 0.20 REF

b 0.25 0.35 D 2.00 BSC

D2 0.57 0.77

2.00 BSC

E

E2

0.90 1.10

e

0.65 BSC

0.25 REF

K L

0.20 0.30

J

0.15 REF

2X

PIN ONE

REFERENCE

0.10 C

D

A

B

E

A3

A

6X

0.08 C

6X

D2

L

1

A1

SEATING

C

D2

4X

3

e

PLANE

6X

0.43

SOLDERMASK DEFINED

MOUNTING FOOTPRINT

2.30

6X

0.35

1

E2

2X

0.65

PITCH

6X

K

6

J6X

BOTTOM VIEW

4

b

6X

A0.10 C

B

0.05 C

NOTE 3

0.250.25

2X

0.72

1.05

DIMENSIONS: MILLIMETERS

FETKY is a registered trademark of International Rectifier Corporation. mCool is a trademark of Semiconductor Components Industries, LLC (SCILLC).

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected]

N. American Technical Support: 800-282-9855 Toll Free USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81-3-5773-3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local Sales Representative

NTLJF3117P/D

8