Datasheet ntd5413n Datasheet

Download

Page 1

NTD5413N

Power MOSFET

30 Amps, 60 Volts Single N−Channel DPAK

Features

• Low R

• High Current Capability

• Avalanche Energy Specified

• These are Pb−Free Devices

Applications

• LED Lighting and LED Backlight Drivers

• DC−DC Converters

• DC Motor Drivers

• Switch Mode Power Supplies

• Power Supplies Secondary Side Synchronous Rectification

DS(on)

http://onsemi.com

(BR)DSS

60 V 30 A

MAX

DS(ON)

26 mW @ 10 V

N−Channel

MAX

(Note 1)

MAXIMUM RATINGS (T

Parameter

Drain−to−Source Voltage V

Gate−to−Source Voltage − Continuous V

Gate−to−Source Voltage − Nonrepetitive

< 10 ms)

Continuous Drain Current R (Note 1)

Power Dissipation R

Pulsed Drain Current

Operating and Storage Temperature Range TJ, T

Source Current (Body Diode) I

Single Pulse Drain−to−Source Avalanche Energy − Starting T (V L = 0.3 mH, R

Lead Temperature for Soldering Purposes, 1/8″ from Case for 10 Seconds

(Note 1)

= 50 Vdc, V

= 25 W)

= 25°C Unless otherwise specified)

Steady

State

Steady

State

= 25°C

= 10 V, I

TC = 25°C

TC = 100°C 23

TC = 25°C P

tp = 10 ms

= 30 A,

L(pk)

Symbol Value Unit

stg

60 V

$20 V

$30 V

68 W

84 A

−55 to +175

30 A

135 mJ

260 °C

°C

DSS

THERMAL RESISTANCE RATINGS

Parameter Symbol Max Unit

Junction−to−Case (Drain) Steady State (Note 1)

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

1. Surface mounted on FR4 board using 1 sq in pad size, (Cu Area 1.127 sq in [1 oz] including traces).

58.5

2.2

°C/W

MARKING DIAGRAM

Drain

DPAK

CASE 369AA

STYLE 2

Gate

5413N = Device Code Y = Year WW = Work Week G = Pb−Free Device

YWW

Drain

5413N

3 Source

ORDERING INFORMATION

See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

October, 2008 − Rev. 0

1 Publication Order Number:

NTD5413N/D

Page 2

NTD5413N

ELECTRICAL CHARACTERISTICS (T

Characteristics

= 25°C Unless otherwise specified)

Symbol Test Condition Min Typ Max Unit

OFF CHARACTERISTICS

Drain−to−Source Breakdown Voltage

Drain−to−Source Breakdown Voltage Temperature Coefficient

Zero Gate Voltage Drain Current I

Gate−Body Leakage Current I

(BR)DSS

(BR)DSS/TJ

DSS

GSS

VDS = 0 V, ID = 250 mA

VGS = 0 V

= 60 V

VDS = 0 V, VGS = $20 V $100 nA

ON CHARACTERISTICS (Note 2)

Gate Threshold Voltage

Negative Threshold Temperature Coefficient V

Drain−to−Source On−Voltage V

GS(th)

GS(th)/TJ

DS(on)

VGS = VDS, ID = 250 mA

VGS = 10 V, ID = 20 A 0.37 0.52

VGS = 10 V, ID = 20 A, 150°C 0.86

Drain−to−Source On−Resistance R

Forward Transconductance g

DS(on)

VGS = 10 V, ID = 20 A 18.5 26

VDS = 15 V, ID = 20 A 36 S

CHARGES, CAPACITANCES & GATE RESISTANCE

Input Capacitance

Output Capacitance C

Transfer Capacitance C

Total Gate Charge Q

Threshold Gate Charge Q

Gate−to−Source Charge Q

Gate−to−Drain Charge Q

iss

oss

rss

G(TOT)

G(TH)

VDS = 25 V, VGS = 0 V,

f = 1 MHz

VGS = 10 V, VDS = 48 V,

= 20 A

SWITCHING CHARACTERISTICS, VGS = 10 V (Note 3)

Turn−On Delay Time

Rise Time t

Turn−Off Delay Time t

Fall Time t

d(on)

d(off)

VGS = 10 V, VDD = 48 V,

= 20 A, RG = 2.5 W

DRAIN−SOURCE DIODE CHARACTERISTICS

Forward Diode Voltage (Note 2)

Reverse Recovery Time t

Charge Time t

Discharge Time t

Reverse Recovery Stored Charge Q

VGS = 0 V

= 20 A

IS = 20 Adc, VGS = 0 Vdc,

/dt = 100 A/ms

2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%.

3. Switching characteristics are independent of operating junction temperatures.

60 V

67.5 mV/°C

TJ = 25°C 1.0 mA

TJ = 150°C 50

2.0 3.4 4.0 V

7.9 mV/°C

1160 1725

240

100

35 46

1.4

6.5

16.1

8.0

TJ = 25°C 0.87 1.2

TJ = 125°C 0.8

105.7 nC

ORDERING INFORMATION

Device Package Shipping

NTD5413NT4G DPAK

2500 / Tape & Reel

(Pb−Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

†

http://onsemi.com

Page 3

NTD5413N

TYPICAL PERFORMANCE CURVES

10 V

7 V

TJ = 25°C

6 V

, DRAIN CURRENT (A)

5 V

VGS = 4.8 V

012345

, DRAIN−TO−SOURCE VOLTAGE (V)

Figure 1. On−Region Characteristics

0.050

0.045

0.040

0.035

0.030

0.025

0.020

0.015

0.010

, DRAIN−TO−SOURCE RESISTANCE (W)

0.005

567 8 910

DS(on)

, GATE−TO−SOURCE VOLTAGE (V)

ID = 20 A

= 25°C

Figure 3. On−Resistance vs. Gate−to−Source

Voltage

VDS ≥ 10 V

TJ = 125°C

, DRAIN CURRENT (A)

TJ = 25°C

TJ = −55°C

345 678

, GATE−TO−SOURCE VOLTAGE (V)

Figure 2. Transfer Characteristics

0.028

0.026

0.024

0.022

0.020

0.018

0.016

0.014

0.012

, DRAIN−TO−SOURCE RESISTANCE (W)

0.010

DS(on)

TJ = 25°C

VGS = 10 V

10 20 30 40 50 60

, DRAIN CURRENT (A)

Figure 4. On−Resistance vs. Drain Current and

Gate Voltage

2.4 ID = 20 A

2.2 V

= 10 V

1.8

1.6

1.4

1.2

(NORMALIZED)

, DRAIN−TO−SOURCE RESISTANCE

0.8

0.6

DS(on)

−50 −25 0 25 50 75 100 125 150 175

, JUNCTION TEMPERATURE (°C)

Figure 5. On−Resistance Variation with

Temperature

1000

100

, LEAKAGE (nA)

DSS

http://onsemi.com

VGS = 0 V

TJ = 150°C

TJ = 125°C

51015202530354045505560

, DRAIN−TO−SOURCE VOLTAGE (VOLTS)

Figure 6. Drain−to−Source Leakage Current

vs. Voltage

Page 4

NTD5413N

TYPICAL PERFORMANCE CURVES

2500

VGS = 0 V

2000

TJ = 25°C

1500

iss

1000

C, CAPACITANCE (pF)

500

rss

oss

0 102030405060

, DRAIN−TO−SOURCE VOLTAGE (V)

Figure 7. Capacitance Variation

1000

100

t, TIME (ns)

= 20 A

= 48 V

= 10 V

d(off)

d(on)

, GATE−TO−SOURCE VOLTAGE (V)

0 5 10 15 20 25 30 40

, TOTAL GATE CHARGE (nC)

Figure 8. Gate−to−Source Voltage vs. Total

Charge

VGS = 0 V

= 25°C

, SOURCE CURRENT (A)

ID = 20 A T

= 25°C

1 10 100

RG, GATE RESISTANCE (W)

Figure 9. Resistive Switching Time Variation

vs. Gate Resistance

1000

0 V ≤ VGS ≤ 10 V Single Pulse TC = 25°C

100

, DRAIN CURRENT (A)

DS(on)

1 ms

10 ms

Limit

100 ms

Thermal Limit

0.1

0.1 10 100

Package Limit

VDS, DRAIN−TO−SOURCE VOLTAGE (V)

Figure 11. Maximum Rated Forward Biased

Safe Operating Area

10 ms

0.4 0.5 0.6 0.7 0.8 0.9 1.0

, SOURCE−TO−DRAIN VOLTAGE (V)

Figure 10. Diode Forward Voltage vs. Current

140

ID = 30 A

120

100

AVALANCHE ENERGY (mJ)

25 50 75 100 125 150 175

, STARTING JUNCTION TEMPERATURE (°C)

Figure 12. Maximum Avalanche Energy vs.

Starting Junction Temperature

http://onsemi.com

Page 5

NTD5413N

TYPICAL PERFORMANCE CURVES

100

D = 0.5

0.2

0.1

0.05

0.02

0.01

0.1

r(t), (°C/W)

0.01

0.001

Single Pulse

Surface−Mounted on FR4 Board using 1 sq in pad size, 1 oz Cu

0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000

t, PULSE TIME (s)

Figure 13. Thermal Response

http://onsemi.com

Page 6

NTD5413N

PACKAGE DIMENSIONS

DPAK

CASE 369AA−01

ISSUE A

NOTES:

SEATING

−T−

PLANE

123

2 PL

0.13 (0.005) T

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

DIM MIN MAX MIN MAX

A 0.235 0.245 5.97 6.22 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.025 0.035 0.63 0.89 E 0.018 0.024 0.46 0.61 F 0.030 0.045 0.77 1.14 H 0.386 0.410 9.80 10.40 J 0.018 0.023 0.46 0.58 L 0.090 BSC 2.29 BSC R 0.180 0.215 4.57 5.45 S 0.024 0.040 0.60 1.01 U 0.020 −−− 0.51 −−− V 0.035 0.050 0.89 1.27 Z 0.155 −−− 3.93 −−−

STYLE 2:

PIN 1. GATE

2. DRAIN

3. SOURCE

4. DRAIN

MILLIMETERSINCHES

SOLDERING FOOTPRINT*

6.20

0.244

5.80

0.228

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

2.58

0.101

3.0

0.118

0.063

1.6

SCALE 3:1

6.172

0.243

inches

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected]

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local Sales Representative

NTD5413N/D