Page 1
NC7WP00
NC7WP00 TinyLogic
March 2003
Revised January 2005
TinyLogic
ULP Dual 2-Input NAND Gate
General Description
The NC7WP00 is a dual 2-input NAND Gate from
Fairchild’s Ultra Low Power (ULP) Series of TinyLogic
Ideal for applications where battery life is critical, this product is designed for ultra low power con sumption w ithin t he
V
operating range of 0.9V to 3.6V.
CC
The internal circ uit is composed o f a minimum of inverter
stages including the output buffer, to enable ultra low static
and dynamic power.
The NC7WP00 is designed for optimized power and
speed, and is fabricat ed with an advan ced CM OS techn ology to achieve high speed operation while maintaining
extremely low CMOS power dissipation.
Features
■ Space saving US8 package
.
■ Ultra small MicroPak
■ 0.9V to 3.6V V
■ 3.6V overvoltage tolerant I/O’s at V
■ t
PD
3 ns typ for 3.0V to 3.6V V
4 ns typ for 2.3V to 2.7V V
5 ns typ for 1.65V to 1.95V V
6 ns typ for 1.40V to 1.60V V
9 ns typ for 1.10V to 1.30V V
24 ns typ for 0.90V V
■ Power-Off high impedance inputs and outputs
■ Static Drive (I
±2.6 mA @ 3.00V V
±2.1 mA @ 2.30V V
±1.5 mA @ 1.65V V
±1.0 mA @ 1.40V V
±0.5 mA @ 1.10V V
±20 µA@ 0.9V V
■ Low noise switching using design techniques of
Quiet Series
■ Ultra low dynamic power
Pb-Free package
supply operation
CC
CC
CC
CC
CC
CC
CC
)
OH/IOL
CC
CC
CC
CC
CC
CC
noise/EMI reduction circuitry
from 0.9V to 3.6V
CC
ULP Dual 2-Input NAND Gate
Ordering Code:
Product
Order Number
Package Description Supplied AsPackage Code
Number Top Mark
NC7WP00K8X MAB08A WP00 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel
NC7WP00L8X MAC08A Y3 Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel
Pb-Free pac k age per JEDEC J-STD-020B.
Battery Life vs. VCC Supply Voltage
TinyLogic ULP and ULP -A with up to 50% les s power consumption can
extend your battery lif e significantly.
Battery Life = (V
Where, P
device
Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and
derated 90% and device frequency at 10MHz, with CL = 15 pF load
TinyLogic is a registered tradem ark of Fairchild Semiconductor Corpo ration.
MicroPak and Quiet Series are trade m arks of Fairchild Sem ic onductor Corporation.
© 2005 Fairchild Semiconductor Corporation DS500810 www.fairchildsemi.com
= (I
battery
*I
* VCC) + (C
CC
battery
*.9)/(P
PD
)/24hrs/day
device
+ CL) * V
2
* f
CC
Page 2
Logic Symbol
Connection Diagrams
NC7WP00
Pin Descriptions
Pin Names Description
A
Function Table
AB Y
LL H
LH H
HL H
HH L
H = HIGH Logic Level
L = LOW Logic Level
IEEE/IEC
, B
n
n
Y
n
Y = AB
Inputs Output
Inputs
Output
Pin Assignments f or US8
(Top View)
Pin One Orientation Diagram
AAA represents Product Code Top Mark - see ordering cod e
Note: Orientation of Top Mark determines Pin One location. Read the top
product code mark lef t to right, Pin One is the lo w er left pin (see diagram ).
Pad Assignments for MicroPak
www.fairchildsemi.com 2
(Top Thru View)
Page 3
Absolute Maximum Ratings(Note 1) Recommended Operating
Supply Voltage (VCC) −0.5V to +4.6V
DC Input Voltage (V
DC Output Voltage (V
HIGH or LOW State (Note 2)
V
= 0V −0.5V to 4.6V
CC
DC Input Diode Current (I
DC Output Diode Current (I
V
< 0V −50 mA
OUT
V
> V
OUT
CC
DC Output Source/Sink Current (I
DC V
or Ground Current per
CC
Supply Pin (I
Storage Temperature Range (T
) −0.5V to +4.6V
IN
)
OUT
) VIN < 0V ±50 mA
IK
)
OK
or Ground) ± 50 mA
CC
STG
−0.5V to V
) ± 50 mA
OH/IOL
CC
) −65°C to +150°C
+0.5V
+50 mA
Conditions
Supply Voltage 0.9V to 3.6V
Input Voltage (V
Output Voltage (V
HIGH or LOW State 0V to V
VCC = 0V 0V to 3.6V
Output Current in I
VCC = 3.0V to 3.6V ±2.6 mA
V
= 2.3V to 2.7V ±2.1 mA
CC
V
= 1.65V to 1.95V ±1.5 mA
CC
= 1.40V to 1.60V ±1.0 mA
V
CC
V
= 1.10V to 1.30V ±0.5 mA
CC
V
= 0.9V ±20 µA
CC
Free Air Operating Temperature (T
Minimum Input Edge Rate (
V
= 0.8V to 2.0V, VCC = 3.0V 10 ns/V
IN
Note 1: Absolute Maximum Ratings: are those values beyond which the
safety of the device can not be gu arant eed. The de vice sh ould no t be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The
“Recommended Operating Con ditions” table will define the conditions for
actual device opera tion.
Absolute Maximum Rating must be observed.
Note 2: I
O
Note 3: Unused inputs must be held HIGH or LOW. They may not float.
(Note 3)
) 0V to 3.6V
IN
)
OUT
OH/IOL
) −40°C to +85°C
A
∆t/∆V)
DC Electrical Characteristics
V
Symbol Parameter
V
HIGH Level 0.90 0.65 x V
IH
Input Voltage 1.10 ≤ VCC ≤ 1.30 0.65 x V
V
LOW Level 0.90 0.35 x V
IL
Input Voltage 1.10 ≤ V
V
HIGH Level 0.90 V
OH
Output Voltage 1.10 ≤ VCC ≤ 1.30 VCC − 0.1 VCC − 0.1
CC
(V) Min Max Min Max
1.40 ≤ VCC ≤ 1.60 0.65 x V
1.65 ≤ VCC ≤ 1.95 0.65 x V
2.30 ≤ VCC ≤ 2.70 1.6 1.6
≤ 3.60 2.1 2.1
3.00 ≤ V
CC
≤ 1.30 0.35 x V
CC
1.40 ≤ VCC ≤ 1.60 0.35 x V
1.65 ≤ VCC ≤ 1.95 0.35 x V
2.30 ≤ VCC ≤ 2.70 0.7 0.7
3.00 ≤ VCC ≤ 3.60 0.9 0.9
1.40 ≤ VCC ≤ 1.60 VCC − 0.1 VCC − 0.1
1.65 ≤ VCC ≤ 1.95 VCC − 0.1 VCC − 0.1
2.30 ≤ VCC ≤ 2.70 VCC − 0.1 VCC − 0.1
3.00 ≤ VCC ≤ 3.60 VCC − 0.1 VCC − 0.1
1.10 ≤ VCC ≤ 1.30 0.75 x V
1.40 ≤ VCC ≤ 1.60 1.07 0.99 IOH = −1.0 mA
1.65 ≤ VCC ≤ 1.95 1.24 1.22 IOH = −1.5 mA
2.30 ≤ VCC ≤ 2.70 1.95 1.87 IOH = −2.1 mA
3.00 ≤ VCC ≤ 3.60 2.61 2.55 IOH = −2.6 mA
TA = +25°CT
CC
CC
CC
CC
− 0.1 VCC − 0.1
CC
CC
0.65 x V
0.65 x V
0.65 x V
0.65 x V
CC
CC
CC
CC
0.70 x V
= −40°C to +85°C
A
CC
CC
CC
CC
0.35 x V
0.35 x V
0.35 x V
0.35 x V
CC
Units Conditions
V
CC
CC
CC
V
CC
V
NC7WP00
CC
IOH = −20 µA
IOH = −0.5 mA
3 www.fairchildsemi.com
Page 4
DC Electrical Characteristics (Continued)
V
Symbol Parameter
NC7WP00
V
LOW Level 0.90 0.1 0.1
OL
CC
(V) Min Max Min Max
Output Voltage 1.10 ≤ VCC ≤ 1.30 0.1 0.1
1.40 ≤ V
≤ 1.60 0.1 0.1
CC
1.65 ≤ VCC ≤ 1.95 0.1 0.1
≤ 2.70 0.1 0.1
2.30 ≤ V
CC
3.00 ≤ V
≤ 3.60 0.1 0.1
CC
1.10 ≤ VCC ≤ 1.30 0.30 x V
≤ 1.60 0.31 0.37 IOL = 1.0 mA
1.40 ≤ V
CC
1.65 ≤ V
≤ 1.95 0.31 0.35 IOL = 1.5 mA
CC
2.30 ≤ VCC ≤ 2.70 0.31 0.33 IOL = 2.1 mA
≤ 3.60 0.31 0.33 IOL = 2.6 mA
3.00 ≤ V
I
Input Leakage Current 0.90 to 3.60 ±0.1 ±0.5 µA0 ≤ VI ≤ 3.6V
IN
Power Off Leakage Current 0 0.5 0.5 µA0 ≤ (VI, VO) ≤ 3.6V
I
OFF
I
Quiescent Supply Current 0.90 to 3.60 0.9 0.9 µAVI = VCC or GND
CC
CC
AC Electrical Characteristics
V
Symbol Parameter
t
, Propagation Delay 0.90 24.0
THL
t
PLH
t
, Propagation Delay 0.90 27.0
PHL
t
PLH
t
Propagation Delay 0.90 34.0
PHL
t
PLH
C
Input Capacitance 0 2.0 pF
IN
C
Output Capacitance 0 4.0 pF
OUT
C
Power Dissipation
PD
Capacitance f = 10 MHz
CC
(V) Min Typ Max Min Max
1.10 ≤ VCC ≤ 1.30 4.0 9.0 19.0 3.5 31.0
≤ 1.60 2.0 6.0 12.0 1.5 14.0 CL = 10 pF
1.40 ≤ V
CC
1.65 ≤ VCC ≤ 1.95 1.5 5.0 10.0 1.0 12.0 RL = 1 MΩ
2.30 ≤ V
≤ 2.70 1.0 4.0 7.0 0.8 8.0
CC
≤ 3.60 1.0 3.0 6.0 0.5 7.0
3.00 ≤ V
CC
1.10 ≤ VCC ≤ 1.30 5.0 10.0 20.0 4.5 34.0
≤ 1.60 3.0 7.0 13.0 2.5 16.0 CL = 15 pF
1.40 ≤ V
CC
1.65 ≤ VCC ≤ 1.95 2.0 5.0 10.0 2.0 12.0 RL = 1 MΩ
2.30 ≤ V
≤ 2.70 1.5 4.0 7.0 1.0 8.0
CC
≤ 3.60 1.0 3.0 6.0 0.5 7.0
3.00 ≤ V
CC
1.10 ≤ VCC ≤ 1.30 6.0 12.0 24.0 5.0 43.0
≤ 1.60 4.0 8.0 16.0 3.0 18.0 CL = 30 pF
1.40 ≤ V
CC
1.65 ≤ VCC ≤ 1.95 2.0 6.0 12.0 2.0 14.0 RL = 1 MΩ
2.30 ≤ VCC ≤ 2.70 1.0 5.0 9.0 1.0 10.0
3.00 ≤ VCC ≤ 3.60 0.8 4.0 7.0 0.5 9.0
0.9 to 3.60 6.0 pF
TA = +25°CT
TA = +25°CT
A
CC
= −40°C to +85°C
A
= −40°C to +85°C
0.30 x V
CC
Units Conditions
ns
ns
ns
Units Conditions
= 20 µA
I
OL
V
IOL = 0.5 mA
Number
VI = 0V or VCC,
Figure
Figures
1, 2
Figures
1, 2
Figures
1, 2
www.fairchildsemi.com 4
Page 5
AC Loading and Waveforms
Symbol
V
mi
V
mo
3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.10V 1.2V ± 0.10V 0.9V
1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2
1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
V
CC
NC7WP00
5 www.fairchildsemi.com
Page 6
Tape and Reel Specification
TAPE FORMAT for US8
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
NC7WP00
K8X Carrier 3000 Filled Sealed
TAPE DIMENSIONS inches (millimeters)
TAPE FO RM AT for Mic ro Pak
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
L8X Carrier 3000 Filled Sealed
Leader (Start End) 125 (typ) Empty Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Leader (Start End) 125 (typ) Empty Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
TAPE DIMENSIONS inches (millimeters)
www.fairchildsemi.com 6
Page 7
Tape and Reel Specification (Continued)
REEL DIMENSIONS inches (millimeters)
NC7WP00
Tape
Size
8 mm
ABCDN W1 W2 W3
7.0 0.059 0.512 0.795 2.165 0.331
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40
+ 0.059/−0.000 0.567 W1 + 0.078/−0.039
+ 1.50/−0.00) (14.40) (W1 + 2.00/−1.00)
7 www.fairchildsemi.com
Page 8
Physical Dimensions inches (millimeters) unless otherwise noted
NC7WP00
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
www.fairchildsemi.com 8
Package Number MAB08A
Page 9
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
NC7WP00 TinyLogic
ULP Dual 2-Input NAND Gate
Pb-Free 8-Lead MicroPak, 1.6 mm Wide
Package Number MAC08A
Fairchild does not assume any responsibility for use of any circuitry described , no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provide d in the l abe ling, can be reasonably expected to result in a significant injury to the
user.
2. A critical compo nent in any com ponen t of a life s upp ort
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
9 www.fairchildsemi.com
Loading...