Page 1
Doc No.: 44085014
A
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: N156B6-L01
(With Converter)
Customer :
pproved by :
Note :
www.jxlcd.com
www.jxlcd.com
Version 1.0
18:51:37 CST
記錄 工作 審核 角色 投票
annie_hsu(徐凡
2008-08-01
PMMD III
Director
琇/56522 /
54873)
1 / 29
Director Accept
Page 2
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT FPC PIN ASSIGNMENT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
5.5 EDID DATA STRUCTURE
6. CONVERTER INPUT PIN ASSIGNMENT
6.1 CONVERTER INPUT PIN ASSIGNMENT
6.2 ABSOLUTE MAXIMUM RATINGS
6.3 RECOMMENDED OPERATING RATINGS
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
7.2 POWER ON/OFF SEQUENCE
8. OPTICAL CHARACTERISTICS
8.1 TEST CONDITIONS
8.2 OPTICAL SPECIFICATIONS
9. PRECAUTIONS
9.1 HANDLING PRECAUTIONS
9.2 STORAGE PRECAUTIONS
9.3 OPERATION PRECAUTIONS
10. PACKING ------------------------------------------------------- 25
10.1 CARTON
10.2 PALLET
11. DEFINITION OF LABELS
11.1 CMO MODULE LABEL
11.2 CARTON LABEL
www.jxlcd.com
www.jxlcd.com
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 10
------------------------------------------------------- 12
------------------------------------------------------- 17
------------------------------------------------------- 18
------------------------------------------------------- 20
------------------------------------------------------- 24
------------------------------------------------------- 27
2 / 29
Version 1.0
Page 3
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
Version Date
Ver 1.0 Jul.09, 2008
www.jxlcd.com
www.jxlcd.com
Page
(New)
All
REVISION HISTORY
Section Description
Preliminary specification first issued.
All
3 / 29
Version 1.0
Page 4
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N156B6-L01 is a 15.6” TFT Liquid Crystal Display module with LED Backlight unit and 30 pins LVDS
interface. This module supports 1366 x 768 Wide-XGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction.
1.2 FEATURES
- Thin and light weight
- WXGA (1366 x 768 pixels) re solution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
1.3 APPLICA TION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 344.232 (H) x 193.536 (V) (15.6” diagonal) mm
Bezel Opening Area 348.43 (H) x 197.74 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.252 (H) x 0.252 (V) mm Pixel Arrange ment RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treatment Hard coating (3H), Anti-Glare - -
1.5 MECHANICAL SPECIFICATIONS
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Note
Horizontal(H) 358.8 359.3 359.8 mm
Vertical(V) 209 209.5 210 mm
Thickness(T) - 5.9 6.2 mm
Weight --- 490 505 g -
(1)
(1)
4 / 29
Version 1.0
Page 5
Doc No.: 44085014
A
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 50 ºC max.
Relative Humidity (%RH)
100
90
- 200/2 G/ms (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Min. Max.
Value
Unit Note
80
60
40
www.jxlcd.com
www.jxlcd.com
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (200G / 2ms) is half Sine Wave,.
Note (4) 10~500 Hz, 0.5hr/cycle 1cycle for X,Y,Z
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
20
10
Operating Range
Storage Range
80 60 -20 400 20-40
Temperature (ºC)
t Room Temperature
Side Mount Fixing Screw
Gap=2mm
2.2 ELECTRICAL ABSOLUTE RATINGS
Version 1.0
Bracket
5 / 29
LCD Module
Side Mount Fixing Screw
Stage
Page 6
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +4.0 V
Logic Input Voltage VIN -0.3 Vcc+0.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
LED Light Bar Power Supply
Voltage
LED Light Bar Power Supply
Current
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Co nditions.
Min. Max.
V
0 TBD V
L
I
0 TBD mA
L
Value
Value
Min. Max.
Unit Note
(1)
Unit Note
(1), (2)
Note (2) Specified values are for LED (Refer to 3.2 for further information).
www.jxlcd.com
www.jxlcd.com
6 / 29
Version 1.0
Page 7
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply V oltage Vcc 3.0 3.3 3.6 V Ripple Voltage VRP - 50 mV Rush Current I
- - 1.5 A (2)
RUSH
Initial Stage Current IIS - - 1.0 A (2)
Power Supply Current
White 320 (360) mA (3)a
Black
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
-
-
TH(LVDS)
-100 - - mV
TL(LVDS)
390 (450) mA (3)b
- - +100 mV
LVDS Common Mode V oltage VCM 1.125 - 1.375 V (5)
LVDS Differential Input Voltage |VID| 100 - 600 mV (5)
Terminating Resistor RT - 100 - Ohm -
Power per EBL WG P
- TBD - W (4)
EBL
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Value
Unit Note
V
CM
V
CM
(5),
=1.2V
(5)
=1.2V
Note (2) I
Measurement Conditions: Shown as the following figure. Test pattern: black.
: the maximum current when VCC is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
+3.3V
R1
47K
VR1
R2
1K
47K
www.jxlcd.com
www.jxlcd.com
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
Q1 2SK1475
C2
0.01uF
Q2
2SK1470
FUSE
C3
1uF
Vcc rising time is 470us
+3.3V
VCC
Vcc
(LCD Module Input)
0V
470us
0.1Vcc
I
RUSH
100ms
I
IS
ICC
7 / 29
Version 1.0
Page 8
Doc No.: 44085014
|
|
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and f
Note (4) The specified power are the sum of LCD panel electronics input power and the converter input
a. White Pattern
power. Test conditions are as follows.
(a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
Active Area
= 60 Hz,
v
Active Area
(c) Luminance: 60 nits.
www.jxlcd.com
www.jxlcd.com
Note (5) The parameters of LVDS signals are defined as the following figures.
Single Ended
Differential
CM
V
0V
V
0V
V
VID|
VID|
8 / 29
Version 1.0
Page 9
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
LED Quantity 54 PCs (1)
LED Light Bar Power
Supply Volt age
LED Light Bar Power
Supply Current
Power Consumption PL 3.456 W (3), (Duty 100%)
LED Life Time LBL 15000 - - Hrs (4)
Note (1) LED light bar configuration is shown as below.
V
26.1 28.8 30.6 V
L
I
120 mA
L
Min. Typ. Max.
Value
Unit Note
(1),(2) (Duty 100%)
Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter with current
balancing function to drive LED light-bar.
Note (3) P
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2
and I
= 20 mA(Per EA) until the brightness becomes ≦ 50% of its original value.
L
= IL ×VL
L
Light Bar Feedback
Channels
www.jxlcd.com
www.jxlcd.com
V
L, IL
LED
Light Bar
Parallel:6
Series：9
o
C
9 / 29
Version 1.0
Page 10
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
LVDS Display
Data & Clock
LED driving
Signals
Vcc
GND
Data
CLK
V
EDID
EDID
EDID
LVDS INPUT /
TIMING CONTROLLER
INPUT CONNECTOR
LED
Converter
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
EDID
EEPROM
SCAN DRIVER IC
TFT LCD PANEL
DA TA DRIVER IC
BACKLIGHT UNIT
www.jxlcd.com
4.2 BACKLIGHT UNIT
www.jxlcd.com
10 / 29
Version 1.0
Page 11
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Symbol Description Polarity Remark
1 Vss Ground
2 Vcc Power Supply +3.3 V (typical)
3 Vcc Power Supply +3.3 V (typical)
4 V
5 NC Non-Connection
6 CLK
7 DATA
8 Rxin0- LVDS Differential Data Input Negative
9 Rxin0+ LVDS Differential Data Input Positive
10 Vss Ground
11 Rxin1- LVDS Differential Data Input Negative
12 Rxin1+ LVDS Differential Data Input Positive
13 Vss Ground
14 Rxin2- LVDS Differential Data Input Negative B2~B5, DE, Hsync, Vsync
15 Rxin2+ LVDS Differential Data Input Positive
16 Vss Ground
17 CLK- LVDS Clock Data Input Negative
18 CLK+ LVDS Clock Data Input Positive
19 Vss Ground
20 NC Non-Connection
21 NC Non-Connection
22 Vss Ground
23 NC Non-Connection
24 NC Non-Connection
25 Vss Ground
26 NC Non-Connection
27 NC Non-Connection
28 Vss Ground
29 NC Non-Connection
30 NC Non-Connection
Note (1) Connector Part No. JAE FI-XB30SL-HF10 OR EQUIVALENT
www.jxlcd.com
www.jxlcd.com
DDC 3.3V Power DDC 3.3V Power
EDID
DDC Cloc k DDC Clock
EDID
DDC Data DDC Data
EDID
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
R0~R5,G0
G1~G5, B0, B1
LVDS Level Clock
Note (2) User’s connector Part No: JAE-FI-X30M or equivalent
Note (3) The first pixel is odd as shown in the following figure.
11 / 29
Version 1.0
Page 12
5.2 TIMING DIAGRAM OF LVDS IN PUT SIGNAL
CLK+
T/7
Rxin2
Rxin1
Rxin0
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN6 IN5 IN4 IN3 IN2 IN1 IN0
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
G0 R3 R2 R1 R0
www.jxlcd.com
www.jxlcd.com
R5
R4
Signal for 1 DCLK Cycle (T)
12 / 29
Version 1.0
Page 13
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input the brighter the color. The table below provides the assignment of
color versus data input.
Data Signal
Color
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Volt age, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)
:
:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(61)
www.jxlcd.com
www.jxlcd.com
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)
:
:
Blue(61)
Blue(62)
Blue(63)
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
13 / 29
Version 1.0
Page 14
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
5.4 EDID DATA STRUCTURE
The EDID (Extended Display Identification Data) data formats are to support displays as defined in the
VESA Plug & Display and FPDI standards.
Byte
#(decimal)
0 0 Header
1 1 Header
2 2 Header
3 3 Header
4 4 Header
5 5 Header
6 6 Header
7 7 Header
8 8 EISA ID manufacturer name (“CMO”)
9 9 EISA ID manufacturer name (Compressed ASCII)
10 0A ID product code (N156B6-L01) 65
11 0B ID product code (hex LSB first; N156B6-L01) 15
12 0C ID S/N (fixed “0”)
13 0D ID S/N (fixed “0”)
14 0E ID S/N (fixed “0”)
15 0F ID S/N (fixed “0”)
16 10 Week of manufacture (fixed “00H”)
17 11 Year of manufacture (fixed “00H”)
18 12 EDID structure version # (“1”)
19 13 EDID revision # (“3”)
20 14 Video I/P definition (“digital”)
21 15 Max H image size (“35cm”)
22 16 Max V image size (“19cm”)
23 17 Display Gamma (Gamma = ”2.2”)
24 18 Feature support (“Active off, RGB Color”)
25 19 Red/Green (Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0)
26 1A Blue/White (Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0)
27 1B Red-x (Rx = “0.602”)
28 1C Red-y (Ry = “0.340”)
29 1D Green-x (Gx = ”0.306”)
30 1E Green-y (Gy = ”0.530”)
31 1F Blue-x (Bx = ”0.151”)
32 20 Blue-y (By = ”0.120”)
33 21 White-x (Wx = ”0.313”)
34 22 White-y (Wy = ”0.329”)
35 23 Established timings 1
36 24 Established timings 2
37 25 Manufacturer’s reserved timings
38 26 Standard timing ID # 1
39 27 Standard timing ID # 1
Byte
#(hex)Field Name and Comments Value(hex) Value(binary)
00 00000000
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
00 00000000
0D 00001101
AF 10101111
00 00000000
00 00000000
00 00000000
00 00000000
24 00100100
12 00010010
01 00000001
www.jxlcd.com
www.jxlcd.com
03 00000011
80 10000000
23 00100011
13 00010011
78 01111000
0A 00001010
07 00000111
F5 11110101
9A 10011010
57 01010111
4E 01001110
87 10000111
26 00100110
1E 00011110
50 01010000
54 01010100
00 00000000
00 00000000
00 00000000
01 00000001
01 00000001
01100101
00010101
14 / 29
Version 1.0
Page 15
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
40 28 Standard timing ID # 2
41 29 Standard timing ID # 2
42 2A Standard timing ID # 3
43 2B Standard timing ID # 3
44 2C Standard timing ID # 4
45 2D Standard timing ID # 4
46 2E Standard timing ID # 5
47 2F Standard timing ID # 5
48 30 Standard timing ID # 6
49 31 Standard timing ID # 6
50 32 Standard timing ID # 7
51 33 Standard timing ID # 7
52 34 Standard timing ID # 8
53 35 Standard timing ID # 8
Detailed timing description # 1 Pixel clock (“75.5MHz”, According to
54 36
55 37 # 1 Pixel clock (hex LSB first)
56 38 # 1 H active (“1366”)
57 39 # 1 H blank (“194”)
58 3A # 1 H active : H blank (“1366 :194”)
59 3B # 1 V active (”768”)
60 3C # 1 V blank (”38”)
61 3D # 1 V active : V blank (”768 :38”)
62 3E # 1 H sync offset (”31”)
63 3F # 1 H sync pulse width ("65”)
64 40 # 1 V sync offset : V sync pulse width (”4 : 12”)
65 41
66 42 # 1 H image size (”344 mm”)
67 43 # 1 V image size (”193 mm”)
68 44 # 1 H image size : V image size (”344 : 193”)
69 45 # 1 H boarder (”0”)
70 46 # 1 V boarder (”0”)
71 47
72 48 Detailed timing description # 2
73 49 # 2 Flag
74 4A # 2 Reserved
75 4B # 2 FE (hex) defines ASCII string (Model Name “N156B6-L01”, ASCII)
76 4C # 2 Flag
77 4D # 2 1st character of name (“N”)
78 4E # 2 2nd character of name (“1”)
79 4F # 2 3rd character of name (“5”)
80 50 # 2 4th character of name (“6”)
81 51 # 2 5th character of name (“B”)
82 52 # 2 6th character of name (“6”)
83 53 # 2 7th character of name (“-”)
VESA CVT Rev1.1)
www.jxlcd.com
www.jxlcd.com
# 1 H sync offset : H sync pulse width : V sync of fset : V sync width
(”31: 65 : 4 : 12”)
# 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol
Negatives
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
7E 01111110
1D 00011101
56 01010110
C2 11000010
50 01010000
00 00000000
26 00100110
30 00110000
1F 00011111
41 01000001
4C 01001100
00 00000000
58 01011000
C1 11000001
10 00010000
00 00000000
00 00000000
18 00011000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
4E 01001110
31 00110001
35 00110101
36 00110110
42 01000010
36 00110110
2D 00101101
15 / 29
Version 1.0
Page 16
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
84 54 # 2 8th character of name (“L”)
85 55 # 2 9th character of name (“0”)
86 56 # 2 9th character of name (“1”)
87 57 # 2 New line character indicates end of ASCII string
88 58 # 2 Padding with “Blank” character
89 59 # 2 Padding with “Blank” character
90 5A Detailed timing description # 3
91 5B # 3 Flag
92 5C # 3 Reserved
93 5D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII)
94 5E # 3 Flag
95 5F # 3 1st character of string (“C”)
96 60 # 3 2nd character of string (“M”)
97 61 # 3 3rd character of string (“O”)
98 62 # 3 New line character indicates end of ASCII string
99 63 # 3 Padding with “Blank” character
100 64 # 3 Padding with “Blank” character
101 65 # 3 Padding with “Blank” character
102 66 # 3 Padding with “Blank” character
103 67 # 3 Padding with “Blank” character
104 68 # 3 Padding with “Blank” character
105 69 # 3 Padding with “Blank” character
106 6A # 3 Padding with “Blank” character
107 6B # 3 Padding with “Blank” character
108 6C Detailed timing description # 4
109 6D # 4 Flag
110 6E # 4 Reserved
111 6F
112 70 # 4 Flag
113 71 # 4 1st character of name (“N”) 4E
114 72 # 4 2nd character of name (“1”) 31
115 73 # 4 3rd character of name (“5”) 35
116 74 # 4 4th character of name (“6”) 36
117 75 # 4 5th character of name (“B”) 42
118 76 # 4 6th character of name (“6”) 36
119 77 # 4 7th character of name (“-”) 2D
120 78 # 4 8th character of name (“L”) 4C
121 79 # 4 9th character of name (“0”)
122 7A # 4 9th character of name (“1”)
123 7B # 4 New line character indicates end of ASCII string
124 7C # 4 Padding with “Blank” character
125 7D # 4 Padding with “Blank” character
126 7E Extension flag
127 7F Checksum
www.jxlcd.com
www.jxlcd.com
# 4 FE (hex) defines ASCII string (Model Name“N156B6-L01”,
ASCII)
4C 01001100
30 00110000
31 00110001
0A 00001010
20 00100000
20 00100000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
43 01000011
4D 01001101
4F 01001111
0A 00001010
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
30 00110000
31 00110001
0A 00001010
20 00100000
20 00100000
00 00000000
4F 01001111
01001110
00110001
00110101
00110110
01000010
00110110
00101101
01001100
16 / 29
Version 1.0
Page 17
6. CONVERTER INPUT CONNECTOR PIN ASSIGNMENT
6.1 CONVERTER INPUT CONNECTOR PIN ASSIGNMENT
Pin Symbol Description
1
2
3
4
5
6
7
Note(1) Connector Part No: Aces 87213 or equivalent
Reserved Reserved
PWM PWM control pin for dimming brightness
EN H: backlight on L: backlight off.
Gnd Ground
Gnd Ground
Vin
Vin
Power supply pin (6~21V)
Power supply pin (6~21V)
6.2 ABSOLUTE MAXIMUM RATINGS
Symbol Ratings
Vin 40.0V
Gnd +/-0.3V
PWM, EN -0.3V~6.0V
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
6.3 RECOMMENDED OPERATING RATINGS
Converter Input power supply voltage Vin 6.0 12.0 21.0 V
EN Control Level
PWM Control Level
PWM Control Duty Ratio 20 100 %
PWM Control Frequency f
Converter Input Current
Note (1) The specified LED power supply current is under the conditions at Vin = 6V, Ta = 25 ± 2 ºC, f
Note (2) The specified LED power supply current is under the conditions at Vin = 21V, Ta = 25 ± 2 ºC, f
www.jxlcd.com
www.jxlcd.com
Parameter Symbol
Backlight on 2.0 --- 5.5 V
Backlight off
PWM High Level 2.0 --- 5.5 V
PWM Low Level
Vin=6V 678 795 mA (1)
Vin=21V
200 Hz, Duty=100%.
= 200 Hz, Duty=100%.
Min. Typ. Max.
190 210 230 Hz
PWM
IBL
0 --- 0.8 V
0 --- 0.8 V
194 227 mA (2)
Value
Unit Note
PWM
=
PWM
17 / 29
Version 1.0
Page 18
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 50 75.5 80 MHz (2)
Vertical Total Time TV 778 806 888 TH -
Vertical Active Display Period TVD 768 768 768 TH -
DE
Vertical Active Blanking Period TVB TV-TVD 38 TV-TVD TH
Horizontal Total Time TH 1446 1560 1936 Tc (2)
Horizontal Active Display Period THD 1366 1366 1366 Tc (2)
Horizontal Active Blanking Period THB
TH-THD
194
TH-THD
Tc (2)
INPUT SIGNAL TIMING DIAGRAM
DE
DCLK
DE
DATA
TC
www.jxlcd.com
www.jxlcd.com
T
HD
18 / 29
Version 1.0
Page 19
7.2 POWER ON/OFF SEQUENCE
Power Supply
for LCD, Vcc
- Interface Signal
(LVDS Signal of
Transmitter), V
- Power for LED
0V
0V
I
10%
Power On
90%
t1
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
Restart
t7
10%
10%
t4
Valid Data
ONOFF OFF
Power Off
90%
t3 t2
t6 t5
50%50%
Timing Specifications:
0.5< t1 <= 10 msec
0 < t2 <= 50 msec
0 < t3 <= 50 msec
t4 >= 500 msec
t5 >= 200 msec
www.jxlcd.com
www.jxlcd.com
t6 >= 200 msec
Note (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be
damaged.
Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be
sure to pull down the power supply of LCD Vcc to 0 V.
Note (3) The Backlight converter power must be turned on after the power supply for the logic and the
interface signal is valid. The Backlight converter power must be turned off before the power supply
for the logic and the interface signal is invalid.
Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To
avoid this phenomenon, we suggest that the Vcc falling time is better to follow (50us)≦t7≦(10
ms).
19 / 29
Version 1.0
Page 20
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
8. OPTICAL CHARACTERISTICS
8.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Volt age VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Converter Current IL (120) mA
Converter Sumida-H05-4915
The measurement methods of optical characteristics are shown in Section 8.2. The following items
should be measured under the test conditions described in Section 8.1 and stable environment shown in
Note (5).
25±2
50±10
8.2 OPTICAL SPECIFICATIONS
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 280 400 - - (2), (5)
Response Time
Average Luminance of White
Red
Color
Chromaticity
www.jxlcd.com
www.jxlcd.com
Viewing Angle
White Variation of 5 Points δW5p
Green
Blue
White
Horizontal
Vertical
TR - 3 8 ms
T
- 7 12 ms
F
L
AVE
Rx
Ry
Gx
Gy
Bx
By
Wx 0.313 Wy
θ
+
x
θ
-
x
θ
+
Y
-
θ
Y
θ
=0°, θY =0°
x
Viewing Normal Angle
CR≥10
θ
=0°, θY =0°
x
175 220 - cd/m
TBD
TBD
TBD
TYP.
-0.05
40 45 40 45 15 20 40 45 75 85 - % (5),(6)
TBD
TBD
TBD
0.329
TYP.
+0.05
o
C
%RH
(3)
2
(4), (6)
-
-
-
-
-
-
-
Deg. (1),(5)
(1)
20 / 29
Version 1.0
Page 21
Note (1) Definition of Viewing Angle (θx, θy):
.67 ms
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
Note (2) Definition of Contrast Ratio (CR):
θX- = 90º
6 o’clock
θ
y- = 90º
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
x-
y-
Normal
θx = θy = 0º
θy- θy+
θx−
θx+
y+
12 o’clock direction
θ
y+ = 90º
x+
θX+ = 90º
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
www.jxlcd.com
CR = CR (1)
www.jxlcd.com
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (T
100%
90%
Optical
Response
10%
0%
T
R
66.67 ms
, TF):
R
66
Time
T
F
21 / 29
Version 1.0
Page 22
Doc No.: 44085014
500
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
Note (4) Definition of Average Luminance of White (L
Measure the luminance of gray level 63 at 5 points
L
= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
AVE
L (x) is corresponding to the luminance of the point X at Figure in Note (6)
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
USB2000
AVE
):
CS-1000T
Center of the Screen
www.jxlcd.com
www.jxlcd.com
mm
Light Shield Room
(Ambient Luminance < 2 lux)
22 / 29
Version 1.0
Page 23
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
= Minimum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / Maximum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)]
δW
5p
10mm
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
6
H/4
2
H
H/4 H/4 H/4
9
45
11
10mm 10mm
10mm
www.jxlcd.com
www.jxlcd.com
W/4 W/4 W/4 W/4
7
3
1
12
W
8
X
: Test Point
10
13
X=1 to 13
Active area
23 / 29
Version 1.0
Page 24
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
9. PRECAUTIONS
9.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not
to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is
very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use
Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might
permanently damage the polarizer due to chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for
a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed a way thoroug hly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
www.jxlcd.com
(11) Pins of I/F connector should not be touched directly with bare hands.
8.2 STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.
www.jxlcd.com
8.3 OPERATION P RECAUTIONS
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This
can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with converter . Do not disassemble the module or insert anything into the Backlight unit.
24 / 29
Version 1.0
Page 25
10. PACKING
10.1 CARTON
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
www.jxlcd.com
www.jxlcd.com
Figure. 10-1 Packing method
25 / 29
Version 1.0
Page 26
10.2 PALLET
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
www.jxlcd.com
www.jxlcd.com
Figure. 10-2 Packing method
26 / 29
Version 1.0
Page 27
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
11. DEFINITION OF LABELS
11.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
(a) Model Name: N156B6 - L02
(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X
www.jxlcd.com
Serial ID includes the information as below:
www.jxlcd.com
X X X X X Y M D L N N N N
Figure. 9-3 Packing method
-
Rev. XX
xxxx
Serial No.
Product Line
Year, Month, Date
CMO Internal Use
Revision
CMO Internal Use
(a) Manufactured Date: Year: 1~9, for 2001~2009
Month: 1~9, A~C, for Jan. ~ De c.
Day: 1~9, A~Y, for 1
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.
st
to 31st, exclude I , O and U
27 / 29
Version 1.0
Page 28
11.2 CARTON LABEL
Doc No.: 44085014
Issued Date: Jul. 09, 2008
Model No.: N156B6-L01
Preliminary
www.jxlcd.com
www.jxlcd.com
28 / 29
Version 1.0
Page 29
www.jxlcd.com
www.jxlcd.com
Loading...