Datasheet N-150P5-L01 Datasheet (Chi Mei Optoelectronics)

www.jxlcd.com

www.jxlcd.com

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.4 COLOR DATA INPUT ASSIGNMENT

5.5 EDID DATA STRUCTURE

5.6 EDID SIGNAL SPECIFICATION

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PRECAUTIONS

8.1 HANDLING PRECAUTIONS

8.2 STORAGE PRECAUTIONS

8.3 OPERATION PRECAUTIONS

9. PACKING ------------------------------------------------------- 23

9.1 CARTON

9.2 PALLET

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL

10.2 CARTON LABEL

www.jxlcd.com

www.jxlcd.com

------------------------------------------------------- 3

------------------------------------------------------- 4

------------------------------------------------------- 5

------------------------------------------------------- 7

------------------------------------------------------- 10

------------------------------------------------------- 11

------------------------------------------------------- 17

------------------------------------------------------- 19

------------------------------------------------------- 22

------------------------------------------------------- 24

2 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

REVISION HISTORY

Version Date

Ver 3.0

Ver 3.1

Aug.11. ‘05

Oct.24 ‘05

www.jxlcd.com

www.jxlcd.com

Page

(New)

Pg1

Section Description

All

All

cover

Issue Approval Specification for HP

Modified cover page title HP to HP/IEC

3 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

1. GENERAL DESCRIPTION

1.1 OVERVIEW

N150P5 is a 15.0” TFT Liquid Crystal Display module with single CCFL Backlight unit and 30 pins LVDS

interface. This module supports 1400x 1050 SXGA+ mode and can display 262,144 colors. The optimum

viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.

1.2 FEATURES

- Thin and light weight

- SXGA+ (1400 x 1050 pixels) resolution

- DE (Data Enable) only mode

- 2 channel 3.3V LVDS (Low Voltage Differential Signaling) interface

- Support EDID Structure Version 1 Revision 3

Approval

1.3 APPLICATION

- TFT LCD Notebook

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Active Area 304.5 (H) x 228.375 (V) (15” diagonal) mm
Bezel Opening Area 308.1 (H) x 232 (V) mm
Driver Element a-si TFT active matrix - ­Pixel Number 1400 x R.G.B. x 1050 pixel ­Pixel Pitch 0.2175 (H) x 0.2175 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 262,144 color ­Transmissive Mode Normally white - ­Surface Treatment Hardness (3H), Anti-glare (Haze 25) - -

1.5 MECHANICAL SPECIFICATIONS

Module Size

I/F connector mounting position The mounting inclination of the connector makes the screen

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

www.jxlcd.com

www.jxlcd.com

Item Min. Typ. Max. Unit Note

Horizontal(H) 316.8 317.3 317.8 mm
Vertical(V) 241.5 242.0 242.5 mm
Depth(D) - 5.7 6.0 mm

Weight - 530 550 g -

center within ±0.5mm as the horizontal.

(1)

(1)

(2)

(2) Connector mounting position

+/- 0.5mm

4 / 26

Version 3.1

Issued Date: Oct.24, 2005

A

Model No.: N150P5-L01

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ≦ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation .

- 220/2 G/ms (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Value

Min. Max.

Unit Note

www.jxlcd.com

Note (2) The temperature of panel surface should be 0 ºC Min. and 50 ºC Max.

Note (3) Condition for 220/2 G/ms is Half Sine Wave.

www.jxlcd.com

Relative Humidity (%RH)

100

90

80

60

40

20

Operating Range

Storage Range

5

Temperature (ºC)

8060 -20 400 20-40

Note (4) 10 ~ 200 Hz, 0.5 Hr / Cycle, 1 cycles for each X, Y, Z. The fixing condition is shown as below:

Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

Version 3.1

t Room Temperature

Side Mount Fixing Screw

Gap=2mm

so that the module would not be twisted or bent by the fixture.

Bracket

5 / 26

LCD Module

Side Mount Fixing Screw

Stage

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +4.0 V
Logic Input Voltage VIN -0.3 Vcc+0.3 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 2.5K V
Lamp Current IL - 7.0 mA
Lamp Frequency FL - 80 KHz

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Min. Max.

Min. Max.

Value

Value

Unit Note

(1)

Unit Note

(1), (2), IL = (6.0) mA

RMS

RMS

(1), (2)

Note (2) Specified values are for lamp (Refer to Section 3.2 for further information).

www.jxlcd.com

www.jxlcd.com

6 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max.
Power Supply Voltage Vcc 3.0 3.3 3.6 V ­Ripple Voltage VRP - 50 - mV ­Rush Current I

Power Supply Current

White - 400 450 mA (3)a
Black

- - 1.5 A (2)

RUSH

lcc

- 530 580 mA (3)b

“H” Level VIH - - +100 mV - Differential Input Voltage for

LVDS Receiver Threshold

“L” Level V

-100 - - mV -

IL

Terminating Resistor RT - 100 - Ohm -

Note (1) The module should be always operated within above ranges.

Note (2) Measurement Conditions:

Value

Unit Note

+3.3V

R1

47K

Q1 2SK1475

FUSE

C3

1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

www.jxlcd.com

+12V

www.jxlcd.com

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470us

+3.3V

0.9Vcc

0.1Vcc

GND

470us

7 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, DC

Current and f

a. White Pattern

= 60 Hz, whereas a power dissipation check pattern below is displayed.

v

b. Black Pattern

Active Area

Active Area

3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC

Parameter Symbol

Lamp Input Voltage VL 641 675 709 V
Lamp Current IL 2.0 6.0 7.0 mA

Lamp Turn On Voltage VS

Operating Frequency FL 45 65 80 KHz (3)
Power Consumption PL - 4.05 - W (4), IL = 6.0 mA
Lamp Life Time LBL 10,000 - - Hrs (5)
Leakage Current IIN-I

Note (1) Lamp current is measured by utilizing a high frequency current meter as shown below:

www.jxlcd.com

www.jxlcd.com

LCD

Module

- - 1.0 mA (7)

OUT

HV (Pink)

LV (Black)

Min. Typ. Max.

- - 1150 (25

- - 1385 (0

Value

1

2

Current Meter

Unit Note

o

C) V

o

C) V

I

RMS

RMS

(2)

RMS

(2)

RMS

= 6.0 mA

L

(1)

Inverter

A

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.

Otherwise the lamp may not be turned on.

Note (3) The lamp frequency may generate interference with horizontal synchronous frequency from the

display, and this may cause line flow on the display. In order to avoid interference, the lamp

frequency should be detached from the horizontal synchronous frequency and its harmonics as far

as possible.

Note (4) P

Note (5) The lifetime of lamp is defined as the time when it continues to operate under the conditions at Ta

= IL ×VL

L

= 25 ±2

(a) When the brightness becomes ≦ 50% of its original value.

(b) When the effective ignition length becomes ≦ 80% of its original value. (Effective ignition

o

C and IL = 6.0 mA

length is defined as an area that the brightness is less than 70% compared to the center point.)

until one of the following events occurs:

RMS

8 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for

the lamp. All the parameters of an inverter should be carefully designed to avoid generating too

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrument.

Note (7) The lamp leakage current is measured by the current difference between in and out. And the

measurement condition is as below:

Approval

LCD Module

FG

Low

I

Low

www.jxlcd.com

www.jxlcd.com

GND

Current Probe

Inverter

I

Leak(RMS)

= I

Lamp

High(RMS)

- I

Low(RMS)

High

Current Probe

I

High

9 / 26

Version 3.1

4. BLOCK DIAGRAM

)

4.1 TFT LCD MODULE

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Rxin0(+/-)

Rxin1(+/-)

Rxin2(+/-)

CLK(+/-)

Vcc

(JAE-FI-XB30SL-HF10)

GND

Data

CLK

V

EDID

EDID

EDID

VL

LAMP CONNECTOR

4.2 BACKLIGHT UNIT

INPUT CONNECTOR

(JST-BHSR-02VS-1)

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

LVDS INPUT /

GENERATOR

EDID

EEPROM

SCAN DRIVER IC

TFT LCD PANEL

(1400x3x1050)

DATA DRIVER IC

BACKLIGHT UNIT

www.jxlcd.com

www.jxlcd.com

1 HV (Pink)

2 LV (Black

10 / 26

Version 3.1

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Symbol Description Polarity Remark

1 Vss Ground ­2 Vcc Power Supply +3.3 V ­3 Vcc Power Supply +3.3 V ­4 V
5 NC Non-Connection ­6 CLK
7 DATA
8 RXE0- LVDS Differential Data Input(even) Negative
9 RXE0+ LVDS Differential Data Input(even) Positive

10 Vss Ground -

11 RXE1- LVDS Differential Data Input(even) Negative
12 RXE1+ LVDS Differential Data Input(even) Positive
13 Vss Ground ­14 RXE2- LVDS Differential Data Input(even) Negative
15 RXE2+ LVDS Differential Data Input(even) Positive
16 Vss Ground ­17 RXEC- LVDS Clock Data Input(even) Negative
18 RXEC+ LVDS Clock Data Input(even) Positive
19 Vss Ground ­20 RXO0- LVDS Differential Data Input(odd) Negative
21 RXO0+ LVDS Differential Data Input(odd) Positive
22 Vss Ground ­23 RXO1- LVDS Differential Data Input(odd) Negative
24 RXO1+ LVDS Differential Data Input(odd) Positive
25 Vss Ground ­26 RXO2- LVDS Differential Data Input(odd) Negative
27 RXO2+ LVDS Differential Data Input(odd) Positive
28 Vss Ground ­29 RXOC- LVDS Clock Data Input(odd) Negative
30 RXOC+ LVDS Clock Data Input(odd) Positive

Note (1) The first pixel is even.

www.jxlcd.com

www.jxlcd.com

DDC +3.3V -

EDID

DDC Clock -

EDID

DDC Data -

EDID

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

R0~R5,G0

G1~G5,B0,B1

B2~B5,DE,Hsync,Vsync

LVDS Level

R0~R5,G0

G1~G5,B0,B1

B2~B5,DE,Hsync,Vsync

LVDS Level

Note (2) Connector Part No.: JAE-FI-XB30SL-HF10 or equivalent

Note (3) User’s connector Part No: JAE-FI-X30C2L or equivalen

5.2 BACKLIGHT UNIT

Pin Symbol Description Color

1 HV High Voltage Pink
2 LV Ground Black

Note (1) Connector Part No.: JST-BHSR-02VS-1 or equivalent

Note (2) User’s connector Part No.: JST-SM02B-BHSS-1-TB or equivalent

11 / 26

Version 3.1

5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL

RXEC+

T/7

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

RXE2+

RXE1+

RXE0+

RXOC+

RXO2+

RXO1+

RXO0+

IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE B5 B4 B3 B2Vsync Hsync

IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 G4 G3 G2 G1B0 G5

IN6 IN5 IN4 IN3 IN2 IN1 IN0

G0 R3 R2 R1 R0R5 R4

Signal for 1 DCLK Cycle (T)

T/7

IN20 IN19 IN18 IN17 IN16 IN15 IN14

DE B5 B4 B3 B2Vsync Hsync

IN13 IN12 IN11 IN10 IN9 IN8 IN7

B1 G4 G3 G2 G1B0 G5

www.jxlcd.com

www.jxlcd.com

IN6 IN5 IN4 IN3 IN2 IN1 IN0

G0 R3 R2 R1 R0R5 R4

Signal for 1 DCLK Cycle (T)

12 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

5.4 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for

the color. The higher the binary input the brighter the color. The table below provides the assignment of

color versus data input.

Data Signal

Color

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green

Basic
Colors

Gray
Scale
Of
Red

Gray
Scale
Of
Green

Gray
Scale
Of
Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)

:

:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)

:

:
Green(61)

www.jxlcd.com

www.jxlcd.com

Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)

:

:
Blue(61)
Blue(62)
Blue(63)

0
1
0
0
0
1
1
1
0
0
0

:

:
1
1
1
0
0
0

:

:
0
0
0
0
0
0

:

:
0
0
0

Red Green Blue

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

1

1

1

1

0

1

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

0
0
0
1
1
1
0
1
0
0
0

:

:
0
0
0
0
0
0

:

:
0
0
0
0
1
0

:

:
1
0
1

13 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

5.5 EDID DATA STRUCTURE

The EDID (Extended Display Identification Data) data formats are to support displays as defined in the

VESA Plug & Display and FPDI standards.

Byte #

(decimal)

0 0 Header 00 00000000
1 1 H e a d er FF 11111111
2 2 H e a d er FF 11111111
3 3 H e a d er FF 11111111
4 4 H e a d er FF 11111111
5 5 H e a d er FF 11111111
6 6 H e a d er FF 11111111
7 7 Header 00 00000000
8 8 EISA ID manufacturer name (“CMO”) 0D 00001101
9 9 EISA ID manufacturer name (Compressed ASCII) AF 10101111

10 0A ID product code (N150P5-L01) 08 00001000

11 0B ID product code (hex LSB first; N150P5-L01) 15 00010101
12 0C ID S/N (fixed “0”) 00 00000000
13 0D ID S/N (fixed “0”) 00 00000000
14 0E ID S/N (fixed “0”) 00 00000000
15 0F ID S/N (fixed “0”) 00 00000000
16 10 Week of manufacture (fixed “53”) 35 00110101
17 11 Year of manufacture (fixed “2004”) 0E 00001110
18 12 EDID structure version # (“1”) 01 00000001
19 13 EDID revision # (“3”) 03 00000011
20 14 Video I/P definition (“digital”) 80 10000000
21 15 Max H image size (“30.45 cm”) 1E 00011110
22 16 Max V image size (“22.837 cm”) 17 00011110
23 17 Display Gamma (Gamma = ”2.2”) 78 01111000
24 18 Feature support (“Active off, RGB Color”) 0A 00001010
25 19 Red/Green (Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0) 05 00000101
26 1A Blue/White (Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0) 60 01100000
27 1B Red-x (Rx = 0.590) 97 10010111
28 1C Red-y (Ry = 0.340) 57 01010111
29 1D Green-x (Gx = 0.318) 51 01010001
30 1E Green-y (Gy = 0.537) 89 10001001
31 1F Blue-x (Bx = 0.150) 4C 01001100
32 20 Blue-y (By = 0.120) 1E 00011110
33 21 White-x (Wx = 0.313) 50 01010000
34 22 White-y (Wy = 0.329) 54 01010100
35 23 Established timings 1 00 00000000
36 24 Established timings 2 (1400x1050@60Hz) 08 00001000
37 25 Manufacturer’s reserved timings 00 00000000
38 26 Standard timing ID # 1 01 00000001
39 27 Standard timing ID # 1 01 00000001
40 28 Standard timing ID # 2 01 00000001
41 29 Standard timing ID # 2 01 00000001

Byte #

(hex)

www.jxlcd.com

www.jxlcd.com

Field Name and Comments

Value

(hex)

Value

(binary)

14 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Byte #

(decimal)

42 2A Standard timing ID # 3 01 00000001
43 2B Standard timing ID # 3 01 00000001
44 2C Standard timing ID # 4 01 00000001
45 2D Standard timing ID # 4 01 00000001
46 2E Standard timing ID # 5 01 00000001
47 2F Standard timing ID # 5 01 00000001
48 30 Standard timing ID # 6 01 00000001
49 31 Standard timing ID # 6 01 00000001
50 32 Standard timing ID # 7 01 00000001
51 33 Standard timing ID # 7 01 00000001
52 34 Standard timing ID # 8 01 00000001
53 35 Standard timing ID # 8 01 00000001
54 36 Detailed timing description # 1 Pixel clock (“108 MHz”) 30 00110000
55 37 # 1 Pixel clock (hex LSB first) 2A 00101010
56 38 # 1 H active (“1400”) 78 01111000
57 39 # 1 H blank (“288”) 20 00100000
58 3A # 1 H active : H blank (“1400 : 288”) 51 01010001
59 3B # 1 V active (”1050”) 1A 00011010
60 3C # 1 V blank (”16”) 10 00010000
61 3D # 1 V active : V blank (”1050 : 16”) 40 01000000
62 3E # 1 H sync offset (”48”) 30 00110000
63 3F # 1 H sync pulse width (”112”) 70 01110000
64 40 # 1 V sync offset : V sync pulse width (”3 : 4”) 34 00110100

65 41

66 42 # 1 H image size (”304.5 mm”) 30 00110000
67 43 # 1 V image size (”228.37 mm”) E4 11100100
68 44 # 1 H image size : V image size (”304 : 228”) 10 00010000
69 45 # 1 H boarder (”0”) 00 00000000
70 46 # 1 V boarder (”0”) 00 00000000
71 47 # 1 Flags (”Non-Interlace, Non-Stereo, Digital Separate”) 18 00011000
72 48 Detailed timing description # 2 00 00000000
73 49 # 2 Flag 00 00000000
74 4A # 2 Reserved 00 00000000

75 4B

76 4C # 2 Flag 00 00000000
77 4D # 2 1st character of string (“N”) 4E 01001110
78 4E # 2 2nd character of string (“1”) 31 00110001
79 4F # 2 3rd character of string (“5”) 35 00110101
80 50 # 2 4th character of string (“0”) 30 00110000
81 51 # 2 5th character of string (“P”) 50 01010000
82 52 # 2 6th character of string (“5”) 35 00111001
83 53 # 2 New line character # 2 indicates end of ASCII string 0A 00001010

84 54 # 2 Padding with “Blank” character 20 00100000

85 55 # 2 Padding with “Blank” character 20 00100000

Byte #

(hex)

www.jxlcd.com

www.jxlcd.com

# 1 H sync offset : H sync pulse width : V sync offset : V sync
width (”48 : 112 : 3 : 4”)

# 2 FE (hex) defines ASCII string (Model Name “N150P5”,
ASCII)

Field Name and Comments

Value

(hex)

00 00000000

FE 11111110

(binary)

Value

15 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Byte #

(decimal)

42 2A Standard timing ID # 3 01 00000001
43 2B Standard timing ID # 3 01 00000001
44 2C Standard timing ID # 4 01 00000001
45 2D Standard timing ID # 4 01 00000001
46 2E Standard timing ID # 5 01 00000001
47 2F Standard timing ID # 5 01 00000001
48 30 Standard timing ID # 6 01 00000001
49 31 Standard timing ID # 6 01 00000001
50 32 Standard timing ID # 7 01 00000001
51 33 Standard timing ID # 7 01 00000001
52 34 Standard timing ID # 8 01 00000001
53 35 Standard timing ID # 8 01 00000001
54 36 Detailed timing description # 1 Pixel clock (“108 MHz”) 30 00110000
55 37 # 1 Pixel clock (hex LSB first) 2A 00101010
56 38 # 1 H active (“1400”) 78 01111000
57 39 # 1 H blank (“288”) 20 00100000
58 3A # 1 H active : H blank (“1400 : 288”) 51 01010001
59 3B # 1 V active (”1050”) 1A 00011010
60 3C # 1 V blank (”16”) 10 00010000
61 3D # 1 V active : V blank (”1050 : 16”) 40 01000000
62 3E # 1 H sync offset (”48”) 30 00110000
63 3F # 1 H sync pulse width (”112”) 70 01110000
64 40 # 1 V sync offset : V sync pulse width (”3 : 4”) 34 00110100

65 41

66 42 # 1 H image size (”304.5 mm”) 30 00110000
67 43 # 1 V image size (”228.37 mm”) E4 11100100
68 44 # 1 H image size : V image size (”304 : 228”) 10 00010000
69 45 # 1 H boarder (”0”) 00 00000000
70 46 # 1 V boarder (”0”) 00 00000000
71 47 # 1 Flags (”Non-Interlace, Non-Stereo, Digital Separate”) 18 00011000
72 48 Detailed timing description # 2 00 00000000
73 49 # 2 Flag 00 00000000
74 4A # 2 Reserved 00 00000000

75 4B

76 4C # 2 Flag 00 00000000
77 4D # 2 1st character of string (“N”) 4E 01001110
78 4E # 2 2nd character of string (“1”) 31 00110001
79 4F # 2 3rd character of string (“5”) 35 00110101
80 50 # 2 4th character of string (“0”) 30 00110000
81 51 # 2 5th character of string (“P”) 50 01010000
82 52 # 2 6th character of string (“5”) 35 00111001
83 53 # 2 New line character # 2 indicates end of ASCII string 0A 00001010

84 54 # 2 Padding with “Blank” character 20 00100000

Byte #

(hex)

www.jxlcd.com

www.jxlcd.com

# 1 H sync offset : H sync pulse width : V sync offset : V sync
width (”48 : 112 : 3 : 4”)

# 2 FE (hex) defines ASCII string (Model Name “N150P5”,
ASCII)

Field Name and Comments

Value

(hex)

00 00000000

FE 11111110

(binary)

Value

16 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

85 55 # 2 Padding with “Blank” character 20 00100000

Byte #

(decimal)

86 56 # 2 Padding with “Blank” character 20 00100000
87 57 # 2 Padding with “Blank” character 20 00100000
88 58 # 2 Padding with “Blank” character 20 00100000
89 59 # 2 Padding with “Blank” character 20 00100000
90 5A Detailed timing description # 3 00 00000000
91 5B # 3 Flag 00 00000000
92 5C # 3 Reserved 00 00000000
93 5D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII) FE 11111110
94 5E # 3 Flag 00 00000000
95 5F # 3 1st character of string (“C”) 43 01000011
96 60 # 3 2nd character of string (“M”) 4D 01001101
97 61 # 3 3rd character of string (“O”) 4F 01001111
98 62 # 3 New line character # 3 indicates end of ASCII string 0A 00001010
99 63 # 3 Padding with “Blank” character 20 00100000

100 64 # 3 Padding with “Blank” character 20 00100000
101 65 # 3 Padding with “Blank” character 20 00100000
102 66 # 3 Padding with “Blank” character 20 00100000
103 67 # 3 Padding with “Blank” character 20 00100000
104 68 # 3 Padding with “Blank” character 20 00100000
105 69 # 3 Padding with “Blank” character 20 00100000
106 6A # 3 Padding with “Blank” character 20 00100000
107 6B # 3 Padding with “Blank” character 20 00100000
108 0A Detailed timing description # 4 00 00000000
109 6D # 4 Flag 00 00000000
110 6E # 4 Reserved 00 00000000

111 6F

112 70 # 4 Flag 00 00000000
113 71
114 72
115 73
116 74
117 75
118 76
119 77
120 78
121 79
122 7A
123 7B
124 7C # 4 Padding with “Blank” character 20 00100000
125 7D # 4 Padding with “Blank” character 20 00100000
126 7E Extension flag 00 00000000
127 7F Checksum DE 11011110

Byte #

(hex)

www.jxlcd.com

www.jxlcd.com

# 4 FC (hex) defines Monitor name (“Model Name
“N150P5-L01”, ASCII)

st

# 4 1

character of name (“N”)

nd

# 4 2

character of name (“1”)

rd

# 4 3

character of name (“5”)

th

character of name (“0”)

# 4 4

th

# 4 5

character of name (“P”)

th

# 4 6

character of name (“5”)

th

character of name (“-”)

# 4 7

th

# 4 8

character of name (“L”)

th

# 4 9

character of name (“0”)

th

# 4 9

character of name (“1”)

# 4 New line character # 4 indicates end of ASCII string

Field Name and Comments

Value

(hex)

FC 11111100

4E 01001110

31 00110001
35 00110101
30 00110000
50 01010000

35 00111001
2D 00101101
4C 01001100

30 00110000

31 00110001
0A 00001010

Value

(binary)

17 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

DCLK Frequency 1/Tc 51 54 57 MHz -

Vertical Total Time TV 1058 1066 2046 TH -

DE

Vertical Addressing Time TVD 1050 1050 1050 TH -

Horizontal Total Time TH 762 844 1023 Tc -

Horizontal Addressing Time THD 700 700 700 Tc -

INPUT SIGNAL TIMING DIAGRAM ( Horizontal Timing Chart )

www.jxlcd.com

www.jxlcd.com

INPUT SIGNAL TIMING DIAGRAM ( Vertical Timing Chart )

18 / 26

Version 3.1

6.2 POWER ON/OFF SEQUENCE

Power On

90%

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Restart

Power Off

90%

t4

Power Supply

for LCD, Vcc

- Interface Signal
(LVDS Signal of
Transmitter), V

- Power for Lamp

Timing Specifications:

470us ≦ t1 ≦ 10 msec

0 < t2 ≦ 50 msec

0 < t3 ≦ 50 msec

Note (1) Please avoid floating state of interface signal at invalid period.

www.jxlcd.com

0V

0V

I

t4 ≧ 500 msec

t5 ≧ 200 msec

t6 ≧ 200 msec

www.jxlcd.com

10%

t1

Valid Data

ONOFF OFF

10%

t3t2

t6 t5

10%

Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V.

Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the

interface signal is valid. The Backlight inverter power must be turned off before the power supply

for the logic and the interface signal is invalid.

Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To

avoid this phenomenon, we suggest that the Vcc falling time had better to follow t7 ≧ 5 msec

6.3 Momentary Voltage Drops

(1) When 2.4V ≦ Vcc ＜3.0V and td≦10ms , the unit must work normally when VCC return to 3.0V.

(2) When Vcc < 2.4V, momentary voltage shall conform to the input voltage sequence.

19 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit
Ambient Temperature Ta 25±2
Ambient Humidity Ha 50±10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Inverter Current IL
Inverter Driving Frequency FL
Inverter Sumida H05-4915

The measurement methods of optical characteristics are shown in Section 7.2. The following items

should be measured under the test conditions described in Section 7.1 and stable environment shown in

Note (6).

6.0
55

o

C

mA

KHz

7.2 OPTICAL SPECIFICATIONS

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 300 400 - - (2), (5)

Response Time

Average Luminance of White L
White Variation of 5 Points δW - - 1.25 - (5), (6)

Red

Color
Chromaticity

Viewing Angle

www.jxlcd.com

www.jxlcd.com

Green

Blue

White

Horizontal

Vertical

TR
T

F

170 200 - cd/m2(4), (5)

AVE

Rx 0.590 ­Ry 0.340 ­Gx 0.318 ­Gy 0.537 -

Bx 0.150 -

By 0.120 ­Wx 0.313 ­Wy

θx+ 50 60 -

θ

- 50 60 -

x

θY+ 30 40 -

θ

-

Y

θ

=0°, θY =0°

x

Viewing Normal Angle

CR≥10

- 5 10 ms

- 11 16 ms

Typ.

-0.03

0.329

50 60 -

Typ.

+0.03

Deg. (1), (5)

(3)

(1), (5)

-

20 / 26

Version 3.1

Note (1) Definition of Viewing Angle (θx, θy):

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Note (2) Definition of Contrast Ratio (CR):

θX- = 90º

6 o’clock

θ

y- = 90º

The contrast ratio can be calculated by the following expression.

x-

y-

Normal

θx = θy = 0º

θy- θy+

θx-

θx+

y+

12 o’clock direction

θ

y+ = 90º

x+

θX+ = 90º

Contrast Ratio (CR) = L63 / L0

L63: Luminance of gray level 63

www.jxlcd.com

L 0: Luminance of gray level 0

www.jxlcd.com

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 63

R

T

R

, TF):

Gray Level 0

Gray Level 63

Time

T

F

66.6ms

66.6ms

21 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

Note (4) Definition of Average Luminance of White (L

Measure the luminance of gray level 63 at 5 points

L

= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5

AVE

L (x) is corresponding to the luminance of the point X at Figure in Note (7).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

Field of View = 2º

AVE

):

Photometer

(CA210, BM-5A, CS-1000T)

www.jxlcd.com

Note (6) Definition of White Variation (δW):

www.jxlcd.com

Measure the luminance of gray level 63 at 5 points

δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]

Vertical Line

500 mm

Horizontal Line

D

Light Shield Room

(Ambient Luminance < 2 lux)

5

: Test Point

=

Version 3.1

Active Area

22 / 26

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

8. PRECAUTIONS

8.1 HANDLING PRECAUTIONS

(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not

to twist or bend the module.

(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause

electrical short or damage the polarizer.

(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and

assembly process.

(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is

very soft and easily scratched.

(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use

Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might

Approval

permanently damage the polarizer due to chemical reaction.

(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for

a long time.

(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.

(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.

(9) Do not disassemble the module.

(10) Do not pull or fold the lamp wire.

www.jxlcd.com

(11) Pins of I/F connector should not be touched directly with bare hands.

8.2 STORAGE PRECAUTIONS

(1) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may

damage LCD module when it is operating.

(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the

response time will become slowly, and the starting voltage of lamp will be higher than the room

www.jxlcd.com

temperature.

8.3 OPERATION PRECAUTIONS

(1) Do not pull the I/F connector in or out while the module is operating.

(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This

can prevent the CMOS LSI chips from damage during latch-up.

(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.

23 / 26

Version 3.1

9. PACKING

9.1 CARTON

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

9.2 PALLET

www.jxlcd.com

www.jxlcd.com

24 / 26

Version 3.1

Issued Date: Oct.24, 2005
Model No.: N150P5-L01

Approval

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

E207943

MADE IN TAIWAN

01A

01A

N141X5 - L03 Rev .XX

X X X X X X X Y M D L N N N N

-

C P 1 3 5 4 4 8 - 0 1

(a) Model Name: N150P5 - L01

(b) Revision: Rev. XX, for example: A1, …, C1, C2 …etc.

(c) Serial ID: X X

Serial ID includes the information as below:

www.jxlcd.com

(a) Manufactured Date: Year: 1~9, for 2001~2009

www.jxlcd.com

X X X X X Y M D X N N N N

Serial No.

CMO Internal Use

Year, Month, Date

CMO Internal Use

Revision

CMO Internal Use

(b) Revision Code: cover all the change

(c) Serial No.: Manufacturing sequence of product

10.2 CARTON LABEL

Month: 1~9, A~C, for Jan. ~ Dec.

st

Day: 1~9, A~Y, for 1

to 31st, exclude I , O and U

25 / 26

Version 3.1

www.jxlcd.com

www.jxlcd.com