Page 1
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
TFT LCD Approval Specification
MODEL NO.: N133B6-L02
Customer :
Approved by :
Note :
www.jxlcd.com
www.jxlcd.com
核准時間 部門 審核 角色 投票
楊
2009.12.25
竣 傑
Director Accept
2009-12-25
14:20:28
NB
產品管理處
1 / 33
Version 2.0
Page 2
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.3 COLOR DAT A INPUT ASSIGNMENT
5.4 EDID DATA STRUCTURE
6. CONVERTER
6.1 ABSOLUTE MAXIMUM RATINGS
6.2 RECOMMENDED OPERATING RATINGS
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
7.2 POWER ON/OFF SEQUENCE
8. OPTICAL CHARACTERISTICS
8.1 TEST CONDITIONS
8.2 OPTICAL SPECIFICATIONS
9. PRECAUTIONS
9.1 HANDLING PRECAUTIONS
9.2 STORAGE PRECAUTIONS
9.3 OPERATION PRECAUTIONS
10. PACKING ------------------------------------------------------- 29
10.1 CARTON
10.2 PALLET
11. DEFINITION OF LABELS
11.1 CMO MODULE LABEL
11.2 CARTON LABEL
12. MECHANICAL DRAWING
www.jxlcd.com
www.jxlcd.com
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 11
------------------------------------------------------- 12
------------------------------------------------------- 19
------------------------------------------------------- 21
------------------------------------------------------- 24
------------------------------------------------------- 28
------------------------------------------------------- 31
------------------------------------------------------- 33
2 / 33
Version 2.0
Page 3
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Version Date
Ver. 0.0
Ver. 1.0
Ver. 1.1
Ver.2.0
Oct.17,2009
Nov.06, 2009
Dec.25,2009
Jul.24,2009
www.jxlcd.com
www.jxlcd.com
Page
(New)
All
All
31
33
All
REVISION HISTORY
Section Description
Tentative spec 0.0 was first issued for N133B6-L02
All
Preliminary spec 1.0 was first issued for N133B6-L02
All
Update module label form.
11
Update module label form.
12
Approval spec was first issued for N133B6-L02.
All
3 / 33
Version 2.0
Page 4
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N133B6-L02 is a 13.3” (13.3” diagonal) TFT Liquid Crystal Display module with LED Backlight unit and 40
pins LVDS interface. This module supports 1366 x 768 HD mode and can display 262,144 colors. The
optimum viewing angle is at 6 o’clock direction.
1.2 FEATURES
- HD (1366 x 768 pixels) resolution
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
- WLED
- LED converter embedded
1.3 APPLICA TION
Approval
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 293.4168 (H) x 164.9664 (V) (13.3” diagonal) mm
Bezel Opening Area 297.47 (H) x 168.67 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.2148 (H) x 0.2148 (V) mm Pixel Arrange ment RGB vertical stripe - Display Colors 262,144 color Transmissive Mode Normally white - Surface Treatment Glare, 3H - -
1.5 MECHANICAL SPECIFICATIONS
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Note
Horizontal(H) 307.1 307.6 308.1 mm
Vertical(V) 182.6 183.1 183.6 mm
Thickness(T) - 4.9 5.2 mm
Weight --- 315 330 g -
(1)
(1)
4 / 33
Version 2.0
Page 5
Doc No.: 400038508
A
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 50 ºC max.
Relative Humidity (%RH)
100
90
- 220/2 G/ms (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Min. Max.
Value
Unit Note
80
60
40
www.jxlcd.com
www.jxlcd.com
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (220G / 2ms) is half Sine Wave,.
Note (4) 10~500 Hz, 0.5hr/cycle 1cycle for X, Y, Z
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard an d rigid enough
so that the module would not be twisted or bent by the fixture.
20
10
Operating Range
Storage Range
80 60 -20 40 0 20 -40
Temperature (ºC)
The fixing condition is shown as below:
t Room Temperature
Side Mount Fixing Screw
Gap=2mm
Bracket
5 / 33
LCD Module
Side Mount Fixing Screw
Stage
Version 2.0
Page 6
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply V oltage VCCS -0.3 +4.0 V
Logic Input Voltage VI -0.3 VCCS+0.3 V
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Co nditions.
2.2.2 BACKLIGHT UNIT
Item
LED Light Bar Power Supply Voltage -40 28 VDC
LED Light Bar Power Supply Current 0 100 mADC
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
Min. Max.
Min Max.
Value
Value
Unit Note
(1)
Unit Note
(1), (2)
should be restricted to the conditions described under Normal Operating Co nditions.
Note (2) Specified values are for LED (Refer to Section 3.2 for further information).
www.jxlcd.com
www.jxlcd.com
6 / 33
Version 2.0
Page 7
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply V oltage VCCS 3.0 3.3 3.6 V Ripple Voltage VRP - 50 - mV Inrush Current I
- - 1.5 A (2)
INRUSH
Initial Stage Current IIS - - 1.0 A (2)
Power Supply Current
LVDS Differential Input High Threshold V
LVDS Differential Input Low Threshold V
White - 150 160 mA (3)a
Black
lcc
TH(LVDS)
-100 - - mV
TL(LVDS)
- 200 220 mA (3)b
- - +100 mV
LVDS Common Mode Voltage VCM 1.125 - 1.375 V (4)
LVDS Differential Input Voltage |VID| 100 - 600 mV (4)
L VDS Terminating Resistor RT - 100 - Ohm -
CE_EN Input Voltage
CABC_EN Input Voltage
High Level V
Low Level V
High Level V
Low Level V
2.3 - 3.6 V -
IHCE
0 - 0.5 V -
ILCE
2.3 - 3.6 V -
IHCABC
0 - 0.5 V -
ILCABC
Power per EBL WG PEBL - 1.32 - W (5)
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
Value
Unit Note
V
CM
V
CM
(4),
=1.2V
(4)
=1.2V
Note (2) I
: the maximum current when VCCS is rising
RUSH
I
: the maximum current of the first 100ms after power-on
IS
Measurement Conditions: Shown as the following figure. Test pattern: black.
www.jxlcd.com
www.jxlcd.com
+3.3V
Q1 2SK1475
VR1
R1
47K
47K
R2
1K
Q2
2SK1470
C2
0.01uF
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
FUSE
C3
1uF
VCCS
(LCD Module Input)
7 / 33
Version 2.0
Page 8
Doc No.: 400038508
|
|
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
VCCS rising time is 0.5ms
Note (3) The specified power supply current is under the conditions at VCCS = 3.3 V, Ta = 25 ± 2 ºC, DC
Current and f
a. White Pattern
= 60 Hz, whereas a power dissipation check pattern below is displayed.
v
b. Black Pattern
www.jxlcd.com
Note (4) The parameters of LVDS signals are defined as the following figures.
Single Ended
www.jxlcd.com
Differential
Active Area
CM
V
0V
V
0V
V
Active Area
VID|
VID|
8 / 33
Version 2.0
Page 9
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (5) The specified power are the sum of LCD panel electronics input power and the converter input
power. Test conditions are as follows.
(a) VCCS = 3.3 V, Ta = 25 ± 2 ºC, f
(b) The pattern used is a black and white 32 x 36 checkerboard, s lide #100 from the VESA fil e
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
(c) Luminance: 60 nits.
= 60 Hz,
v
www.jxlcd.com
www.jxlcd.com
9 / 33
Version 2.0
Page 10
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
LED Light Bar input
Voltage
LED Light Bar input
Current
Power Consumption PL 1.702 2.048 2.352 W
LED Life Time LBL 15000 Hrs (4)
Note (1) LED light bar configuration is shown as below.
Light Bar Feedback
Channels
V
L
I
76 80 84 mA
L
V
L, IL
Min. Typ. Max.
22.4 25.6 28 V
LED
Light Bar
Value
Unit Note
(1)(2) Duty 100%
(3)
Duty=100%
Approval
Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter
with current balancing function to drive LED light-bar.
Note (3) P
Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta =
= IL × V
L
www.jxlcd.com
25 ± 2
L
www.jxlcd.com
o
C and IL = 20.0mA (Per EA) until the brightness becomes 50% of its original value.≦
10 / 33
Version 2.0
Page 11
4. BLOCK DIAGRAM
SC
C
4.1 TFT LCD MODULE
LVDS Display
Data & Clock
VCCS
GND
INPUT CONNECTOR
Data
CLK
V
EDID
EDID
EDID
LVDS INPUT /TIMING
CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
GENERATOR
EDID
EEPROM
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
AN DRIVER I
TFT LCD PANEL
DA TA DRIVER IC
Converter
Input Signals
LED CONVERTER BACKLIGHT UNIT
www.jxlcd.com
www.jxlcd.com
11 / 33
Version 2.0
Page 12
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Symbol Description Polarity Remark
1 VSS Ground
2 VCCS Power Supply ( 3.3 V typ)
3 VCCS Power Supply ( 3.3 V typ)
4 EE_VDD DDC ( 3.3 V typ)
5 NC No Connection
6 EE_SC DDC Clock
7 EE_SD DDC Data
8 Rx0- LVDS Differential Data Input Negative
9 Rx0+ LVDS Differential Data Input Positive
10 VSS Ground
11 Rx1- LVDS Differential Data Input Negative
12 Rx1+ LVDS Differential Data Input Positive
13 VSS Ground
14 Rx2- LVDS Differential Data Input Negative
15 Rx2+ LVDS Differential Data Input Positive
16 VSS Ground
17 RXC- LVDS Clock Data Input Negative
18 RXC+ LVDS Clock Data Input Positive
19 CE_EN Color Engine Enable Input -
20 NC No Connection -
21 NC No Connection
22 VSS Ground
23 NC No Connection
24 NC No Connection
25 VSS Ground
26 NC No Connection
27 NC No Connection
28 VSS Ground
29 NC No Connection
30 NC No Connection
31 VSS Ground
32 VSS Ground
33 VSS Ground
34 NC No Connection
35 LED_PWM PWM brightness control
36 LED_EN LED Enable
37 CABC_EN CABC Enable Input
38 LED_VCCS LED Power
39 LED_VCCS LED Power
40 LED_VCCS LED Power
Note (1) Connector Part No.: IPEX-20455-040E-12 or equivalent
www.jxlcd.com
www.jxlcd.com
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
R0~R5,G0-
G1~G5,B0,B1
-
B2~B5,Hsync,Vsync,DE
LVDS Level Clock
Note (2) User’s connector Part No: IPEX-20453-040T-01 or equivalent
Note (3) The first pixel is odd as shown in the following figure.
12 / 33
Version 2.0
Page 13
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (4) The setting of Color engine and CABC function are as follows.
Pin Enable Disable
CE_EN Hi Lo or Open
CABC_EN Hi Lo or Open
Hi = High level, Lo = Low level.
www.jxlcd.com
www.jxlcd.com
13 / 33
Version 2.0
Page 14
5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL
CLK+
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Rxin2
Rxin1
Rxin0
T/7
IN20 IN19 IN18 IN17 IN16 IN15 IN14
DE B5 B4 B3 B2 Vsync Hsync
IN13 IN12 IN11 IN10 IN9 IN8 IN7
B1 G4 G3 G2 G1 B0 G5
IN6
G0 R3 R2 R1 R0
www.jxlcd.com
www.jxlcd.com
IN5 IN4 IN3 IN2 IN1 IN0
R5
R4
Signal for 1 DCLK Cycle (T)
14 / 33
Version 2.0
Page 15
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input the brighter the color. The table below provides the assignment of
color versus data input.
Data Signal
Color
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Volt age, 1: High Level Voltage
Blue
Cyan
Magenta
Yellow
White
Red(0)/Dark
Red(1)
Red(2)
:
:
Red(61)
Red(62)
Red(63)
Green(0)/Dark
Green(1)
Green(2)
:
:
Green(61)
www.jxlcd.com
www.jxlcd.com
Green(62)
Green(63)
Blue(0)/Dark
Blue(1)
Blue(2)
:
:
Blue(61)
Blue(62)
Blue(63)
0
1
0
0
0
1
1
1
0
0
0
:
:
1
1
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
15 / 33
Version 2.0
Page 16
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
5.4 EDID DATA STRUCTURE
The EDID (Extended Display Identification Data) data formats are to support displays as defined in the
VESA Plug & Display and FPDI standards.
Byte #
(decimal)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Byte #
(hex)
0 Header
1 Header
2 Header
3 Header
4 Header
5 Header
6 Header
7 Header
8 EISA ID manufacturer name (“CMO”)
9 EISA ID manufacturer name (Compressed ASCII)
0A ID product code (N133B6-L02) 21
0B ID product code (hex LSB first; N133B6-L02) 13
0C ID S/N (fixed “0”)
0D ID S/N (fixed “0”)
0E ID S/N (fixed “0”)
0F ID S/N (fixed “0”)
10 Week of manufacture (fixed week code)
11 Year of manufacture (fixed year code)
12 EDID structure version # (“1”)
13 EDID revision # (“3”)
www.jxlcd.com
www.jxlcd.com
14 Video I/P definition (“digital”)
15 Active area horizontal 29.341cm 1D
16 Active area vertical 16.496cm 10
17 Display Gamma (Gamma = ”2.2”)
18 Feature support (“Active off, RGB Color”)
19 Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0
1A Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0
1B Red-x (Rx = “0.585”)
1C Red-y (Ry = “0.349”) 59
1D Green-x (Gx = ”0.337”)
1E Green-y (Gy = ”0.568”)
1F Blue-x (Bx = ”0.155”)
20 Blue-y (By = ”0.128”)
21 White-x (Wx = ”0.313”)
22 White-y (Wy = ”0.329”)
23 Established timings 1
24 Established timings 2
25 Manufacturer’s reserved timings
26 Standard timing ID # 1
27 Standard timing ID # 1
28 Standard timing ID # 2
Field Name and Comments
Value
(hex)
00 00000000
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
FF 11111111
00 00000000
0D 00001101
AF 10101111
00 00000000
00 00000000
00 00000000
00 00000000
35 00110101
13 00010011
01 00000001
03 00000011
80 10000000
78 01111000
0A 00001010
D6 11010110
F5 11110101
95 10010101
56 01010110
91 10010001
27 00100111
20 00100000
50 01010000
54 01010100
00 00000000
00 00000000
00 00000000
01 00000001
01 00000001
01 00000001
(binary)
00100001
00010011
00011101
00010000
01011001
Value
16 / 33
Version 2.0
Page 17
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
41
42
43
44
45
46
47
48
49
50
51
52
53
54 36
55
56
57
58
59
60
61
62
63
64
65 41
66 42
67 43
68 44
69 45
70 46
71 47
72 48
73 49
74 4A
75 4B
76 4C
77 4D
78 4E
79 4F
80 50
81 51
82
83
84
85
29 Standard timing ID # 2
2A Standard timing ID # 3
2B Standard timing ID # 3
2C Standard timing ID # 4
2D Standard timing ID # 4
2E Standard timing ID # 5
2F Standard timing ID # 5
30 Standard timing ID # 6
31 Standard timing ID # 6
32 Standard timing ID # 7
33 Standard timing ID # 7
34 Standard timing ID # 8
35 Standard timing ID # 8
Detailed timing description # 1 Pixel clock (“69.3MHz”, According to
VESA CVT Rev1.1)
37 # 1 Pixel clock (hex LSB first)
38 # 1 H active (“1366”)
39 # 1 H blank (“108”)
3A # 1 H active : H blank (“1366 : 108”)
3B # 1 V active (”768”)
3C # 1 V blank (”16”)
3D # 1 V active : V blank (”768 :16”)
3E # 1 H sync offset (”32”)
3F # 1 H sync pulse width ("22”)
40 # 1 V sync offset : V sync pulse width (”2 : 4”)
# 1 H sync offset : H sync pulse width : V sync of fset : V sync width
www.jxlcd.com
www.jxlcd.com
(”32: 22 : 2 : 4”)
# 1 H image size (”293 mm”) 25
# 1 V image size (”164 mm”) A4
# 1 H image size : V image size (”293 : 164”)
# 1 H boarder (”0”)
# 1 V boarder (”0”)
# 1 Non-interlaced, Normal, no stereo, Separate sync, H/V pol
Negatives
Detailed timing description # 2
# 2 Flag
# 2 Reserved
# 2 FE (hex) defines ASCII string (Mod el Name “N133B6-L02”, ASCII)
# 2 Flag
# 2 1st character of name (“N”) 4E
# 2 2nd character of name (“1”) 31
# 2 3rd character of name (“3”) 33
# 2 4th character of name (“3”) 33
# 2 5th character of name (“B”) 42
52 # 2 6th character of name (“6”) 36
53 # 2 7th character of name (“-”) 2D
54 # 2 8th character of name (“L”) 4C
55 # 2 9th character of name (“0”)
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
01 00000001
12 00010010
1B 00011011
56 01010110
6C 01101100
50 01010000
00 00000000
10 00010000
30 00110000
20 00100000
16 00010110
24 00100100
00 00000000
00100101
10100100
10 00010000
00 00000000
00 00000000
18 00011000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
01001110
00110001
00110011
00110011
01000010
00110110
00101101
01001100
30 00110000
17 / 33
Version 2.0
Page 18
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
56 # 2 9th character of name (“2”)
57 # 2 New line character indicates end of ASCII string
58 # 2 Padding with “Blank” character
59 # 2 Padding with “Blank” character
5A Detailed timing description # 3
5B # 3 Flag
5C # 3 Reserved
5D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII)
5E # 3 Flag
5F # 3 1st character of string (“C”)
60 # 3 2nd character of string (“M”)
61 # 3 3rd character of string (“O”)
62 # 3 New line character indicates end of ASCII string
63 # 3 Padding with “Blank” character
64 # 3 Padding with “Blank” character
65 # 3 Padding with “Blank” character
66 # 3 Padding with “Blank” character
67 # 3 Padding with “Blank” character
68 # 3 Padding with “Blank” character
69 # 3 Padding with “Blank” character
6A # 3 Padding with “Blank” character
6B # 3 Padding with “Blank” character
6C Detailed timing description # 4
6D # 4 Flag
6E # 4 Reserved
6F # 4 FE (hex) defines ASCII string (Model Name“N133B6-L02”, ASCII)
www.jxlcd.com
www.jxlcd.com
70 # 4 Flag
71 # 4 1st character of name (“N”) 4E
72 # 4 2nd character of name (“1”) 31
73 # 4 3rd character of name (“3”) 33
74 # 4 4th character of name (“3”) 33
75 # 4 5th character of name (“B”) 42
76 # 4 6th character of name (“6”) 36
77 # 4 7th character of name (“-”) 2D
78 # 4 8th character of name (“L”) 4C
79 # 4 9th character of name (“0”)
7A # 4 9th character of name (“2”)
7B # 4 New line character indicates end of ASCII string
7C # 4 Padding with “Blank” character
7D # 4 Padding with “Blank” character
7E Extension flag
7F Checksum
32 00110010
0A 00001010
20 00100000
20 00100000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
43 01000011
4D 01001101
4F 01001111
0A 00001010
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
20 00100000
00 00000000
00 00000000
00 00000000
FE 11111110
00 00000000
01001110
00110001
00110011
00110011
01000010
00110110
00101101
01001100
30 00110000
32 00110010
0A 00001010
20 00100000
20 00100000
00 00000000
2F 00101111
18 / 33
Version 2.0
Page 19
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
6. CONVERTER SPECIFICATION
6.1 ABSOLUTE MAXIMUM RATINGS
Symbol Ratings
LED_VCCS -0.3V~25V
LED_PWM -0.3V~5.0V
,LED_EN -0.3V~5.0V
6.2 RECOMMENDED OPERATING RATINGS
Parameter Symbol
Converter Input power supply voltage
Converter Rush Current
Converter Initial Stage Current
EN Control Level
PWM Control Level
Backlight On 2.3 - 5.0 V
Backlight Off
PWM High Level 2.3 - 5.0 V
PWM Low Level
LED_Vccs
ILED
ILEDIS
PWM Control Duty Ratio
PWM Control Permissive Ripple Voltage
PWM Control Frequency f
VPWM_pp
PWM
RUSH
Min. Typ. Max.
5 12 21 V
- - 1.5 A (1)
- - 1.5 A (1)
0 - 0.5 V
0 - 0.5 V
10 - 100 %
5 - 100 % (2)
- - 100 mV
190 - 2K Hz (3)
LED_VCCS =Min. 365 482 588 mA (4)
LED Power Current
LED_VCCS =Typ. 152 201 245 mA (4)
LED_VCCS =Max.
Note (1) ILED
ILED
Measurement Conditions: Shown as the following figure. LED_VCCS = Typ, Ta = 25 ± 2 ºC, f
: the maximum current when LED_VCCS is rising,
RUSH
: the maximum current of the first 100ms after power-on,
IS
www.jxlcd.com
www.jxlcd.com
ILED
87 115 140 mA (4)
200 Hz, Duty=100%.
Value
Unit Note
Approval
=
PWM
LED_VCCS(Typ)
Q1 IRL3303
VR1
R1
47K
R2
1K
47K
0.01uF
Q2
IRL3303
C2
(High to Low)
(Control Signal)
SW=24V
LED_VCCS(Typ)
C1
1uF
FUSE
C3
1uF
(LED Converter Input)
19 / 33
Version 2.0
Page 20
Doc No.: 400038508
≤∗+
+
≤
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
LED_VCC
LED_PWM
LED_EN
ILED
0V
0V
0V
ILED
VLED rising time is 0.5ms
0.5ms
90%
10%
Rush
100ms
ILED
IS
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.
www.jxlcd.com
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
www.jxlcd.com
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.
PWM control frequency f
fN )33.0( f
N
: Integer )3( ≥N
should be in the range
PWM
fN ∗
PWM
)66.0(
f : Frame rate
Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Min., Typ., Max.”,
Ta = 25 ± 2 ºC, f
= 200 Hz, Duty=100%.
PWM
20 / 33
Version 2.0
Page 21
7. INTERFACE TIMING
7.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 50 69.33 80 MHz -
Vertical Total Time TV 771 784 980 TH -
Vertical Active Display Period TVD 768 768 768 TH -
DE
Note (1) Because this module is operated by DE only mode, Hsync and Vsync are ignored.
Vertical Active Blanking Period TVB TV-TVD 16 TV-TVD TH -
Horizontal Total Time TH 1448 1474 1842 T c -
Horizontal Active Display Period THD 1366 1366 1366 Tc -
Horizontal Active Blanking Period THB
TH-THD
108
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
TH-THD
Tc -
INPUT SIGNAL TIMING DIAGRAM
DE
DCLK
DE
DATA
TC
www.jxlcd.com
www.jxlcd.com
T
HD
21 / 33
Version 2.0
Page 22
7.2 POWER ON/OFF SEQUENCE
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
- Power Supply
for LCD, VCCS
- Interface Signal
(LVDS Signal of
Transmitter), V
- Power Supply for
LED Converter,
LED_VCCS
- LED Converter
Dimming Signal,
LED_PWM
- LED Converter
Enable Signal,
LED_EN
Power On
90%
10%
0V
0V
I
0V
Power Off
t1
t2
Valid Data
t6 t5
90%
10%
tA
tC
tE t
90%
tB
t
D
F
t7
90%
10%
t4
t3
10%
www.jxlcd.com
www.jxlcd.com
Restart
10%
Timing Specifications:
0.5≦ t1 ≦ 10 ms
0 ≦ t2 ≦ 50 ms
0 ≦ t3 ≦ 50 ms
t4 ≧ 500 ms
t5 ≧ 200 ms
t6 ≧ 200 ms
0.5≦ t7 ≦ 10 ms
0.5≦ t
0 ＜ t
≦ 10 ms
A
≦ 10 ms
B
t
≧ 10 ms
C
t
≧ 10 ms
D
≧ 10 ms
t
E
t
≧ 10 ms
F
22 / 33
Version 2.0
Page 23
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be
damaged.
Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be
sure to pull down the power supply of LCD VCCS to 0 V.
Note (3) The backlight must be turned on after the power supply for the logic and the interface signal is valid.
The backlight must be turned off before the power supply for the logic and the interface signal is invalid.
Note (4) Please follow the LED converter power sequence as above. If the customer could not follow, it might
cause backlight flash issue during display ON/OFF or damage the LED backlight controller
www.jxlcd.com
www.jxlcd.com
23 / 33
Version 2.0
Page 24
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
8. OPTICAL CHARACTERISTICS
8.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Volt age VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current IL 80 mA
The measurement methods of optical characteristics are shown in Section 8.2. The following items should
be measured under the test conditions described in Section 8.1 and stable environment shown in Note (5).
25±2
50±10
8.2 OPTICAL SPECIFICATIONS
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 300 500 - -
Response Time
Average Luminance of White
Red
Color
Chromaticity
www.jxlcd.com
Viewing Angle
White Variation of 5 Points
Green
Blue
www.jxlcd.com
White
Horizontal
Vertical
TR - 8 12 ms
- 8 13 ms
T
F
L
AVE
Rx
Ry
Gx
Gy
Bx
By
Wx 0.313 Wy
θx+ 40 45
θ
- 40 45 -
x
θY+ 15 20 -
θ
-
Y
δW
5p
=0°, θY =0°
θ
x
Viewing Normal Angle
CR≥10
=0°, θY =0° 70 80 - %
θ
x
170 200 - cd/m
0.584
0.350
0.338
Typ –
0.03
0.563
0.155
0.131
0.329
40 45 -
Typ +
0.03
o
C
%RH
-
-
-
-
-
-
-
Deg.
2
(2), (5),
(7)
(3), (7)
(4), (6),
(7)
(1), (7)
(1), (5),
(7)
(5), (6),
(7)
24 / 33
Version 2.0
Page 25
Note (1) Definition of Viewing Angle (θx, θy):
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (2) Definition of Contrast Ratio (CR):
θX- = 90º
6 o’clock
θ
y- = 90º
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
www.jxlcd.com
L63: Luminance of gray level 63
www.jxlcd.com
x-
y-
Normal
θx = θy = 0º
θy- θy+
θx−
θx+
y+
12 o’clock direction
θ
y+ = 90º
x+
θX+ = 90º
L 0: Luminance of gray level 0
CR = CR (1)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (T
100%
90%
Optical
Response
10%
0%
T
66.67 ms
, TF):
R
Time
R
25 / 33
T
F
66.67 ms
Version 2.0
Page 26
Doc No.: 400038508
(
A
)
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (4) Definition of Average Luminance of White (L
Measure the luminance of gray level 63 at 5 points
L
= [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
AVE
L (x) is corresponding to the luminance of the point X at Figure in Note (6)
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD M odule
LCD Panel
USB2000
AVE
):
CS-2000T
Center of the S creen
500 mm
www.jxlcd.com
www.jxlcd.com
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
= {Minimum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / Maximum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)]}*100%
δW
5p
10mm
6
H/4
2
H
H/4 H/4 H/4
9 10
45
11 12
7
1
8
3
13
Light Shield Room
mbient Luminance < 2 l u x
X
: Test Point
X=1 to 13
10mm 10mm
10mm
W/4 W/4 W/4 W/4
W
26 / 33
Version 2.0
Page 27
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
Note (7) The listed optical specifications refer to the initial value of manufacture, but the condition of the
specifications after long-term operation will not be warranted.
www.jxlcd.com
www.jxlcd.com
27 / 33
Version 2.0
Page 28
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
9. PRECAUTIONS
9.1 HANDLING PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not
to twist or bend the module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
electrical short or damage the polarizer.
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
assembly process.
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is
very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use
Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might
permanently damage the polarizer due to chemical reaction.
Approval
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for
a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contacting with hands, legs or clothes, it must be washed a way thoroug hly with soap.
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the LED wire.
www.jxlcd.com
(11) Pins of I/F connector should not be touched directly with bare hands.
9.2 STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
damage LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
response time will become slowly, and the starting voltage of LED will be higher than the room
temperature.
www.jxlcd.com
9.3 OPERATION PRECAUTIONS
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This
can prevent the CMOS LSI chips from damage during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with converter . Do not disassemble the module or insert anything into the Backlight unit.
28 / 33
Version 2.0
Page 29
10. PACKING
10.1 CARTON
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
www.jxlcd.com
www.jxlcd.com
Figure. 10-1 Packing method
29 / 33
Version 2.0
Page 30
10.2 PALLET
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
www.jxlcd.com
www.jxlcd.com
Figure. 10-2 Packing method
30 / 33
Version 2.0
Page 31
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
11. DEFINITION OF LABELS
11.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
CT: CZZZZXXYYQQRRR
-
Rev. XX
(a) Model Name: N133B6 - L02
(b) Revision: Rev. XX, for example: C1, C2 …etc.
(c) Serial ID: X X
www.jxlcd.com
www.jxlcd.com
X X X X X Y M D L N N N N
AAAA
Serial No.
Product Line
Year, Month, Date
CMO Internal Use
Revision
CMO Internal Use
(d) Production Location: MADE IN XXXX. XXXX stands for production location.
(e) UL logo: “AAAA” especially stands for panel manufactured by CMO China satisfying UL requirement.
“LEOO” and “COCKN” is the CMO’s UL factory code for Ningbo factory..
Serial ID includes the information as below:
(a) Manufactured Date: Year: 1~9, for 2001~2009
Month: 1~9, A~C, for Jan. ~ De c.
Day: 1~9, A~Y, for 1
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 -> Line1, 2 -> Line 2, …etc.
(e) Revision Code: cover all the change
(f) Serial No.: Manufacturing sequence of production
st
to 31st, exclude I , O and U
31 / 33
Version 2.0
Page 32
CT Label
A
S/N CT: CZZZZXXYYQQRRR
CT: Title
C LCD Display Module
ZZZZ
XX Revision. A1, A2…..01,02….etc.
YY Supplier /Site of MFG.CMO:VR/K5/K6
QQ Week/Year of MFG
RRR Serial number. From 000000 to 999999
11.2 CARTON LABEL
Doc No.: 400038508
Issued Date: Dec. 25, 2009
Model No.: N133B6-L02
Approval
ssembly Code.N133B6-L02:BAMB
N133B6-L02
www.jxlcd.com
www.jxlcd.com
20
32 / 33
Version 2.0
Page 33
www.jxlcd.com
www.jxlcd.com
Loading...