Datasheet MVS3008, MVS3001 Datasheet (Perkinelmer)

.

MVS-3000 Series

Machine Vision Strobes

Description

The PerkinElmer MVS 3001 (AC) and
3008 (DC) Machine Vision Strobe systems
produce short duration, high intensity light
pulses for industrial vision applications.
These systems consist of an enclosure
housing, power supply and trigger module,
and a flashlamp. The flashlamp is connect­ed to the power supply through high volt­age connectors.

These systems are particularly useful
when conventional fiber optic or struc­tured lighting systems cannot provide suf­ficient illumination for a particular area.
The MVS 3001 and 3008 drive linear and
ring flashlamps. With an appropriate
reflector and a linear flashlamp, illumina­tion is increased and light can be projected
to a specified area. A ring flashlamp can
be positioned around the lens assembly of
a CCD camera in a production inspection
system, thereby allowing the camera to
be located closer to the object plane.

www.perkinelmer.com/opto

DATASHEET

Lighting

Imaging

Telecom

Machine Vision Illumination Systems

Features

•

Operates both ring and linear flashlamps

•

Flash rates up to 60 Hz

•

Long lamp life

•

Optically isolated trigger

•

60 watts output power

Type

Line input voltage
Input current
Output voltage (1)
Output power (2)
Reference voltage (3)
Tirgger input: (4)

Trigger
Pulse duration

MVS-3001

115/230 ±10% VAC 50/60 Hz (1)

1.2 amps maximum (115 VAC)
1000 volts factory set
60 watts maximum

3 to 10VDC

MVS-3008

15 to 28 VDC
4 amps peak at 24 VDC
1000 volts factory set
60 watts maximum

2 to 10 VDC

For more information e-mail us at [e-mail] or visit our web site at www.perkinelmer.com/opto.

All values are nominal; specifications subject to change without notice.

© 2001 PerkinElmer inc. All rights reserved. 0601

.

USA:
PerkinElmer Optoelectronics
35 Congress Street
Salem, MA 01970
Toll Free: [phone] (USA)
Phone: [phone]
Fax: [phone]

Europe:
PerkinElmer Optoelectronics

Wenzel-Jaksch-Str. 31, D-65199
Weisbaden, Germany
Phone: [phone]
Fax: [phone]

Asia:
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: [phone]
Fax: [phone]

Spectral bandwidth (1)
Flash rate
Flashlamp life (3)
Flash duration (2)
Energy input to flashlamp

200 to 1100+ nm
60 Hz maximum
>10

7

flashes
44 microseconds with 2.5” diameter ring lamp typical
1 joule (2 microfarads at 1kiloVolt)

Optical Specifications (1)

Electrical Specifications

Operating temperature -10 to +110°C (-23 to +43°F)
Storage temperature -40 to +194°C (-40 to +90°F)
Shock and vibration 1.5 g. 5 to 20 Hz per MIL-STD 810C

Environmental Specifications

MVS-3000 Series

www.perkinelmer.com/opto

4.25 (108.0)

7.00
(177.8)

4.12
(104.8)

MATING INPUT
CONNECTOR(S)
SUPPLIED

0.218 X 0.281 MOUNTING SLOT (4 PLCS)

8.50 (215.9)

9.56 (242.8)

DIMENSIONS ARE IN
INCHES (MILLIMETERS)

WEIGHT: 6.1 LBS (2.75kg)

LIGHT OUTPUT PORT

0.75 (19) DIAMETER
CONNECTORS AND

ADAPTERS FOR
VARIOUS TYPES OF
FIBER BUNDLES
ARE AV AILABLE

Mechanical Specifications

Note 1: Factory set at 115 VAC
Note 2: Output voltage may be adjusted using an external voltage reference source. MVS 3001, 150 volts per volt of reference. MVS 3008, 100 volts per volt of reference.
Note 3: Delay between flash command and light output is 8 microseconds typical.

Note 1: Spectral bandwidth may be extended into the ultraviolet by using other flashlamp envelope materials.
Note 2: Measured at 1/3 of peak value.
Note 3: Prior to light output decreasing to 70% of the initial value.

+5 volt pulse into opto-isolator with 150 ohm nominal series resistor
10 to 100 microseconds