Page 1
0.350 (8.89)
0.330 (8.38)
0.040 (1.02)
0.050 (1.27)
NOM
0.200 (5.08)
0.180 (4.57)
1.00 (25.4)
MIN
0.100 (2.54)
NOM
Ø0.230 (5.84)
0.023 (0.58)
0.017 (0.43)
SQ. (2X)
FLAT DENOTES
CATHODE
5°
SUPER BRIGHT T-1 3/4 (5 mm)
LED LAMP - Water Clear
1 of 4 11/12/99 300001A
PACKAGE DIMENSIONS
FEATURES
• Popular T-1 3/4 package
• Super high brightness suitable for outdoor
applications
• Solid state reliability
• Water clear optics
• Standard 100 mil. lead spacing
Parameter Symbol Rating Unit
Operating Temperature T
OPR
-40 to +100 °C
Storage Temperature T
STG
-40 to +100 °C
Lead Soldering Time T
SOL
260 for 5 sec °C
Continuous Forward Current I
F
30 mA
Peak Forward Current
I
F
160 mA
(f = 1.0 KHz, Duty Factor = 1/10)
Reverse Voltage V
R
5V
Power Dissipation P
D
85 mW
ABSOLUTE MAXIMUM RATINGS
(TA= 25°C unless otherwise specified)
NOTES:
1. Dimensions for all drawings are in inches (mm).
2. Lead spacing is measured where the leads emerge from
the package.
3. Protruded resin under the flange is 1.5 mm (0.059") max.
SUPER RED MV801X
MV8013 MV8014
MV8015 MV8016
DESCRIPTION
This T-1 3/4 super bright LED has a narrow viewing angle of 12°
for concentrated light output. The MV801X series is made with an
AllnGaP LED that emits red light at 640 nm. It is encapsulated in
a water clear epoxy lens package.
Page 2
2 of 4 11/12/99 300001A
TYPICAL PERFORMANCE CURVES
Part Number MV8013 MV8014 MV8015 MV8016 Condition
Luminous Intensity (mcd) IF= 20mA
Minimum 630 1000 1600 2500
Typical 940 1500 2400 3500
Forward Voltage (V) IF= 20mA
Maximum 2.4 2.4 2.4 2.4
Typical 2.1 2.1 2.1 2.1
Peak Wavelength (nm) 640 640 640 640 IF= 20mA
Spectral Line Half Width (nm) 20 20 20 20 IF= 20mA
Viewing Angle (°)12121212I
F
= 20mA
ELECTRICAL / OPTICAL CHARACTERISTICS
(TA
=25°C)
SUPER BRIGHT T-1 3/4 (5 mm)
LED LAMP - Water Clear
SUPER RED MV801X
MV8013 MV8014
MV8015 MV8016
100
90
80
70
60
50
40
30
- FORWARD CURRENT (mA)
20
F
I
10
0
1.0 1.5 2.0 2.5 3.0
VF - FORWARD VOLTAGE (V)
Fig. 1 Forward Current vs. Forward Voltage
2.5
2.0
1.5
1.0
(NORMALIZED AT 20 mA)
0.5
RELATIVE LUMNOUS INTENSITY
0.0
01020304050
IF - DC FORWARD CURRENT (mA)
Fig. 2 Relative Luminous Intensity vs. DC Forward Current
Page 3
3 of 4 11/12/99 300001A
SUPER BRIGHT T-1 3/4 (5 mm)
LED LAMP - Water Clear
SUPER RED MV801X
MV8013 MV8014
MV8015 MV8016
1.0
0.5
RELATIVE INTENSITY
0
550 600 650 700
WAVELENGTH - nm REL. LUMINOUS INTENSITY (%)
Fig. 3 Relative Intensity vs Peak Wavelength
0˚
10˚
20˚
30˚
40˚
50˚
60˚
0 20406080100020406080100
-80˚
-90˚
-70˚
-60˚
-10˚
-20˚
-30˚
-40˚
-50˚
Fig. 4 Radiation Diagram
70˚
80˚
90˚
35
30
25
20
15
10
- FORWARD CURRENT (mA)
F
I
5
0
0 20 40 60 80 100
TA - AMBIENT TEMPERATURE (˚C)
Fig. 5 Current Derating Curve
Page 4
4 of 4
SUPER BRIGHT T-1 3/4 (5 mm)
LED LAMP - Water Clear
11/12/99 300001A
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com © 2000 Fairchild Semiconductor Corporation
Loading...