Datasheet MUR 860G ONS Datasheet

Download

Page 1

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

Preferred Devices

SWITCHMODEt Power Rectifiers

This series are state−of−the−art devices designed for use in

switching power supplies, inverters and as free wheeling diodes.

Features

• Ultrafast 25, 50 and 75 Nanosecond Recovery Time

• 175°C Operating Junction Temperature

• Popular TO−220 Package

• Epoxy Meets UL 94 V−0 @ 0.125 in

• Low Forward Voltage

• Low Leakage Current

• High T emperature Glass Passivated Junction

• Reverse Voltage to 600 V

• Pb−Free Packages are Available*

http://onsemi.com

ULTRAFAST RECTIFIERS

8.0 AMPERES, 50−600 VOLTS

Mechanical Characteristics:

• Case: Epoxy, Molded

• Weight: 1.9 Grams (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds

TO−220AC

CASE 221B

PLASTIC

MARKING DIAGRAM

AYWWG

U8xx

A = Assembly Location Y = Year WW = Work Week U8xx = Device Code

xx = 05, 10, 15, 20, 40 or 60 G = Pb−Free Package KA = Diode Polarity

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

July, 2006 − Rev. 7

1 Publication Order Number:

ORDERING INFORMATION

See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.

Preferred devices are recommended choices for future use and best overall value.

MUR820/D

Page 2

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

MAXIMUM RATINGS

MUR

Rating Symbol

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage

Average Rectified Forward Current Total Device, (Rated V

), TC = 150°C

Peak Repetitive Forward Current (Rated V

, Square Wave, 20 kHz), TC = 150°C

Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz)

F(AV)

RRM

RWM

FSM

Operating Junction Temperature and Storage Temperature Range TJ, T

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Opera t i n g Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

THERMAL CHARACTERISTICS

Rating Symbol

Maximum Thermal Resistance, Junction−to−Case

805 810 815 820 840 860

50 100 150 200 400 600 V

8.0 A

16 A

100 A

stg

−65 to +175 °C

MUR

805 810 815 820 840 860

3.0 2.0 °C/W

Unit

ELECTRICAL CHARACTERISTICS

Rating Symbol

Maximum Instantaneous Forward Voltage (Note 1)

= 8.0 A, TC = 150°C)

(iF = 8.0 A, TC = 25°C)

Maximum Instantaneous Reverse Current (Note 1)

(Rated DC Voltage, T (Rated DC Voltage, T

Maximum Reverse Recovery Time

= 1.0 A, di/dt = 50 A/ms)

(IF = 0.5 A, iR = 1.0 A, I

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

= 150°C)

= 25°C)

= 0.25 A)

REC

MUR

805 810 815 820 840 860

0.895

0.975

250

5.0

35 25

1.00

1.30

500

60 50

Unit

1.20

1.50 mA

http://onsemi.com

Page 3

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

MUR805, MUR810, MUR815, MUR820

100

7.0

5.0

3.0

2.0

= 175°C

, INSTANTANEOUS FORWARD CURRENT (AMPS)

1.0

0.7

0.5

0.3

0.2

0.1

0.2 0.50.3 0.7

0.4

INSTANTANEOUS VOLTAGE (VOLTS)

Figure 1. Typical Forward Voltage

0.6

100°C

25°C

0.9 1.1

0.8 1.0

1.2

1000

100

1.0

, REVERSE CURRENT ( A)

0.1

TJ = 175°C

100°C

25°C

0.01 06040 100 120

20 80 200

, REVERSE VOLTAGE (VOLTS)

Figure 2. Typical Reverse Current*

* The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if V

is sufficiently below rated VR.

9.0

8.0

7.0

6.0 SQUARE WAVE

5.0

4.0

3.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

1.0

F(AV)

140 150

, CASE TEMPERATURE (°C)

Figure 3. Current Derating, Case

160

180140

RATED VR APPLIED

170160

180

8.0

6.0

4.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

(NO HEAT SINK)

SQUARE WAVE

20 40 60 80 200

100 120 140 160 180

TA, AMBIENT TEMPERATURE (°C)

Figure 4. Current Derating, Ambient

= 16°C/W

= 60°C/W

http://onsemi.com

9.0

TJ = 175°C

8.0

7.0

6.0

SQUARE WAVE

5.0

4.0

3.0

2.0

, AVERAGE POWER DISSIPATION (WATTS)

1.0

F(AV)

1.0 2.0

3.0 4.0 10

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

5.0 6.0 7.0 8.0 9.0

Figure 5. Power Dissipation

Page 4

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

MUR840

100

7.0

5.0

3.0

2.0

, INSTANTANEOUS FORWARD CURRENT (AMPS)

1.0

0.7

0.5

0.3

0.2

0.1

= 175°C

100°C

0.4

0.8 1.2 1.6

0.6 1.0

INSTANTANEOUS VOLTAGE (VOLTS)

Figure 6. Typical Forward Voltage

25°C

1.4

1000

100

1.0

, REVERSE CURRENT ( A)

0.1

0.01 0 150100 250 300

50 200 500

VR, REVERSE VOLTAGE (VOLTS)

Figure 7. Typical Reverse Current*

* The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if V

is sufficiently below rated VR.

9.0

8.0

7.0

6.0 SQUARE WAVE

5.0

4.0

3.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

1.0

F(AV)

140 150

, CASE TEMPERATURE (°C)

Figure 8. Current Derating, Case

TJ = 175°C

150°C

100°C

25°C

450350

400

RATED VR APPLIED

170160

180

8.0

6.0

4.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

= 16°C/W

= 60°C/W

(NO HEAT SINK)

SQUARE WAVE

20 40 60 80 200

100 120 140 160 180

TA, AMBIENT TEMPERATURE (°C)

Figure 9. Current Derating, Ambient

9.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

, AVERAGE POWER DISSIPATION (WATTS)

1.0

F(AV)

http://onsemi.com

TJ = 175°C

1.0 2.0

F(AV)

SQUARE WAVE

3.0 4.0 10

5.0 6.0 7.0 8.0 9.0

, AVERAGE FORWARD CURRENT (AMPS)

Figure 10. Power Dissipation

Page 5

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

MUR860

100

7.0

5.0

3.0

2.0

, INSTANTANEOUS FORWARD CURRENT (AMPS)

1.0

0.7

0.5

0.3

0.2

0.1

0.4

0.6 1.0

= 150°C

100°C

25°C

0.8 1.2 1.6

INSTANTANEOUS VOLTAGE (VOLTS)

1.4

Figure 11. Typical Forward Voltage

1.8

1000

TJ = 150°C

100

100°C

1.0

, REVERSE CURRENT ( A)

0.1

25°C

0.01 200 500

400

VR, REVERSE VOLTAGE (VOLTS)

Figure 12. Typical Reverse Current*

* The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if V

is sufficiently below rated VR.

9.0

8.0

7.0

6.0 SQUARE WAVE

5.0

4.0

3.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

1.0

F(AV)

140 150

, CASE TEMPERATURE (°C)

Figure 13. Current Derating, Case

RATED VR APPLIED

170160

600100 300

180

9.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

, AVERAGE FORWARD CURRENT (AMPS)

1.0

F(AV)

= 16°C/W

= 60°C/W

(NO HEAT SINK)

SQUARE WAVE

20 40 60 80 200

100 120 140 160 180

TA, AMBIENT TEMPERATURE (°C)

Figure 14. Current Derating, Ambient

14 13 12

9.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

, AVERAGE POWER DISSIPATION (WATTS)

1.0

F(AV)

http://onsemi.com

1.0 2.0

3.0 4.0 10

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

5.0 6.0 7.0 8.0 9.0

Figure 15. Power Dissipation

SQUARE

WAVE

TJ = 175°C

Page 6

1.0

0.5

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

D = 0.5

0.2

0.1

0.05

0.02

0.1

0.05

0.01

SINGLE PULSE

(pk)

DUTY CYCLE, D = t1/t

= r(t) R

JC(t)

= 1.5°C/W MAX

D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T

J(pk)

− TC = P

(pk)

JC(t)

0.01

0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000

r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)

t, TIME (ms)

Figure 16. Thermal Response

1000

500

TJ = 25°C

200

100

C, CAPACITANCE (pF)

1.0 2.0 5.0 20 50 , REVERSE VOLTAGE (VOLTS)

10 100

Figure 17. Typical Capacitance

ORDERING INFORMATION

Device Package Shipping

MUR805 TO−220 MUR805G TO−220

(Pb−Free) MUR810 TO−220 MUR810G TO−220

(Pb−Free) MUR815 TO−220 MUR815G TO−220

(Pb−Free) MUR820 TO−220

50 Units / Rail

MUR820G TO−220

(Pb−Free) MUR840 TO−220 MUR840G TO−220

(Pb−Free) MUR860 TO−220 MUR860G TO−220

(Pb−Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

†

http://onsemi.com

Page 7

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860

PACKAGE DIMENSIONS

TO−220 TWO−LEAD

CASE 221B−04

ISSUE D

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

DIM MIN MAX MIN MAX

A 0.595 0.620 15.11 15.75 B 0.380 0.405 9.65 10.29 C 0.160 0.190 4.06 4.82 D 0.025 0.035 0.64 0.89 F 0.142 0.147 3.61 3.73

G 0.190 0.210 4.83 5.33

H 0.110 0.130 2.79 3.30 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.14 1.52

Q 0.100 0.120 2.54 3.04

R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.14 1.39 T 0.235 0.255 5.97 6.48 U 0.000 0.050 0.000 1.27

MILLIMETERSINCHES

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local Sales Representative

MUR820/D