Page 1
MUR1620CTRG,
MURB1620CTRG,
NRVUB1620CTRT4G
Switch Mode
Power Rectifier
These state−of−the−art devices are designed for use in negative
switching power supplies, inverters and as free wheeling diodes. Also,
used in conjunction with common cathode dual Ultrafast Rectifiers,
makes a single phase full−wave bridge.
Features
• Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package)
• Ultrafast 35 Nanosecond Reverse Recovery Times
• Exhibits Soft Recovery Characteristics
• High T emperature Glass Passivated Junction
• Low Leakage Specified @ 150°C Case Temperature
• Current Derating @ Both Case and Ambient Temperatures
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Complement to MUR1620CT and MURB1620CT Common Cathode
Device
• ESD Ratings:
♦ Machine Model = C (> 400 V)
♦ Human Body Model = 3B (> 16,000 V)
• NRVU Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These are Pb−Free Devices*
www.onsemi.com
ULTRAFAST RECTIFIER
16 AMPERES, 200 VOLTS
TO−220AB
CASE 221A
STYLE 7
1
3
MARKING DIAGRAMS
D2PAK
CASE 418AJ
2, 4
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: MUR1620CTR: 1.9 Grams (Approximately)
MURB1620CTR: 1.7 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2015
January , 2015 − Rev. 9
1 Publication Order Number:
AYWW
U1620RG
KAK
TO−220AB D2PAK
U1620R = Device Code
KAK = Diode Polarity
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
AYWW
U1620RG
KAK
MUR1620CTR/D
Page 2
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
MAXIMUM RATINGS (Per Leg)
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Rated V
Per Leg
, TC = 160°C)
R
Per Total Device
Peak Repetitive Surge Current
(Rated V
, Square Wave, 20 kHz, TC = 140°C)
R
Per Diode
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
Operating Junction and Storage Temperature Range TJ, T
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient (D2PAK)
Symbol Value Unit
V
V
I
F(AV)
RRM
RWM
V
R
200 V
A
8.0
16
I
FM
A
16
I
FSM
stg
100 A
−65 to +175 °C
Symbol Value Unit
R
q
JC
R
q
JA
2.0 °C/W
45 °C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 1)
(i
= 8.0 Amps, TC = 25°C)
F
(iF = 8.0 Amps, TC = 150°C)
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, T
(Rated dc Voltage, TC = 150°C)
= 25°C)
C
Maximum Reverse Recovery Time
= 1.0 Amp, di/dt = 50 Amps/ms)
(I
F
v
F
1.2
V
1.1
i
R
5.0
mA
500
t
rr
85
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%.
ORDERING INFORMATION
Device Package Shipping
MUR1620CTRG TO−220
50 Units / Rail
(Pb−Free)
MURB1620CTRG D2PAK−3
50 Units / Rail
(Pb−Free)
MURB1620CTRT4G D2PAK−3
800 / Tape & Reel
(Pb−Free)
NRVUB1620CTRT4G D2PAK−3
800 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
†
www.onsemi.com
2
Page 3
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
100
70
50
30
20
10
7.0
5.0
3.0
2.0
1.0
, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.7
F
i
0.5
0.3
T
= 175°C
J
25°C
150°C
100°C
1000
500
TJ = 175°C
200
100
150°C
50
20
100°C
10
* The curves shown are typical for the highest
5
voltage device in the voltage grouping. Typical
2
1
reverse current for lower voltage selections can
be estimated from these same curves if V
sufficiently below rated V
25°C
06040 100 120
20 80 200
, REVERSE CURRENT (mA)
R
I
0.05
0.02
0.01
0.5
0.2
0.1
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current* (Per Leg)
16
14
12
10
8.0
6.0
SQUARE WAVE
.
R
160 180140
RATED VR APPLIED
R
= 2°C/W
q
JC
dc
is
R
0.2
0.1
0.2
0 0.60.4 0.8
v
INSTANTANEOUS VOLTAGE (VOLTS)
F,
Figure 1. Typical Forward Voltage (Per Leg)
16
TJ = 175°C
14
12
10
8.0
6.0
4.0
2.0
0
0 4.0
, AVERAGE POWER DISSIPATION (WATTS)
I
F(AV)
P
F(AV)
4.0
2.0
, AVERAGE FORWARD CURRENT (AMPS)
0
1.0 1.41.2
140 150
F(AV)
I
Figure 3. Current Derating, Case (Per Leg)
SQUARE
WAVE
dc
2.0 6.0 10 14
8.0 12 16
, AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Power Dissipation (Per Leg)
160 170
TC, CASE TEMPERATURE (°C)
180
www.onsemi.com
3
Page 4
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
1.0
0
r(t), TRANSIENT THERMAL RESISTANCE
0
R(t) (
C/W)
0.5
D = 0.5
0.2
0.1
0.05
(NORMALIZED)
0.02
0.1
0.05
0.01
SINGLE PULSE
P
(pk)
t
1
t
2
DUTY CYCLE, D = t1/t
Z
= r(t) R
q
JC(t)
q
JC
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T
T
− TC = P
J(pk)
2
(pk)
1
Z
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 100
t, TIME (ms)
Figure 5. Thermal Response
100
50% Duty Cycle
20%
10
10%
5%
2%
1
1%
°
0.1
q
JC(t)
0.01
Single Pulse
0.001
0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 100
PULSE TIME (sec)
Figure 6. Thermal Response, Junction−to−Ambient
1000
900
800
700
600
500
400
C, CAPACITANCE (pF)
300
200
100
0
0.1 0.2 0.3 0.5 0.7 0.2 0.3 0.5 0.7 20 30 50 70
1.0 10 100
, REVERSE VOLTAGE (VOLTS)
V
R
Figure 7. Typical Capacitance (Per Leg)
www.onsemi.com
4
Page 5
L1
H
NOTE 6
e
TOP VIEW
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
PACKAGE DIMENSIONS
D2PAK−3 (TO−263, 3−LEAD)
CASE 418AJ
D1
ISSUE B
VIEW A−A
GAUGE
PLANE
L3
L
DETAIL C
L1
E1
A1
M
0.10 B
H
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. CHAMFER OPTIONAL
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH. MOLD FLASH SHALL NOT EXCEED 0.005
PER SIDE. THESE DIMENSIONS ARE MEASURED
AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AT DATUM H.
5. THERMAL PAD CONTOUR IS OPTIONAL WITHIN
DIMENSIONS E, L1, D1 AND E1.
6. OPTIONAL MOLD FEATURE
A
SEATING
PLANE
M
DIM MIN MAX MIN MAX
A 0.160 0.190 4.06 4.83
A1 0.000 0.010 0.00 0.25
b 0.020 0.039 0.51 0.99
c 0.012 0.029 0.30 0.74
c2 0.045 0.065 1.14 1.65
D 0.330 0.380 8.38 9.65
D1 0.260 −−−− 6.60 −−−−
E 0.380 0.420 9.65 10.67
E1 0.245 −−−− 6.22 −−−−
e 0.100 BSC 2.54 BSC
H 0.575 0.625 14.60 15.88
L 0.070 0.110 1.78 2.79
L1 −−−− 0.066 −−−− 1.68
L2 −−−− 0.070 −−−− 1.78
L3 0.010 BSC 0.25 BSC
M 0808°° °°
MILLIMETERSINCHES
SEATING
B
PLANE
E
E2
A
NOTE 3
A
c2
A
D
DETAIL C
L2
2X
b
0.10 B
c
SIDE VIEW
M
A
A
M
M
VIEW A−A
OPTIONAL CONSTRUCTIONS
RECOMMENDED
SOLDERING FOOTPRINT*
0.436
0.366
0.653
2X
0.169
2X
0.063
0.100
PITCH
DIMENSIONS: INCHES
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
Page 6
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
P
al
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
SEATING
−T−
PLANE
B
4
Q
123
F
T
A
U
C
S
H
K
Z
L
V
R
J
G
D
N
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
B 0.380 0.415 9.66 10.53
C 0.160 0.190 4.07 4.83
D 0.025 0.038 0.64 0.96
F 0.142 0.161 3.61 4.09
G 0.095 0.105 2.42 2.66
H 0.110 0.161 2.80 4.10
J 0.014 0.024 0.36 0.61
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
S 0.045 0.055 1.15 1.39
T 0.235 0.255 5.97 6.47
U 0.000 0.050 0.00 1.27
V 0.045 --- 1.15 ---
Z --- 0.080 --- 2.04
STYLE 7:
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. ANODE
MILLIMETERSINCHES
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/ Patent− Marking.pdf . S CILLC reserves t he right to m ake changes wit hout further notice to any products h erein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical e xperts. SCILLC does not convey any license under i ts p atent rights nor the rights of others. S CILLC p roduct s a re n ot d esigned, i nt ended,
or authorized for use as components in systems intended for surgic al i mplant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, em ployees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable at torney f ees a r ising o ut o f, d irectly o r indirectly, any claim o f p ersonal i njury o r d eath a ssociated w ith s uch u nint ended o r u nauthorized u se, e ven if such claim
alleges that SCILLC was negligent r egarding the design o r manuf acture o f t he p art. SCILLC is an E qual O pportunity/Af firmat ive A ction E mployer . T his l iterature i s subject to all a pplicable
copyright laws and is not for resale in any manner.
UBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
Sales Representative
MUR1620CTR/D
6
Loading...