Page 1
MOTOR START AC ELECTROLYTIC
MSC SERIES
The MSC Series is a range of AC electrolytic capacitors.
These capacitors are most often used to provide the
torque necessary to start AC motors and in other intermittent AC applications.
FEATURES:
• Two .250” Quick Connect terminals
• Round moisture and oil resistant plastic case
• 110VAC to 330VAC
• Quick disconnect terminals
• Recessed terminals
• Long life and high reliability
RATINGS
Capacitance Range:
110/125 Volts - 21 µF to 1200µF
220/250 Volts - 21 µF to 324µF
330 Volts - 21 µF to 259µF
PERFORMANCE SPECIFICATIONS
Operating Temperature Range: -40 °C to +65°C
Power Factor: 10% Max.; 12% ≤30µF
Operating Frequency: 47 - 60Hz
D
H
C
MOUNTING
Vertical mounting of the capacitor with the terminals
up is recommended. However, horizontal mounting is
acceptable providing the vent is located in the up position.
Vertical mounting with the terminals down is not
recommended because the capacitor life may be reduced and the operation of the pressure relief vent impaired.
CLEANING
Solvent residues on the capacitors after cleaning may
penetrate the seal and cause internal corrosion resulting in shortened life. Alcohol or water detergent cleaning is not usually harmful but halogenated cleaning
solvents are not recommended and should be
avoided.
SAFETY
Because the watt-second value of these capacitors is
high, precautions should be taken during the testing
of these devices.
Discharge resistors should be specified when there is
a possibility of a residual charge left on the capacito
or to protect contacts. Mis-application, such as exceeding design limits or applying continuous AC voltage,
may result in destruction or explosion of capacitors.
ORDERING INFORMATION
Series
Voltage
r
Capacitance
MSC 125V 21
52
NTE Electronics, Inc. Voice (973) 748-5089 FAX (973) 748-6224 http://www.nteinc.com
Page 2
MOTOR START AC ELECTROLYTIC
MSC SERIES
110/125VAC Ratings and Dimensions
NTE Type Number Capacitance Case Dimensions - Inch (mm) Case Style
F D H C
MSC125V21 21-25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V25 25-30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V30 30-36 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V36 36-43 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V43 43-52 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V53 53-64 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V72 72-86 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V88 88-106 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V108 108-130 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V124 124-149 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V145 145-174 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V161 161-193 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V189 189-227 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC125V216 216-259 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F
MSC125V233 233-280 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F
MSC125V270 270-324 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F
MSC125V324 324-389 1.438 (36.53) 4.38 (111.25) 0.50 (12.70) G
MSC125V340 340-408 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC125V378 378-454 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC125V400 400-480 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC125V460 460-552 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC125V540 540-648 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC125V590 590-708 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC125V829 829-995 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC125V1000 1000-1200 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
220/250VAC Ratings and Dimensions
NTE Type Number Capacitance Case Dimensions - Inch (mm) Case Style
F D H C
MSC250V21 21-25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC250V25 25-30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC250V30 30-36 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC250V36 36-43 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC250V43 43-52 1.810 (45.97) 3.38 (85.85) 0.50 (12.70) F
MSC250V53 53-64 1.810 (45.97) 3.38 (85.85) 0.50 (12.70) F
MSC250V72 72-86 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC250V88 88-106 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC250V108 108-130 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC250V124 124-149 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC250V130 130-156 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC250V145 145-174 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC250V161 161-193 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC250V189 189-227 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC250V216 216-259 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC250V233 233-280 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC250V270 270-324 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
53NTE Electronics, Inc. Voice (973) 748-5089 FAX (973) 748-6224 http://www.nteinc.com
Page 3
MOTOR START AC ELECTROLYTIC
MSC SERIES
330VAC Ratings and Dimensions
NTE Type Number Capacitance Case Dimensions - Inch (mm) Case Style
F D H C
MSC330V21 21-25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E
MSC330V25 25-30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) F
MSC330V30 30-36 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) F
MSC330V36 36-43 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) F
MSC330V43 43-52 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F
MSC330V53 53-64 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H
MSC330V72 72-86 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC330V88 88-106 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J
MSC330V108 108-130 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC330V124 124-149 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) K
MSC330V145 145-174 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K
MSC330V161 161-193 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) L
MSC330V189 189-227 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) L
MSC330V216 216-259 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) L
54
NTE Electronics, Inc. Voice (973) 748-5089 FAX (973) 748-6224 http://www.nteinc.com
Loading...