Page 1
ON Semiconductor
Silicon Pin Diode
This device is designed primarily for VHF band switching
applications but is also suitable for use in general–purpose switching
circuits. It is supplied in a cost–effective TO–92 type plastic package
for economical, high–volume consumer and industrial requirements.
• Rugged PIN Structure Coupled with Wirebond
Construction for Optimum Reliability
• Low Series Resistance @ 100 MHz
RS = 0.7 Ohms (Typ) @ IF = 10 mAdc
• Sturdy TO–92 Style Package for Handling Ease
MAXIMUM RATINGS
Rating Symbol Value Unit
Reverse Voltage V
Forward Power Dissipation @ TA = 25°C
Derate above 25°C
Junction Temperature T
Storage Temperature Range T
ELECTRICAL CHARACTERISTICS (T
Characteristic Symbol Min Typ Max Unit
Reverse Breakdown Voltage
(IR = 10 µAdc)
Diode Capacitance
(VR = 15 Vdc, f = 1.0 MHz)
Series Resistance (Figure 5)
(IF = 10 mAdc)
Reverse Leakage Current
(VR = 15 Vdc)
A
P
= 25°C unless otherwise noted)
R
D
J
stg
1
Anode
20 Vdc
400
4.0
+125 °C
–55 to +150 °C
V
(BR)R
C
T
R
S
I
R
MPN3404
SILICON PIN
SWITCHING DIODE
2
Cathode
1
2
CASE 182–06, STYLE 1
TO–92 (TO–226AC)
mW
mW/°C
20 — — Vdc
— 1.3 2.0 pF
— 0.7 0.85 Ω
— — 0.1 µAdc
Semiconductor Components Industries, LLC, 2001
November, 2001 – Rev. 2
1 Publication Order Number:
MPN3404/D
Page 2
1.8
MPN3404
TYPICAL CHARACTERISTICS
50
1.6
1.4
1.2
1.0
0.8
, SERIES RESISTANCE (OHMS)
S
R
0.6
0.4
2.0 6.0 8.0 10
0 4.0 12 14
IF, FORWARD CURRENT (mA)
Figure 1. Series Resistance Figure 2. Forward Voltage
10
7.0
5.0
4.0
3.0
, DIODE CAPACITANCE (pF)
2.0
T
C
1.0
0
-3.0 -18-6.0 -21-9.0 -12
VR, REVERSE VOLTAGE (VOLTS)
T
A
= 25°C
-15+3.0
, FORWARD CURRENT (mA)
F
I
µ
, REVERSE CURRENT ( A)
R
I
0.004
0.001
40
30
20
10
100
4.0
1.0
0.4
0.1
0.04
0.01
T
= 25°C
A
0
0.5
VF, FORWARD VOLTAGE (VOLTS)
40
10
VR = 15 Vdc
-60
0 +100
T
, AMBIENT TEMPERATURE (°C)
A
0.80.6 0.90.7
1.0
+140+60+20-20
Figure 3. Diode Capacitance
Figure 4. Leakage Current
http://onsemi.com
2
Page 3
MPN3404
PACKAGE DIMENSIONS
TO–92 (TO–226AC)
CASE 182–06
ISSUE L
SEATING
PLANE
A
R
P
XX
D
G
H
V
12
N
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND ZONE R IS
L
D
K
J
SECTION X–X
C
STYLE 1:
PIN 1. ANODE
2. CATHODE
UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.21
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
G 0.050 BSC 1.27 BSC
H 0.100 BSC 2.54 BSC
J 0.014 0.016 0.36 0.41
K 0.500 --- 12.70 ---
L 0.250 --- 6.35 ---
N 0.080 0.105 2.03 2.66
P --- 0.050 --- 1.27
R 0.115 --- 2.93 ---
V 0.135 --- 3.43 ---
MILLIMETERSINCHES
N
http://onsemi.com
3
Page 4
MPN3404
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
http://onsemi.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MPN3404/D
4
Loading...